Journal of the Korean Society of Manufacturing Process Engineers
/
v.16
no.4
/
pp.38-45
/
2017
A finite element analysis-based approach which investigates the causes of the breakdown in the outer ring of the choke at hot rod rolling mill is presented. Two-dimensional drawings of the whole vertical-type mill stand are transformed into three-dimensional CAD models. Non-linear elasto-plastic deformation analysis of material at the roll gap is performed for computing roll force and torque of the work roll. Then, the reaction forces of the bearing rings together with a set of roller bearings that support the work roll are obtained by means of rigid body motion analysis. Finally, stress behaviors in the bearing rings together with a set of roller bearings that support the work roll are investigated by linear elastic analysis. Results reveal that stress at the contact area between the outer ring and roller bearing is extraordinary high when an internal gap between an external surface of the outer ring and the internal surface of the chock due to wear of the inside of the chock occurs.
본 연구의 목적은 사이클 운동 시, 3가지 다른 길이의 페달 샤프트 (표준형, 5.08 cm, 10.16 cm)가 근육활동에 미치는 영향을 근전도 측정을 통해 비교 분석하는데 있다. 사이클링을 활동적으로 하는 여학생 5명을 피험자로 선택하여 대퇴지근(RF), 외측광근(VL), 내측광근(VM) 대퇴이두근(BF)을 표면전극을 사용하여 관찰하였다. 자료 분석을 위해 두 대의 S-VHS 카메라 (Panasonic Digital 5000)를 사용하여 사이클링 동작을 촬영하였다. 연구의 목적을 위해 각 조건에 대한 표준화된 평균 및 최대 근전도치가 계산되어졌다. 각각의 변인에 대해 페달 샤프트의 길이에 따른 근전도치의 차이점을 분석하기 위해 반복측정에 의한 일원변량분석을 사용하였으며, 통계적 유의성이 있을 경우 Newman-Keuls 사후검증을 실시하였다. 일반적으로 5.08 cm 길이의 페달 샤프트를 사용했을 경우 표준형의 페달 샤프트와는 다르게 모든 하지근의 적분 근전도치가 줄어드는 것으로 나타났다. 페달 샤프트의 길이가 길어짐에 따라 외측광근의 적분 근전도치가 통계적으로 유의하게 낮게 나타났고, 5.08 cm 길이에서 대퇴이두근의 적분 근전도치가 통계적으로 유의하게 낮게 나타났다. 페달 샤프트 길이에 따른 최대 근전도치의 통계적 유의성을 찾을 수 없었지만, 일반적으로 5.08 cm 길이의 페달 샤프트를 사용할 때 최대 근전도치가 가장 낮게 나타났다. 본 연구의 결과, 페달 샤프트의 길이가 하지근의 활동정도와 형태를 변화시킨다는 것을 알 수 있었으며, 하지관절의 부하에 영향을 미치는 것으로 사료되어진다. 이에 따라, 개인의 해부 구조학적인 면을 고려한 페달 샤프트의 길이 조절은 효율적이며 안정적인 사이클링 동작을 수행하는데 많은 도움이 될 수 있을 것이다.
Journal of Advanced Marine Engineering and Technology
/
v.40
no.3
/
pp.152-156
/
2016
Wastewater heat recovery heat pump systems use heated wastewater from public baths or factories as the heat pump's heat source. Generally, this system uses a bare tube evaporator. In the heat transfer process from wastewater to refrigerant, thermal resistance is caused primarily by fouling deposits on the outside surface of tube. Fouling directly increases thermal resistance and decreases heat pump efficiency. Thus, it is desirable to eliminate fouling. In this study, we fabricated a fouling mitigation device using a bubbling fluidized bed with cleaning sponge balls in the wastewater bath. Experimental conditions were as follows: $20^{\circ}C$ cold-water temperature, $40^{\circ}C$ wastewater temperature, 100 L/h cold water flow rate, and $0.161m^2$ heat exchanger surface area. Experimental results showed that the thermal resistance of fouling decreased by 56% with the fluidized bed alone and by 86% with both the fluidized bed and cleaning sponge balls.
