• The Journal of the Korea Contents Association
• /
• v.9 no.12
• /
• pp.364-375
• /
• 2009

The purpose of this study is to offer basic data for the fall prevention by analyzing the kinematic difference between the lower limb joints and the lower extremities in elderly people's walking given the lower-limb resistance exercises. For this, three-dimensional image analysis was carried out by selecting 7 elderly women from over 70s to under 80 years old. To obtain the three-dimensional location coordinates in the lower limb joints and the lower extremities, it shot with 100Hz/s by using MCU(Qualisys, Sweden) camera. The shot image gained raw data on the location coordinates by using QTM(Qualisys, Sweden). As a result of calculating three-dimensional angle by using program of Matlab 6.5, the following conclusions were obtained. Flexion and extension in the thigh and the lower-leg extremities were indicated to be big in motion of flexion after exercising at E5. Foot segment indicated statistical difference while showing eversion at E4. Knee joints showed flexion at E4 after exercising. Ankle joints showed statistical difference while indicating motion in inversion at E3 and in eversion at E4(p<.05).

• The Journal of Korean Physical Therapy
• /
• v.24 no.5
• /
• pp.334-339
• /
• 2012

Purpose: This study was conducted in order to compare the ability to control postural sway during perturbation when stroke patients received postural sway induced by head rotation. Methods: This study included 15 stroke patients and 15 healthy adults. Each group was measured by 3D motion analysis for determination of the angle of the neck in static position and by balance performance monitor for estimation of swaying angle in both neutral posture and head rotation position. These results were then analyzed in order to compare the healthy control group and the stroke patients group. Results: In both static posture ($60.7{\pm}4.81$) and dynamic posture ($51.46{\pm}6.87$, $70.8{\pm}6.55$), significant decreases were observed in the angle of head rotation of the patient group, compared to the healthy group (p<0.05), and significant decreases were observed in the sway angle of the patient group when in the neutral position ($3.62{\pm}7$, $24{\pm}0.60$) and head rotation ($3.04{\pm}0.80$, $51.46{\pm}6.87$), compared to the healthy group (p<0.05). Conclusion: According to these findings, patients with stroke tend to restrict the ROM of head rotation and swaying angle in dynamic posture and maintain their posture instability using limitation of head movement relative to the trunk and sway angle of area which is larger than that of affected side in unaffected side.

• Clinics in Shoulder and Elbow
• /
• v.10 no.1
• /
• pp.146-149
• /
• 2007

Congenital undescended scapula is congenital structural abnormality which affects only one side usually. Scapula located higher than the usual and rotating deformity that inferior angle to medial side, superior angle to lateral side is common. This report presents one case of the surgical therapy of a sprengel deformity patient who passed an optimal operation period with age $3{\sim}7$years old, and includes brief review of the literature. 7 years old boy whose chief complaint was the limitation of left scapular-thoracic movement and he had an omovertebral bone bridge and periscapular muscle atrophy. There was improvement of motion ranges and cosmetic problems after surgical treatment.

• Journal of Korean Society of Steel Construction
• /
• v.22 no.4
• /
• pp.355-363
• /
• 2010

The objective of this study is to examine the structural performance on the Rectangular Steel Tube Column-to-H Beam connections using one-side bolts and T-stub. Although a rectangular steel tube comparing with a H-shaped steel has many advantages and is more efficient, its application is limited due to the lack of experiences and connection details. Existing steel moment connections using the rectangular steel tube are mainly using through plate diaphragms. Its processing of construction is so complicated that it is hard to apply in the field. In this study, the structural performance and the earthquake capacity for T-stub connection with one-side bolts were investigated. And it is performed a comparative analysis of strength, rigidity, total rotation and energy absorption capacity for the various connection details.

• Journal of the Korea Convergence Society
• /
• v.9 no.10
• /
• pp.423-432
• /
• 2018

The purpose of this study was to investigate the differences in upper and lower strengths and symmetry between upper body injury group, lower body injury group and non-injury group of bowling athletes. The subjects were the upper body injury group (UG), n = 16, the low body injury group (LG), n = 8, the non injury group, [NG], n = 15). The isometric strength of the bowler was measured using Manual Muscle Tester 01165 (Lafayette Instrument Company, USA) and the symmetry index (SI) was calculated. The results were as follow. The symmetry index of hip extension strength and hip external rotation strength was statistically larger in NG than LG (p <.05). The above results suggest that lower body strength and bilateral symmetry was closely related to injuries of the lower body. In order to prevent injury of the bowler, strengthening of lower body strength and symmetrical training are needed.

