• 제목/요약/키워드: 요동속도

검색결과 44건 처리시간 0.026초

왕복요동 교반조의 자유 표면에서의 산소흡수속도 (Oxygen Transfer Rate from Liquid Free Surface in Reciprocally Shaking Vessel)

  • 고승태
    • Korean Chemical Engineering Research
    • /
    • 제59권2호
    • /
    • pp.276-280
    • /
    • 2021
  • 왕복 요동 교반조의 액체 표면에서의 산소 전달 속도에 대해 연구하였다. 왕복 요동 교반조의 소요 동력은 선회요동 교반조와는 달리 요동 주파수에 비례하지 않았으며, 교반조 내의 유동양상이 선회요동의 선회류와는 다른 좌우 물결류인 관계로 어떤 진동수에서 갑자기 액면이 크게 흔들리며 움직이는 양상을 보이며. 3 s-1 이상의 요동 주파수부터는 소요 동력이 선회요동 교반조보다 적어지는 등 요동 주파수가 소요 동력에 미치는 영향은 매우 복잡하였지만, 생성되는 회전류의 범위에서의 왕복 요동 교반조 소요 동력은 회전 요동 교반조에 대해 보고된 식으로 상관시킬 수 있었다. 왕복요동 교반조에서의 kLa (물질이동 용량계수) 역시 교반 소요 동력이 단순한 형태로 소비되지 않았기 때문에 주파수의 증가에 따라 선형으로 증가하는 선회요동 교반조의 kLa와는 달리 복잡한 형태로 증가하였다. 왕복요동 교반의 kLa가 선회요동 교반의 kLa 보다 컸으며, kLa 값이 커질수록 그 차이도 급격히 커졌다. 결과적으로 왕복 요동에서의 산소 전달 속도는 회전 요동보다 컸으며, 단위 부피당 소요 동력과 상관시킬 수 있었다.

Annular 유동층 반응기에서 최소유동화 속도 및 압력요동 특성 (Characteristics of Minimum Fluidization Velocity and Pressure Fluctuations in Annular Fluidized Beds)

  • 손성모;김욱영;신익상;강용;최명재
    • Korean Chemical Engineering Research
    • /
    • 제46권4호
    • /
    • pp.707-713
    • /
    • 2008
  • 직경이 0.102 m이고 높이가 2.0 m인 annular 유동층에서 최소유동화 속도 및 압력 요동 특성을 고찰하였다. 기체유속($U_G$), 고체 입자의 크기($d_p$) 그리고 유동층 온도가 최소유동화 속도 및 압력 요동 특성에 미치는 영향을 검토하였다. 본 연구 결과, annular 유동층 내의 압력 요동 자료로부터 구한 상관차원을 유동층 내부의 기체 및 유동 입자의 복합적인 거동을 정량적으로 나타내는 파라미터로 쓸 수 있었으며, 이 상관차원의 값은 기체의 유속, 유동 입자의 크기 그리고 반응기의 온도가 증가함에 따라 증가하였다. 유동층에서 유동입자의 최소유동화 속도를 유동층에서 압력 강하 및 압력 요동자료의 표준 편차를 사용하는 방법뿐만 아니라 압력 요동 자료의 상관차원을 이용하여서도 구할 수 있었으며 이들 각기 다른 방법으로 구한 최소 유동화 속도 값은 서로 매우 유사하였다. Annular 유동층에서 유동 입자의 최소유동화 속도는 유동 입자의 크기가 증가할수록 증가하였으나 유동층의 온도가 증가함에 따라 감소하였다. 본 연구의 범위내에서 annular 유동층에서 최소 유동화 속도를 압력 요동 자료의 상관 차원과 무차원군의 함수로 나타낼 수 있었다.

