• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.9
• /
• pp.873-877
• /
• 2013

The application of inkjet technology has been broadening from home printers to manufacturing tools. Recently, there have been demands for high-resolution printing, especially in the field of printed electronics applications. To improve upon the conventional inkjet printing patterning method, electrohydrodynamic (EHD) inkjet technology has recently attracted attention because droplets smaller than the nozzle diameter can be ejected and materials with wider viscosity range can be used for jetting. In this study, an EHD jet printing system for fine patterning is presented. To print various patterns based on drop on demand printing, vector and raster printing algorithm are implanted in the printing software. Fine conductive patterns with line width of less than $7{\mu}m$ can be easily achieved via EHD jet using a nozzle with inner diameter of $8{\mu}m$.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.9
• /
• pp.116-125
• /
• 2008

Inkjet printing technology with a drop-on-demand (DOD) inkget head technology has been recognized as one of versatile and low cost manufacturing tools in the electronics industry. Concerned with control of driving signal, however, general strategy to optimize jetting stability has not been understood well, because of the inherent complex multi-physics nature in inkjet phenomena. Motivated by this, present study investigates the effect of driving waveforms of piezoelectric head on jetting characteristics of DOD inkjet system focused on jetting stability with phase matching of pressure waves in the print head. The results show that velocities and volumes of the ink jetted droplets were linear relations with the driving signal's maximum voltage, while periodic behaviors are observed with the driving signal's pulse widths.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1444-1449
• /
• 2007

Inkjet printing technology with a drop-on-demand (DOD) inkjet head technology has been recognized as one of versatile and low cost manufacturing tools in the electronics industry. Concerned with control of driving signal, however, general strategy to optimize jetting stability has not been understood well, because of the inherent complex multi-physics nature in inkjet phenomena. Motivated by this, present study investigates the effect of driving waveforms of piezoelectric head on jetting characteristics of DOD inkjet system focused on jetting stability with phase matching of pressure waves in the print head. The results show that velocities and volumes of the ink jetted droplets were linear relations with the driving signal's maximum voltage, while periodic behaviors are observed with the driving signal's pulse widths.

• Journal of ILASS-Korea
• /
• v.15 no.4
• /
• pp.163-169
• /
• 2010

Jetting stability is the most important factors in inkjet printing because printing quality is totally determined by shape of the droplets on the substrate. In order to acquire stable jet, viscosity and dynamic behavior of the ink must be considered. In addition, waveform to drive the inkjet printhead is also to be controlled. In this study, the driving waveform composed of rising time, dwell time and falling time is optimized to obtain a stable jetting using drop watcher system. Also, effect of ink viscosity on jetting is experimentally investigated by changing the temperature of ink cartridge. As a result, jetted drop having uniform velocity is acquired.

• Journal of ILASS-Korea
• /
• v.17 no.1
• /
• pp.20-26
• /
• 2012

Inkjet printing is one of the direct writing technologies and is able to form a pattern onto substrate by dispensing droplets in desired position. Also, by inkjet technology manufacturing time and production costs can be reduced, and procedures can be more efficient. To form a metal pattern, it must be harmonized with conductive nano ink, printing process, sintering, and surface treatment. In this study, micro patterning of conductive line has been investigated using the piezoelectric printhead driven by a bipolar voltage signal is used to dispense $20-40{\mu}m$ diameter droplets and silver nano ink which consists of 50 nm silver particles. In addition, hydrophobic treatment of surface, overlap printing techniques, and sintering conditions with changing temperature and times to achieve higher conductivity.

• Journal of Veterinary Clinics
• /
• v.16 no.1
• /
• pp.95-99
• /
• 1999

돼지 심장의 해부학적 구조에 대해서는 많은 연구가 보고되어 있으나 흉골 정중선 절개와 방정중선 절개 후 절개선에 나타나는 돼지 심장 대혈관들의 외과적 해부구조에 대한 보고는 아직 없고 심장적출 및 수술에 외과적 해부구조의 숙지가 필수적이므로, 체중 15kg - 25kg의 돼지 12마리를 4마리씩 3군, 즉 정중선절개군, 우측방정중선절개군, 좌측방정중선절개군으로 나누어 흉골열개 후 나타난 심장 대혈관들의 육안적 외과구조를 보고하고 심장적출술을 시도해 각 수술절개 접근법에 따른 수술의 용이성을 관찰하여 더 나은 수술접근법을 선택하는데 필요한 정보를 제공하고자 본 실험을 실시하였다. 그 결과, 우측과 좌측 방정중선절개법에 의해 흉골을 완전 열개시에는 제 1흉골과 갑상연골 부위에서 정중선으로 접근하는 초승달형 절개를 통해 internal mammary artery의 절개 위험성을 피할 수 있음을 발견하였고 흉골정중선절개에서는 상행대동맥의 정 중앙부에 aortic cannula를 쉽게 장착할 수 있었고 특히 비숙련자에게 더 적절한 수술 방법임을 알 수 있었다. 한편 숙련자가 심장적출이 아닌 동맥관개존증등과 같은 심장수술의 경우에는 방 정중선절개로써 환축의 수술 후 통증을 감소시키고 조기치유가 가능하다면, 초승달형 절개법을 응용한 방정중선 절개를 권할 수 있고 이에 따른 임상적 관찰이 요구되는 바이다.