• Journal of the Korean Society of Physical Medicine
• /
• v.13 no.2
• /
• pp.33-41
• /
• 2018

PURPOSE: Femur and tibia alignment in the knee joint is important to the biomechanics of lower limb movement. The purpose of this study was to compare vastus medialis oblique (VMO) and vastus lateralis electromyographic muscle activities according to tibial rotation taping methods. METHODS: Twenty-nine healthy subjects (13 males and 16 females) in the 20s, without knee joint-related diseases or disorders, participated in our study. After identifying each subject's dominant foot, the maximal voluntary isometric contraction (MVIC) was determined using a manual muscle tester. The activity of each target muscle was measured at 50% MVIC in isometric muscle contraction and at a $30^{\circ}$ knee flexion position before and after applying internal and external rotation taping by the Mulligan concept and in the neutral position. Non-elastic tape was used to stabilize the tibia rotation position. RESULTS: In the males, VMO muscle activity was significantly increased in the tibia internal rotation position ($47.2{\pm}14.6$, $mean{\pm}SD$) than in the neutral position ($39.3{\pm}14.9$) (p<.05). CONCLUSION: The results of this study indicate that when applying tibia internal rotation taping in healthy males, VMO muscle activity significantly increases during isometric extension of the knee. Therefore, this study provides a basis for selecting the appropriate taping method, in consideration of the available treatments in clinical practice for patients with knee problems.

• Applied Microscopy
• /
• v.41 no.2
• /
• pp.117-122
• /
• 2011

Sperm morphology of Pipistrellus savii velox was examined by transmission electron microscope. The sperm head of P. savii velox was bullet in shape. The sperm head was 3.1 ${\mu}m$ in length, whose posterior 3.0 ${\mu}m$ was occupied by a nucleus with 1.8 ${\mu}m$ in width. The segmented columns were about 14~15 in number. The total number of mitochondrial gyres was 57. Number of 1, 5, and 6 of the outer dense fibers were larger than the others. A fibrous sheath and longitudinal column of the principal piece were evidence, but the fibrous sheath was not seen at the end piece. In the present study, the length of the sperm head of P. savii velox were very shorter than those of other bats.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.6 no.4
• /
• pp.31-37
• /
• 2002

Recently a simplified design procedure as well as load transfer model for seismic steel moment connections with welded straight haunch have been proposed by Lee and Uang. Cyclic seismic testing was conducted to verify the proposed design procedure and to develop the details that will prevent the cracking at the haunch tip, where stress concentration was the highest. All the specimens thus designed effectively pushed plastic hinging away from the haunch tip and were able to develop satisfactory plastic rotation capacity of 0.04 radian with no fracture. A sloped edge combined with drilling a hole near the haunch tip or a pair of stiffeners(partially or fully) extended from the beam web successfully prevented the crack initiation at the haunch tip. The strut action of the haunch web, which had been predicted from the previous analytical study, was also experimentally identified through the strain gage readings.

• Journal of Wetlands Research
• /
• v.21 no.3
• /
• pp.207-214
• /
• 2019

This study investigated the flow characteristics in an annular flume with a free water surface using the Acoustic Doppler Velocimeter(ADV) in the laboratory. The flow was driven by the rotation of the inner cylinder in a way designed not to interfere with flocculation of cohesive sediments. The effect of the inner cylinder for the longitudinal velocities showed highest near the moving boundary and decreased towards the outer wall. At the lower longitudinal velocity, there was a peak in turbulent kinetic energy near the bed, whereas it moved upward to with increasing of the velocity. The longitudinal velocities estimated using the power law were in good agreement with the measured values than the values predicted by the log-law with roughness lengths. The average friction velocities evaluated by Reynolds shear stress were smaller than the values calculated using the log-law and power law when increasing the longitudinal velocity.

• Korean Journal of Applied Biomechanics
• /
• v.12 no.2
• /
• pp.295-306
• /
• 2002

The purpose of this study was analysis inter relative the ball velocity and isotonic torque of shoulder joint. The subject were twelve overthrow pitcher of professional baseball player. The measurement was used Cybex 6000. The results of this study were as follows : 1. As the siting position of maximal adduction torque of dominant, A group was higher than B group. As the non-dominant, B group was higher than A group for improved angular velocity. There is no significance difference between group. 2. As the siting position of maximal abduction torque of dominant and non-dominant, B group was higher than A group for all measurement. There is no significance difference between group. 3. As the layed position of maximal internal torque of dominant, A group was higher than B group. As the non-dominant was just higher at $180_{\circ}$/sec than B group, B group was higher at $60_{\circ}$/sec and $300_{\circ}$/sec than A group. There is no significance difference between group. 4. As the layed position of maximal external torque of dominant and non-dominant, A group was more higher than B group for all measurement. There is no significance difference between group. 5. As the standing position of maximal internal torque of dominant, A group was just higher at $60_{\circ}$/sec than B group, B group was higher at $180_{\circ}$/sec and $300_{\circ}$/sec than A group. As the non-dominant, B group was higher than A group. There is no significance difference between group. 6. As the standing position of maximal external torque of dominant, A group was higher $60_{\circ}$/sec and $180_{\circ}$/sec than B group. But B group was higher $300_{\circ}$/sec than A group. As the non-dominant, B group was higher than A group. There is no significance difference between group.