GPS/IMU를 이용한 SAR 영상의 요동 보상 기법에 대한 연구 (SAR Motion Compensation Using GPS/IMU)

  • 김동현;박상홍;김경태
    • 한국전자파학회논문지
    • /
    • 제22권1호
    • /
    • pp.16-23
    • /
    • 2011
  • 본 논문에서는 레이더 플랫폼의 요동에 의해서 흐려진 SAR(Synthetic Aperture Radar) 영상의 위상 오차를 보상하기 위하여 GPS(Global Positioning System)/IMU(Inertial Measurement Unit) 데이터를 이용한 요동 보상 기법을 소개한다. 실제 비행 궤적의 경우 대기의 왜란(turbulence)에 의한 항공기의 pitch, roll 및 yaw 운동에 의해 레이더의 플랫폼은 속도 변화가 생기고, 또한, 이상적인 궤적에서 벗어나게 된다. 이로 인한 along-track 속도 오차와 펄스간 위상 오차로 인해 SAR 영상은 흐려지게 된다. 요동 보상을 수행할 경우, 이러한 오차를 줄여서 영상의 품질을 개선할 수 있다. 시뮬레이션 결과, 레이더 플랫폼에 요동이 있을 경우 이 논문에서 소개한 요동 보상기법은 흐려진 SAR 영상의 품질을 개선하는데 효율적임을 알 수 있다.

기-고 유동층에서 Gaussian 분포 입자군의 표준편차에 따른 유출 특성 (The Characteristics of Elutriation with Gaussian Particle Size Distributions in a gas-solid fluidized bed)

  • 장현태;차왕석
    • 한국산학기술학회논문지
    • /
    • 제10권11호
    • /
    • pp.3274-3279
    • /
    • 2009
  • 기-고 유동층에서 다입자경 입자의 입자분포 변화에 따른 비산유출 특성을 연구하였다. 다입자경 입자분포는 Gaussian 분포를 사용하여 실험을 수행하였다. 최소유동화속도에 대한 유속비와 Gaussian 입자분포의 표준편차에 따른 비산유출상수를 구하였으며, 이때 조업시간에 따른 압력요동의 특성치를 구하였다. 측정된 유동층의 압력요동 특성치로부터 압력요동의 표준편차, 평균압력, Power spectrum density function, 주진동수 등을 계산하였다. 입자분포군에 따라서 유출입자의 입자분포 및 압력요동 특성치는 크게 영향을 받는 것으로 나타났으며 이러한 결과로부터 압력요동 특성치로부터 유출특성의 해석이 가능함을 알 수 있었다.

Gaussian 분포의 입자군의 표준편차에 따른 최소유동화속도 (The Minimum Fluidization Velocity of Gaussian Distribution Particle System According to Standard Deviation)

  • 장현태;박태성;차왕석
    • Korean Chemical Engineering Research
    • /
    • 제46권3호
    • /
    • pp.567-570
    • /
    • 2008
  • 내경 0.109 m의 유동층에서 다입자경 모래에 대한 압력요동의 표준편차와 유속간의 선형회귀분석을 이용한 최소유동화속도 측정법의 적용성을 조사하였다. 다입자경 모래를 평균입자크기가 같은 Gaussian 분포에서 입자분포의 표준편차에 따른 최소유동화속도를 측정하고, 측정치를 타 연구자들의 식과 비교 검토하였다. 압력요동의 표준편차 값 선형회귀분석법과 층내 압력강하로부터 구한 최소유동화속도를 구하였다. 최소유동화속도 결정에서 유속 범위는 혼합도가 낮은 유속범위와 free bubbling 영역 이상을 제외한 범위값 이어야 하며, 이 유속범위에서 측정위치는 혼합이 양호한 층 중앙이 가장 적절하다.

PIV를 이용한 바탕회전하에서 회전요동하는 직사각형 용기 내의 유동해석 (Study on Fluid Flow in a Rectangular Container Subjected to a Background Rotation with a Rotational Oscillation Using PIV System)

  • 서용권;최윤환;김성균;이두열
    • 대한기계학회논문집B
    • /
    • 제24권6호
    • /
    • pp.845-851
    • /
    • 2000
  • In this paper, we show the numerical and the experimental results of two-dimensional fluid motions inside a rectangular container subjected to a background rotation added by a rotational oscillation. In the PlY experiment we apply a new algorithm, new three step search(NTSS), to the velocity calculation. In the numerical computation, the linear Ekman-pumping model was used to take the bottom friction effect into account. It was found that it well produces the experimental results at low e number.

