• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.12
• /
• pp.1381-1388
• /
• 2014

This paper is proposed a wavelet-based the order statistics MAD(Median Absolute Deviation) method of SAR(Synthetic Aperture Radar) image for image enhancement. also The method of compared and defined the threshold the wavelet coefficients using MAD of the wavelet coefficients of the detail subbands was proposed to effectively image enhancement. In order to complement the disadvantage, the threshold of the proposed method sets up the image statistic and excludes the distortion. The hardware design is used FPGA of Xilinx and DSP system for the image enhancement and compressed encoding of the proposed algorithm. Therefore the proposed method is totally verified by comparing with the several other images.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.06c
• /
• pp.385-388
• /
• 2007

지식베이스 시스템의 중요한 구성 요소로는 유용한 지식베이스의 어떤 조합이 주어진 과업을 위해서 선택된 문제 해결자의 요구사항을 만족시키는지를 고찰하는 지식베이스 집합과 문제 해결자들의 집합을 들 수 있다. 가능한 조합을 인식하는 것은 일련의 제약만족문제를 실험하는 것과 해결될 수 없는 것을 제거하는 것을 필요로 하는데, 제약만족 문제의 모순성 발견을 신속히 하기 위해 본 연구에서는 제약을 제거함에 의해서 제약만족문제를 완화시키는 방법을 사용하였다. 완화 접근법을 시험하기 위해서, 기존의 급성복통과 관련된 지능형 질환 진단 시스템(A-IDS-DAAP)과 제약을 제거함에 의해서 제약만족문제를 완화시키는 방법을 적용한 급성복통과 관련된 지능형 질환 진단 시스템(CR-IDS-DAAP)을 가지고 실험을 하여 평균 수행시간을 감소시켜 시스템의 성능을 향상시키게 되었다.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.7
• /
• pp.1980-1987
• /
• 1999

Restored image is always lower quality than original one due to distortion and noise. The purpose of image restoration is to improve the image quality by fixing the noise or distortion information. One category of spatial filters for image restoration is linear filter. This filter algorithm is easily implemented and can be suppressed the Gaussian noise effectively, but not so good performance for spot or impulse noise. In this paper, we propose the nonlinear spatial filter algorithm for image restoration called the optimal adaptive multistage filter(OAMF). The OAMF is used to reduce the filtering time, increases the noise suppression ratio and preserves the edge information. The OAMF optimizes the adaptive multistage filter(AMF) by using weight learning algorithm of back-propagation learning algorithm. Simulation results of this filter algorithm are presented and discussed.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.4
• /
• pp.449-459
• /
• 2000

The original Mindlin-type degenerated shell element perform reasonably well for moderately thick shell structures. However, when full integration for analysis of thin shell is used to evaluate the stiffness matrix, the stiffness of shell element is often over-estimated due to shear or membrane locking phenomena. To correct this problem, the formulation of the new degenerated shell element is derived by the combination of two different techniques. The first type of elements(TypeⅠ) has used assumed shear strains in the natural coordinate system to overcome the shear locking problem, the reduced integration technique in in-plane strains(membrane strains) to avoid membrane locking behaviour. Another element(TypeⅡ) has applied the assumed strains to both of membrane strain and transverse shear strains. The improved degenerated shell element has been tested by several numerical problems of shell structures. Numerical results indicate that this shell element shows fast convergence and reliable solutions.

• Journal of the Korean Magnetics Society
• /
• v.8 no.3
• /
• pp.161-168
• /
• 1998

In this paper, a algorithm is proposed, which is applicable to the transient analysis of diffusion equations by combined use of the Laplace transform and the finite element method. The proposed method removes the time terms using the Laplace transform and then solves the associated equation with the finite element method. The solution which is solved at frequency domain is transformed into time domain by use of the Laplace inversion. To verify the proposed algorithm, a heat conduction problem is analysed. And the solution showed a good agreement with analytic solution. Because the time-step method is not needed, the proposed method is very useful in solving various kinds of diffusion equations.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.265-270
• /
• 1995