• Clean Technology
• /
• v.20 no.2
• /
• pp.97-102
• /
• 2014

Currently various studies are underway for dispensing high-viscosity phosphor. These studies have reported limitations and challenges in the dispensing process. The discharged amount of phosphor was approximately the same each time which is important for the implementation of high-efficiency white LED technology. This paper present high-viscosity phosphor dispensing process for white LED implementation by using electrostatic printing technology. The voltage controlled DOD (Drop-On-Demand) discharge experiment was studied to determine angle of drop meniscus at nozzle and dot diameter. With increase in Discharge voltage, the discharge angle of meniscus increased while dot diameter decreased. Therefore it can be concluded that we can control the discharge rate by controling the discharge angle of meniscus.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.4
• /
• pp.379-384
• /
• 2015

Electrospinning has recently been used for micropatterning. The electrospinning method as a patterning tool has the advantage of a rapid patterning speed because it is based on a continuous printing mode rather than a drop-on-demand mode. To obtain stable continuous printing, a high molecular weight polymer must be mixed with functional materials for patterning. In this paper, polyethylene oxide (PEO) was used. The effect of polymer on viscosity and formation of a Taylor cone jet from the electrospinning nozzle was investigated. Finally, the electrospinning patterning results of a silver paste ink on a glass substrate were investigated.

• The Korean Journal of Pharmacology
• /
• v.28 no.2
• /
• pp.147-162
• /
• 1992

The objectives of the present experiments were to characterize the effects of the peptides belonging to the pancreatic polypeptide family on the contractility of cerebral arteries and to observe the interactions of these peptides with the cyclic nucleotide activators and the potassium channel openers. Dogs of either sex, $20{\sim}30\;Kg$ in weight, were sacrificed. Basilar and middle cerebral arteries from brain were isolated and prepared for myography in the PSS equilibrated with 95% $O_2$ and 5% $CO_2$ at $37^{\circ}C$. The endothelial cells of the spiral strips were removed by CHAPS solution (0.3% w/v, 15 seconds). 1. PP, PYY and NPY contracted the arterial strips concentration-dependently with a rank order of potency of PYY>NPY>PP. These peptides were 20 to 200 times more potent than norepinephrine, and only PYY showed a greater potency than 5-HT. 2. Cyclic nucleotide activators, forskolin (for cAMP) and sodium nitroprusside (for cGMP) reduced the basal tone and inhibited the PP-, PYY- and NPY- induced contractions by concentration-dependent manners. Forskolin was more potent in reducing basal tone than sodium nitroprusside. 3. Potassium channel openers, RP 49356, P 1060 and BRL 38227 reduced the basal tone concentration-dependently and tended to inhibit the PP-, PYY- and NPY- induced contractions. Notably, BRL 38227 with low concentration $(0.1\;{\mu}M)$ enhanced the contractions induced by those peptides while P 1060 inhibited the contractions concentration-dependently. 4. The combinations of the cyclic nucleotide activators and the potassium channel openers were slightly additive in reducing the basal tone. P 1060 and BRL 38227 enhanced the relaxant effect of sodium nitroprusside significantly. On the PYY-induced contration $(0.1\;{\mu}M)$, $K^+$ channel openers tended to inhibit the inhibitory actions of forskolin and sodium nitroprusside. P 1060 and BRL 38227 antagonized the inhibitory action of sodium nitroprusside significantly. The results of the present study may be summarized that in canine cerebral arteries, not only NPY but also PYY may play a role in a cerebrovascular spasm, and intracellular concentration of either cAMP or cGMP may be involved in the mechanism of vasoconstrictive actions of these peptides, which may be affected either positively or negatively by a $K^+$ channel opener.

• Childhood Kidney Diseases
• /
• v.4 no.1
• /
• pp.63-68
• /
• 2000

Purpose: MCDK is regarded as a common cause of abdominal masses in children. And the presentation of the MCDK is usually a unilateral flank mass in the a newborn. Bialteral disease results in either fetal demise or necessity fer renal replacement therapy at birth. This study is designed to assess the clinical features and natural history of the unilateral multicystic dysplastic kidney. Patients and Methods: From January 1987 to January 2000 data were obtained retrospectively on 57 patients (28 boys and 29 girls, age ranged 1day-11years) who had a diagnosis of multicystic dysplastic kidney. The diagnosis of multicystic dysplastic kidney was confirmed by a combination of ultrasonography and radionuclide scan. Voiding cystourethrogram study in 31 patients were done to determine the condition of the contalateral kidney. Restllts: $84\%$ of the patients were diagnosed before birth by antenatal ultrasonography Clinical manifestations of children with postnatal diagnoses were palpable abdominal mass($3.5\%$), abdominal distension($17\%$), and incidental($10.5\%$). The abnormalities in contralateral kidney were hydronephrosis($21\%$), compensatory hypertrophy($12\%$), simple cyst($2\%$), bifid pelvis($2\%$). Surgical management was performed in 20 patients($35\%$) due to recurrent infection, for diagnostic purpose to differentiate from malignancy and abdominal distention. Follow-up in the remaining 37 patients continued (mean 18 months) and results of sonogram findings were involution change in 23 patients($40\%$) and no interval changes in 13 patient($23\%$). Conclusions : The apparent tendency to regression of the dysplastic kidney and no difference in the number of complications justify a conservative management rather than operative intervention except in associated severe complications such as urinary tract infection or rupture of cysts.