Journal of The Geomorphological Association of Korea
/
v.21
no.4
/
pp.41-52
/
2014
Coastal dune, as one part of beach system, contributes for beach recovery as well as preventing beach erosion by exchanging sands between beach and dune. Due to high tidal range, the boundary of sand dunes on the west coast of Korean Peninsula is outside the high water line during spring tide and erosion also occurs in high waves during spring high tide. This paper investigates the erosion status of the dunes located in the JangHang beach by analyzing images from camera monitoring system, and tide and wave data observed adjacent to the study site during the passage of 4 typhoons in 2012. It also studies the benefits of camera monitoring images in investigating the dune erosion and analyzing coastal topographic changes.
The Journal of Korean Institute of Communications and Information Sciences
/
v.17
no.1
/
pp.80-89
/
1992
This paper presents algorithms which are region labeling and data structure of a boundary segmentation as image intermediate description process. In the method, the algorithms are region labeling, boundary segmentation, line and curve fitting and extracting data structure of each segment. As a result, a data structure of image is described by a set of region number, segment number, line or curve, starting point and end point of each segment and coefficient of line or curve. These data structures would serve for higher level processing as object recognition. For example we will use this data structure to solve the correspondence problem of stereoscopic image information. And we verified these algorithms through the image reconstruction of data structure.
Proceedings of the Korean Institute of Surface Engineering Conference
/
2017.05a
/
pp.71-71
/
2017
플라즈마를 이용하는 건식 식각 또는 박막 증착 장비(PECVD)의 경우 웨이퍼에 rf bias를 인가하여 이온의 에너지와 입사각을 조절한다. 종래에는 웨이퍼의 가장 자리 3 mm영역을 공정 대상에서 제외하는 exclusion area로 지정하였으나 점차 공정 기술의 발달로 2 mm 이내로 감소하고 있다. 따라서 웨이퍼의 가장 자리에서 발생하는 전기장의 방향 및 크기 변화를 조절할 수 있는 기술의 개발이 필요하게 되었으며 그중 핵심적인 부품이 Si 또는 SiC로 제작되는 edge ring이다. Focus ring이라고도 불리는 이 부품은 웨이퍼 상에서 반경 방향으로 흐르는 가스의 유속이 가장 자리에 근접하면 빨라지는 현상과 이에 의해 식각/증착 화학 반응 속도가 증가하는 문제를 완화하기 위한 것과 적절한 전기 전도도를 부여함으로써 가장 자리의 전기장 분포를 최적화 할 수 있는 새로운 설계 변수로 활용할 수 있다. 스퍼터링의 경우에도 웨이퍼 중앙과 주변 부는 마그네트론 음극의 회전 링과의 입체각이 차이가 나므로 가장 자리의 경우 트렌치나 홀의 내측이 외측에 비해서 증착막의 두께가 얇아지는 문제가 있으며 건식 식각의 경우 홀의 형상이 수직에서 벗어나는 경향이 발생할 수 있다. 또한 사용 시간에 비례해서 edge ring의 형상이 변화하는데 상대적으로 고가품이어서 교체 주기를 설정하는 보다 합리적 기준이 필요하다. 본 연구에서는 전산 유체 역학 모델을 사용하는 ESI사의 CFD-ACE+를 활용하여 edge ring의 형상과 재질이 갖는 영향을 전산 모사하기 위한 기초 작업을 그림 1과 같이 진행하였다. 2D-CCP model에 Ar 가스를 가정하고 비유 전율 10내외 전도도 $0.1/Ohm{\cdot}m$정도의 재질에 대한 용량성 결합 플라즈마에 대해서 계산을 하고 이 때 기판에 인가되는 고주파 전력에 의한 이온의 입사 에너지 분포 및 각도 분포를 Monte Carlo 방법으로 처리하여 계산하였다.
