• The Korean Journal of Rheology
• /
• v.7 no.2
• /
• pp.139-149
• /
• 1995

실제 복합재료 제조공정에 널리 이용되는 등방성 탄소섬유직조와 에폭시수지에 대 해서 수지의 유동을 일방향으로 근사하여 비정상상태 투과계수와 모세관압을 측정하는 실험 을 수행하였고 적층된 섬유직조의 기공율, 금형 주입압력 그리고 섬유직조의 적층수에 따른 수지유동특성을 분석하였다. 또한 금형 충전과정에 대한 유동가시화 실험을 수행하여 유동 선단과 충전시간을 측정하였다. 전체 조업압력에 미치는 모세관압의 영향을 규명하기 위해 일정 유입압력에 따른 금형충전과정에 대하여 유한요소/관할부피 방법을 이용한 수치모사를 수행하였다. 함침공정의 수지유동에서 비정상상태 투과계수는 섬유직조의 기공율에 따라 급 격히 증가하였고 에폭시수의 표면장력에 기인한 모세관압은 기공율 감소에 따라 급격히 증 가하였다. 동일한 기공율에서 섬유직조의 적층수가 증가함에 따라 투과계수와 모세관압은 모두 증가하는 경향을 보였다. 또한실험에서 측정한 모세관압을 고려하여 유동선단과 금형 충전시간을 수치모사방법으로 예측ㄷ한 결과는 유동가시화 실험에의한 결과와 잘 일치함을 보였다. 이결과로부터 낮은 압력에서 조업하는 RTM공정에서 모세관압효과는 유동선단과 금형 충전시간을 예측하는데 기여함을 알수 있다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.95-95
• /
• 2021

전 세계 담수 자원의 예측 및 관리에 있어서 유출량 변화의 예측은 중요하다. 하지만 강수량 대비 유출량의 비율인 유출율이 수자원 시스템에 중요한 영향을 미치는지에 대한 여부는 여전히 불분명하다. 본 연구에서는 전 세계의 1,636개 관측소에서 관측된 유출량과 강수량 자료를 이용하여 최근 60년 (1956-2015) 동안 유출량, 강수량, 증발산량의 관계에 있어서 유출율의 역할에 관해 연구하였다. 수문 기후학적으로 습한 지역과 건조한 지역을 구분할 수 있는 임계값으로 유출율을 사용할 수 있다는 점을 Budyko 공간에서 적용하여 건조 지수와의 비교를 통해 발견할 수 있었다. 유출량 변화에 대한 상세한 분석을 위해 강수량 및 증발산량 변화율에 따라 6가지의 범주를 설정하였고 그 결과 대부분의 관측소에서는 강수량의 변화와 일관된 방향으로 유출량이 변화하는 것으로 밝혀져 유출량의 변화는 강수 변화에 더 민감하다는 결론을 얻었으며 모든 범주에 있어서 유출율은 강수량과 증발산량의 변화에 의한 유출량 변화의 크기에 상당한 영향이 있음이 밝혀졌다. 본 연구의 결과들을 통해 우리는 기후 변화에 따른 유출량 변화에 대한 예측성 향상에 있어서 유출율에 대한 물리적인 이해가 잠재적인 주요한 요소라고 제안한다. 토지 피복 및 토지 이용과 같은 인위적 영향은 유출율을 직접 감소 또는 증가시켜 유출량의 민감도를 변화시킬 수 있다. 본 연구에서 제안된 수치적인 접근 방식은 수자원 가용성에 대한 기후 변화 및 인위적 영향을 완화하기 위해 실행 가능한 정보를 제공할 것으로 보인다.

• Korean Journal of Construction Engineering and Management
• /
• v.10 no.1
• /
• pp.102-113
• /
• 2009

When planning and promoting apartment house development project, it is very important to carry on profitability in planning stage through realistic evaluation and analysis about distributability. Especially, the analysis about project feasibility through forecasting the early distribute rate is crucial stage because it could evaluate overall expecting benefit and feasibility of the project. However, researches and studies related with forecasting profitability and distributabilty of construction development project are insufficient. Also there is a big gap of the standard for evaluating early distribute rate between government and individual corporations. So it is necessary to study about the evaluating early distribute rate. In this point, this study aims to present effective evaluating standard(criteria) which is for forecasting profitability and distribute rate through analyzing various factors and weight of apartment house development projects. This study compared and analyzed examples of the real initial rate of private apartment sale based on the government estimated standard. Among estimated index, omitted items and factors to be additionally considered are combined as 33 detail appraisal contents of 4 parts 9 items by allotting them based on the data about priority of all considered factors.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.04a
• /
• pp.77-79
• /
• 2000

주문형 비디오 시스템에서 비디오 서버의 입출력 대역폭은 지연 시간을 증가시키는 원인이 되는 중요한 자원이다. 공유를 통하여 비디오 서버의 입출력 요청을 감소시키는 다수의 방법들: 일괄처리, 브리징, 피기백킹이 제안되었다. 일괄처리는 같은 객체에 대한 요청들을 묶어서, 기억장치 서버에 대한 하나의 입출력 요청을 만드는 것이고, 피기백킹은 객체의 대응하는 입.출력 스트림들을 그룹으로 서비스할 수 있는 하나의 스트림으로 병합하기 위하여 진행중인 요청들의 디스플레이 율을 변경하는 정책이다. 본 논문에서는 인기 있는 비디오에 대한 요청들이 가능한 한 스케줄 될 수 있도록 비디오 서버의 입출력 스트림 용량을 예약해 두고 상반관계에 있는 두요소: 스트림 요청의 지연시간과 입출력 요청의 감소를 적절히 절충한 하이브리드 장치 대역폭 감소 정책을 제안하고, 시뮬레이션을 통하여 제안하는 정책의 성능을 평가한다.

