• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.8
• /
• pp.566-573
• /
• 2019

In order to obtain high-quality images by motion compensation in the airborne synthetic aperture radar (SAR), accurate motion sensing in image acquisition section is necessary. Especially, reducing relative position error and discontinuity in motion sensing is important. To overcome the problem, we propose a pre-parametric error modeling (P-PEM) algorithm which is a real-time motion sensing algorithm for the airborne SAR in this paper. P-PEM is an extended version of parametric error modeling (PEM) method which is a motion sensing algorithm to mitigate the errors in the previous work. PEM estimates polynomial coefficients of INS error which can be assumed as a polynomial in the short term. Otherwise, P-PEM estimates polynomial coefficients in advance and uses at image acquisition section. Simulation results show that the P-PEM reduces relative position error and discontinuity effectively in real-time.

• Proceedings of the Optical Society of Korea Conference
• /
• 1988.06a
• /
• pp.37-40
• /
• 1988

보조전극을 사용하여 전기방전을 궤환 조절하여 연속출력 탄산가스 출력을 안정화하였다. 보조전극은 양극과 접지되어 있는 음극사이에서 음그근처에 설치하였으며 레이저 출력을 HgCdTe-detector로 측정하여 레이저 출력의 요동에 따라 보조전극에 인가되는 전압이 변화되도록 하였다. 보조전극을 사용하여 레이저 출력을 안정화시킨 결과 레이저 출력의 요동은 안정화하지 않았을때의 레이저출력 요동의 1/10 이하로 감소하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.8
• /
• pp.640-647
• /
• 2018

This study analyzes the tracking accuracy(tracking errors) of fighter radar. Measurement error, detection failure, and radar cross section(RCS) fluctuation in radar measurements degrade the measurement quality and hence affect the tracking accuracy. Therefore, these radar measurement characteristics need to be considered when analyzing the tracking accuracy. In this paper, a method for analyzing the tracking accuracy is proposed; this method considers the detection error, detection probability, and RCS fluctuation. Results from experiments conducted with the proposed method show that the detection probability and RCS fluctuation affect tracking accuracy.

• Applied Chemistry for Engineering
• /
• v.9 no.6
• /
• pp.852-856
• /
• 1998

Effects of packing materials on the pressure fluctuations in a fluidized bed have been analysed using statistical method to interpret fluidized bed behavior. The experiments were carried out in a fluidized bed of 6.7cm - ID, and the experimental variables were particle size and its distributions, fluidizing velocity, aspect ratio, and packing materials, etc. Screen packings are used as packing material, the properties of the pressure fluctuations in the fluidized bed were measured by a differential pressure transducer. The measured properties for the pressure fluctuations were the mean, the standard deviation, and the major frequency of the power spectral density functions, etc. The standard deviations of the pressure fluctuations have been slightly affected in the radial directions of fluidized bed, and almost constant in axial directions the height above 4.5cm of the distributor of fuidized bed without packing materials. The major frequency decreased with increaing packing size, whereas it showed maximum at 10% of packing materials. It has been found that the standard deviation of the pressure fluctuations can effectively explain the fluidized phenomena, and the packing materials severely affected the properties of the pressure fluctuations.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2004.05a
• /
• pp.97.1-97.1
• /
• 2004

• Korean Journal of Optics and Photonics
• /
• v.7 no.3
• /
• pp.219-226
• /
• 1996

The wave-particle duality of light plays important role in quantum optics and it often produces a result different from that of classical wave theory. In this paper, we study the intensity and phase fluctuation of light which show certain change after light goes through a beam splitter, and show the difference between the classical and quantum theory. We show quantitatively that the uncertainty of phase increases at the output of a beam splitter due to the contribution of vacuum fluctuation, even though classical theory predicts no such change in phase fluctuation. The expectation values of normally ordered operators are introduced where the vacuum effect is naturally eliminated, and it is shown that the classical informations are recovered in this way. Analysis on the expectation values produces a distinction between measured phase and inferred phase values and they are related through the contribution of vacuum field.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.683-683
• /
• 2012