This study conducted to investigate the temporal and spatial variations in the fish community structure in the Seomjin River estuary (ES1~ES3) and Gwangyang Bay (ES4~ES8). Surveys were conducted at eight points between May and September from 2020 to 2021. A total of 5,111 fish were collected, representing 42 families, 68 genera, and 78 species. The dominant species collected during the survey period were Pennahia argentata, with 2,370 individuals and a relative abundance of 46.4%. Also, as a subdominant species, Nuchequula nuchalis, 1643 individuals were caught, accounting for 32.1% relative abundance. According to Bray-Curtis similarities, observations were divided into three groups based on the fish community composition, and they were further categorized into brackish water areas, coastal areas, inner areas, and outer areas. Group 1 mainly consisted of fish inhabiting freshwater and brackish water areas, while group 3 exclusively contained fish living in marine waters. ANOSIM (Analysis of Similarity) analysis revealed a significant difference (ANOSIM R=0.783, p=0.001) between Group 2 and Group 3, and the species contributing to these clusters were P. argentata and Muraenesox cinereus. The study demonstrated spatial changes in the fish community structure from the Seomjin River estuary to the outer coast. The findings highlight the importance of long-term monitoring of major species that exhibit spatial variations, serving as essential foundational data for the conservation and management of economically significant fish species.
Soil nailing is the most general method to reinforce the slope by taking pullout and shear resistance force of the nail for stabilizing the slope. Domestic soil nailing design method considers only pullout resistance and does not consider the shear resistance sufficiently. In case of nail, the effect of tensile stress is dominant, but it is desirable to design by considering shear stress as well as tensile stress in case of slope where circle failures occur. Recently, studies on the shear resistance effect of nails have been carried out in the geotechnical field. However, many researches on the shear reinforcement effect of soil nailing have not been conducted until now. Most of the studies are about increasing pullout resistance by improving material, shape and construction method of nail. Therefore, it is necessary to the study on shear resistance of soil nailing and development of new methods to increase the shear force. In this study, large shear test and limit equilibrium analysis have been performed for a new soil nailing method to increase the shear resistance by forming protrusions through pressurized grouting after installing a packer on the outside of deformed bar. The study results showed that shear resistance of protrusion type soil nailing increased compared to soil nailing and it is more effective when applied to the ground with large strength parameters.
Journal of the Korea Academia-Industrial cooperation Society
/
v.14
no.8
/
pp.3650-3655
/
2013
A state purpose to produce fine blanking die gets to be the maximum size of share surface the study considered that change a size of share area. the clearance affecting most greatly size of share surface fixing as 1% of material thickness and while change share speed, A distance change from share line to V-ring center, A change of V-ring angle. it designed. Each test specimen taken from the share surface size analysis of the V-ring distance of 2mm, the outer $45^{\circ}$ / inner$30^{\circ}$ if the, Shear speed was found that the area of the entire cross section is largest the 6.4m/min.
Proceedings of the Korea Water Resources Association Conference
/
2016.05a
/
pp.63-63
/
2016
자연 하천은 연속적인 곡선 흐름을 가지고 있으며, 하천의 흐름을 해석하는 것은 복잡하고 어려운 일이다. 게다가 자연하천에서는 유사이송에 의해 하상변동이 발생하며 이를 정확하게 예측하는 것은 공학적 문제 해결에 중요한 역할을 한다. 곡선 흐름에서의 하상변동양상은 원심력에 의한 이차류로 인하여 유사가 하천의 내측으로 이동하게 되고, 하천의 외측에는 침식, 내측에는 퇴적이 된다. 이와 같은 현상은 원심력뿐만이 아니라 하천의 곡선에 의해 발생하게 되는 박리 또한 중요한 원인으로 이야기 되고 있으며, 선행 연구자들에 의해서 박리의 영향이 작지 않음을 알 수 있다. 자연하천에서의 정확한 하상변동을 예측하기 위해서는 원심력에 의한 이차류와 박리의 현상을 정확히 모의할 수 있어야하며, 이를 위해 3차원 모형이 필요하다. 따라서 본 연구에서는 3차원 unsteady RANS 모형을 이용하여 곡선수로에서 박리가 발생하는 현상을 모의하고자 한다. 곡선수로를 모의하기 위해서 곡선좌표계를 사용하였으며, 난류모형으로는 standard $k-{\varepsilon}$과 $k-{\omega}$ SST을 사용하였다. 또한 fractional step method를 이용하여 유속과 압력 커플링을 하였다. 그 결과 곡선수로의 흐름모의에서 레이놀즈 수가 큰 경우 박리가 발생하는 것을 확인하였으며, 두 난류모형 모두 곡선 흐름에서의 박리 현상을 모의할 수 있었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.