• Journal of the Korean Institute of Gas
• /
• v.15 no.6
• /
• pp.14-19
• /
• 2011

The objective of this study was to investigate the effect of the thickness eccentricity on the collapse pressure of a subsea pipeline subjected to external pressure. The collapse behavior of the subsea pipeline containing initial imperfection was evaluated using elastic-plastic finite element (FE) analyses. API 5L X65 and API 5L X80 Pipelines with the thickness eccentricity values between 4~16% were adopted to investigate the plastic collapse under hydrostatic pressure. A parametric study was shown that the plastic collapse pressure decreased when either the thickness eccentricity or the ratio of diameter to thickness increased.

• Journal of Internet of Things and Convergence
• /
• v.8 no.4
• /
• pp.41-47
• /
• 2022

Smoothing is a transmission plan that converts video data stored at a variable bit rate into a fixed bit rate. Algorithms for smoothing include CBA, which aims to minimize the number of transmission rate increases, MCBA, which minimizes the number of transmission rate changes, and MVBA algorithms that minimize the amount of transmission rate change. This paper compares the proposed algorithm with the CBA algorithm with various video data, buffer size, and performance evaluation factors as a follow-up to the proposed smoothing algorithm that minimizes (maximizes) the transmission rate increase (decrease) when the server requires more bandwidth The evaluation factors used were compared with the number of changes in the fps rate, the minimum fps, the average fps, fps variability, and the number of frames to be discarded. As a result of the comparison, the proposed algorithm showed superiority in comparing the number of fps rate changes and the number of frames discarded.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.1
• /
• pp.1-12
• /
• 1990

The study is concerned with the analysis of combined forging of non-axisymmetric shapes with inclined protrusions by UBET technique. Work hardening is considered for the given range of strain rate during the forging process. A complex shape with inclined cavities is analyzed by subdividing the workpiece into finite UBET elements for which simple velocity fields are applicable. An experimental set-up was designed and manufactured for the experiment, and experiments are carried out with lead billets. The devised set-up can be used for closed-die forging of complex shapes with protrusions in which the dies can be separated automatically for easy removal of the forged products. Based on the derived kinematically admissible velocity fields for corresponding UBET elements, general computer programs have been developed. Since the energy dissipation rate for each elemental region is provided by subprograms (Subroutine or Function), the developed program can be applied to the forging problems of various shapes. The present study has shown that the method developed can be effectively applied to forging of non-axisymmetric shapes with complicated protrusions.

• Journal of the Korean Geotechnical Society
• /
• v.17 no.6
• /
• pp.5-14
• /
• 2001

This paper describes a simplified design method of stabilizing piles based on an experimental tests and an analytical study which can take into account the safety factor of slope and pile spacing. The nonlinear characteristics of the soil-pile interaction for stabilizing piles are modeled by using load transfer method. The interaction factors due to pile spacing and cap rigidity were estimated by using a three dimensional nonlinear finite element approach and laboratory tests. Based on the results obtained, the interaction factors are proposed quantitatively for one-row pile groups with spacing-to-diameter ratios varying far 2.5 to 7.0. The Bishop's simplified method of slope stability analysis is extended to incorporate the soil-pile interaction and determine the safety factor of the reinforced slope. Through the comparative study, it is found that the prediction by present approach is in relatively good agreement with the results of centrifuge tests and field tests and three dimensional finite element analyses.

• Journal of the Korean Geosynthetics Society
• /
• v.18 no.2
• /
• pp.45-54
• /
• 2019

This paper describes the results of finite element analysis (FEA), in order to investigate a characteristics of pile pullout behavior according to the conditions of the relative density and fines content in original ground. In the FEA, a boundary elements and strength reduction factors ($R_{inter}$) on pile-soil interface were applied to simulate appropriately the shear behavior at the pile-soil interface, and then the reliability of numerical analysis method was verified by comparison of FEA results and previous experimental research(You et al., 2018). In addition, a the deformation characteristics at the pile-soil interface and determination method of $R_{inter}$ value was laid out. The results showed that the FEA, based on the analytical model applied in this study simulates appropriately the characteristics of the pile-soil interface by pullout model test of pile. In order to apply the suggested $R_{inter}$ value, it is necessary to consider the condition of the relative density and the fines content in ground.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.05a
• /
• pp.387-390
• /
• 2006

Conventional spinning, shear forming and flow forming techniques are being utilized increasingly due to the great flexibility provided for producing complicated parts, enabling customers to optimize designs and reduce weight and cost, all of which are vital, especially in automotive industries, space shuttle, a munitions industry. The deformation mechanism of conventional spinning and shear forming is studied in this paper through analysis. The forming loads of a spin formed dome in an Al launch vehicle fuel tank was studied analysis and a simple FE model to predict the forming loads of the dome was proposed. The analysis is carried out to study the effects of feed rates and thickness reduction on material flow.