In orthogonal cutting a new approach for modeling of burr formation process when tool exits workpiece is proposed. The approach is based on the rigid-plastic FEM combined with the ductile fracture criterion and the element kill method. The approach is applied to simulate a plane strain cutting process. The results of the FEM are compared with those of the experiment. It is shown that the fracture location and fracture angle as well as cutting force can be predicted using the proposed approach with a good correlation to experimental results.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.4
• /
• pp.125-133
• /
• 1998

The objective of this study is to propose a new approach for modelling of burr formation process during orthogonal cutting when the tool exits the workpiece. This approach is based on the rigid-plastic finite element method combined with the ductile fracture criterion and the element kill method. This approach is applied to orthogonal cutting process to predict the fracture location and the fracture angle as well as the cutting force. To validate this approach, orthogonal cutting tests inside SEM(scanning electron microscope) at very low speed are carried out using A16061-T6 to observe the behavior of the material during the chip and the burr formation. The results of the experiment are compared with those of the finite element simulation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.11
• /
• pp.5334-5337
• /
• 2013

In this paper, the structure of traffic lights removed the wire for the completion of urban aesthetics is analyzed. The finite element model consists of shell elements from three-dimensional CAD model of actual traffic signal. Traffic light pole, horizontal stand shape, thickness, stiffeners, etc. are considered in this study. Analysis of stress and deformation is performed by applying wind load. When the wind load is applied, the result on traffic signal is analyzed. This study is to perform the basic tasks for improving the design.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 1997.11a
• /
• pp.63-68
• /
• 1997

본 연구에서는 직물 디자인의 시각적 요소와 관련된 감성 모형을 제안하고, 아울러 감성 모형을 구성하는 과정에서 사용될 수 있ㅅ는 대안적인 방안을 제시하고자 한다. 이를 위해 설문 조사와 관련 잡지, 신문, 사전 등을 통한 광범위한 어휘 수집이 이뤄졌으며 수집된 어휘는 1,000여 개였다. 수집된 어휘에 대해 이해도 및 적절성 평가를 실시하여 직물 제품과 관련된 감성을 표현하기에 부적절하거나 이해하기 어려운 어휘들을 제거하여 360개의 감성 어휘로 정리하였다. 사용 빈도가 높은 어휘 108개를 이용하여 자유 연상과제를 실시하였으며 그결과 어휘들 간 관계에 대한 연결망을 그려낼 수 있었다. 어휘망에서 중심적인 대표어 역할을 하는 18개 어휘를 추출하여 1차로 유사성평정을 실시하였으며 다차원 척도법으로 분석한 결과 어휘들 간 관계를 표현하기 위해 필요한 차원은 네 개였다. 1차로 구성된 모형의 타당성을 확인하기 위해 추가로 각각 20개씩의 어휘를 새로이 추출하여 2회에 걸쳐 유사성 평정을 실시한 결과, 직물 디자인의 시각적 요소와 관련된 감성을 모형화하기 위해서는 세 개차원이면 충분하다고 생각된다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1997.11a
• /
• pp.20-20
• /
• 1997

고강도 알루미늄 대형 링롤재를 급냉할 때 발생하는 잔류응력을 2차원 및 3차원 유한 요소 해석하였고, 3단계 절단법에 의해 측정된 변형율과 ABAQUS의 요소제거 기능을 이용한 해석 값을 직접 비교하였다. 급냉후 잔류응력 해석결과는 2단과시효 후 측정값과 비슷한 경향을 보였으나 그 절대값의 차이가 크게 나타났다 이는 시편 링의 높이가 작아 실험 값이 부정확하였기 때문이며 링의 높이를 증가시켜 높이방향으로 균일한 응력분포를 갖도록 하면 그 차이가 감소될 것으로 판단된다. 잔류응력을 측정하는 3단계 절단 과정을 모사한 3차원 해석결과와 측정된 변형율을 직접 비교함으로써 실험과 해석의 정확성을 향상시킬 수 있도록 하였다. 이로부터 잔류응력이 존재하는 일반적인 알루미늄 구조물의 기계가공에 의한 변형을 정확히 예측할 수 있는 기반을 마련하였으며 구조해석 시 잔류응력의 영향을 고려할 수 있게 되었다.