영상 수위 계측 방법은 카메라와 목자판만으로 이루어진 비교적 간단한 시스템과 육안으로 수위를 직접 확인할 수 있다는 장점을 가지고 있으나 실제 하천에서 장기간 운영시 목자판이 하천수와 직접 접촉하면서 필연적으로 발생하는 오염, 훼손, 부유물 부착 및 걸림 등의 이유로 목자판의 시인성이 떨어지면서 수면을 정확히 인식하지 못하여 오측이 증가하는 문제점이 발생하였다. 본 연구는 이와 같은 기존 수면인식방법의 문제점을 해결하기 위하여 새로운 수면인식방법을 제안한다. 새로운 수면인식방법은 목자판 영역과 수역이 포함된 시차가 있는 두 장 이상의 연속적인 영상에서 유수의 이동, 바람에 의한 물결 등으로 인해 초래된 수역의 요동을 판단하여 수면을 인식하고 수위를 계측하는 방법이다. 이 방법의 성능을 검증하기 위하여 목자판이 오염된 경우에 대하여 실내 및 현장 실험을 실시하였다. 두 경우의 실험결과에서 모두 기존 수면인식방법에서는 오염된 부분을 수면으로 잘못 인식하였으나, 새로운 방법에서는 수면을 정확하게 인식하여 올바른 수위를 측정할 수 있었다. 따라서 새로운 수면인식방법을 이용하면 기존 수면인식방법보다 정확도를 향상시킬 수 있을 것이며, 홍수시 목자판에 부유물이 걸리거나 목자판이 일부 파손된 경우, 목자판이 다단으로 설치된 경우 등에서도 수면을 정확하게 인식할 수 있을 것으로 기대된다.

• Proceedings of the KAIS Fall Conference
• /
• 2010.05b
• /
• pp.1237-1240
• /
• 2010

본 연구에서는 유동층반응기를 이용하여 왕겨의 탄화반응을 수행하였다. 탄화반응은 내경 40mm, 높이 1.8m의 유동층을 사용하였으며, 분산판은 다공성 스테인레스스틸을 사용하였다. 탄화반응은 질소를 이용하여 수행하였다. 왕겨 주입입자 크기는 직경 2.0mm, 0.715mm, 0.359mm, 0.194mm를 각각 사용하였으며, 유동층의 온도는 $400^{\circ}C$, $500^{\circ}C$, $600^{\circ}C$, $700^{\circ}C$에서 탄화특성을 측정하였다. 또한 유동층의 매질로는 직경 1.0mm의 Co-Mo-Fe/$Al_2O_3$ 촉매를 사용하였으며, 탄화물은 유동층상부에 설치된 사이크론에 의하여 포집분리되었다. 탄화시 유동층 내부의 현상을 압력요동을 이용하여 해석하였으며, 압력신호로부터 평균압력, 압력요동의 표준편차, 주진동수, power spectrum density function을 계산하여 층내현상을 해석하였다. 층내온도, 유동화속도, 공급 입자크기에 따른 층내현상을 압력요동특성치를 이용하여 해석할 수 있었다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3274-3279
• /
• 2009

The elutriation characteristics of particle size distribution were investigated in a gas-solid fluidized bed. Experiments were carried out with the mulit-sized particles of Gaussian distributions. The elutriation rate constant obtained from the experiment was correlated with the standard deviation of particle size and the dimensionless group of the velocity ratio. The standard deviation of pressure fluctuation, mean pressure, major frequency and power spectrum density function were calculated by pressure fluctuation properties. Size distribution of elutriated particles and pressure fluctuations were measured for the particle size distribution of particle system depended largrly on the size distribution. Characteristics of fluidization and elutriation were greatly influenced by the particle size distribution and these characteristics could be interpreted with pressure fluctuation properties.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2016.11a
• /
• pp.181-182
• /
• 2016