벽근방의 3각주에 의하여 교란받는 난류경계층에 관한 연구 (Study on the Turbulent Boundary Layer Disturbed by a Triangular Prism near the Wall)

  • 심우건;이강주;조용철
    • 설비공학논문집
    • /
    • 제3권3호
    • /
    • pp.161-167
    • /
    • 1991
  • This paper presents the results of some measurement of the fluctuating velocity field in the turbulent boundary layer disturbed by a triangular prism and discusses the discovery of the disturbed boundary layer. A prism of height 8mm was used for experiments. The streamwise location of the prism was fixed at 1200mm downstream from the leading edge and the space between the prism center and the wall was set at three different values, 6, 15 and 33.5mm. The results show that the near-wall region of the disturbed boundary layer recovers original state much more quickly than the outer region. In the case h=6mm the recovery is faster than the other cases. Moreover, it was found that peak of fluctuating velocities moves outwards somewhat rapidly with increasing ${\times}$ mainly due to the turbulent diffusion of the fluctuating velocity.

  • PDF

수학적 해석 방법에 의한 액체저장탱크의 액동압 거동 해석 (Hydrodynamic Behavior Analysis of Vertical-Cylindrical Liquid-Storge Tanks by Mathematically Analytic Method)

  • 박종률;오택열
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2001년도 춘계학술대회논문집A
    • /
    • pp.628-635
    • /
    • 2001
  • Hydrodynamic behavior and response of vertical-cylindrical liquid-storage tank is considered. The equation of the liquid motion is shown by Laplace's differential equation with the fluid velocity potential. The solution of the Laplace's differential equation of the liquid motion is expressed with the modified Bessel functions. Only rigid tank is studied. The effective masses and heights for the tank contents are presented for engineering design model.

  • PDF

요동형 쌍원통 유압펌프내의 유동장 해석에 관한 연구 (Investigation of new in the Oil-Hydraulic Pump Consisting of Swing Twin-Cylinder)

  • 심우건;김기선
    • 한국진공학회지
    • /
    • 제14권1호
    • /
    • pp.7-16
    • /
    • 2005
  • 두 개의 쌍원통 실린더를 구성하고 있는 기름-물 펌프는 차세대 저진공 펌프로의 활용이 가능하다. 하지만 설계개선을 위한 유동 해석 결과가 충분하지 않다. 경제적 측면에서 상업화 이전에 수치해석 방법에 의한 유동해석이 요구되고 있다. 유동 해석에 사용되는 상업용 코드(Fluent)을 사용하여 펌프의 설계에 필요한 자료를 제공하였다. 쌍원통 실린더와 고정 실린더 사이의 속도와 압력 분포 등의 유동변수를 분석하기 위하여 2차원 해석을 수행하였다. 본 수치해석 방법은 쌍원통 실린더로 구성된 펌프의 성능향상에 유용하게 사용할 수 있다.

회전요동하는 원통내의 유동특성 - 수치해석 및 실험 (Fluid Flow in a Circular Cylinder Subject to Circulatory Oscillation-Numerical Analysis and Experiment)

  • 서용권;박준관
    • 대한기계학회논문집B
    • /
    • 제20권12호
    • /
    • pp.3970-3979
    • /
    • 1996
  • A fluid flow inside a circular cylinder subject to horizontal, circular oscillation is analyzed numerically and experimentally. The steady streaming velocities at the edges of the boundary layers on the bottom and side surfaces of the cylinder obtained in the previous paper are used as the boundary conditions in the governing equations for the steady flow motion in the interior region. The Stokes' drift velocity obtained in the previous paper also constitutes the Lagrangian velocity which is used in the momentum equations. It turns out that the interior steady flow is composed of one cell, ascending at the center and descending near the side surface, at the streaming Reynolds number 2500. However, at the streaming Reynolds number 25, the flow field is divided into two cells resulting in a descending flow at the center. The experimentally visualized flow patterns at the bottom surface agree well with the analytical solutions. The visualization experiment also confirms the flow direction as well as the center position of the cell obtained by the numerical solutions.