• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.5
• /
• pp.585-597
• /
• 2009

This research aims to develop a registration method to remove the geometric inconsistency between aerial images and LIDAR data acquired from an airborne multi-sensor system. The proposed method mainly includes registration primitives extraction, correspondence establishment, and EOP(Exterior Orientation Parameters) adjustment. As the registration primitives, we extracts planar patches and intersection edges from the LIDAR data and object points and linking edges from the aerial images. The extracted primitives are then categorized into horizontal and vertical ones; and their correspondences are established. These correspondent pairs are incorporated as stochastic constraints into the bundle block adjustment, which finally precisely adjusts the exterior orientation parameters of the images. According to the experimental results from the application of the proposed method to real data, we found that the attitude parameters of EOPs were meaningfully adjusted and the geometric inconsistency of the primitives used for the adjustment is reduced from 2 m to 2 cm before and after the registration. Hence, the results of this research can contribute to data fusion for the high quality 3D spatial information.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.4
• /
• pp.305-315
• /
• 2020

The purpose of this study is to compare algorithms of single photo resection, which determines the exterior orientation parameters used in fields such as photogrammetry, computer vision, robotics, etc. To this end, the algorithms were compared by generating experimental data by simulating terrain based on a camera used in aerial and close-range photogrammetry. Through experiments on aerial photographic camera that was taken almost vertically, it was possible to determine the exterior orientation parameters using three ground control points, but the Procrustes algorithm was sensitive to the configuration of the ground control points. Even in experiments with a close-range amateur camera where the attitude angles of the camera change significantly, the algorithm was sensitive to the configuration of the ground control points, and the other algorithms required at least six ground control points. Through experiments with two types of cameras, it was found that cosine lawbased spatial resection shows performance similar to that of a traditional photogrammetry algorithm because the number of iterations is short and no explicit initial values are required.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.2
• /
• pp.137-145
• /
• 2005

In this paper, we investigate the accuracy of various sensor models developed for linear pushbroom satellite images. We define the accuracy of a sensor model in two aspects: the accuracy of bundle adjustments and the accuracy of estimating exterior orientation parameters. The first accuracy has been analyzed and reported frequently whereas the second accuracy has somewhat been neglected. We argue that the second accuracy is as important as the first one. The second accuracy describes a model's ability to predict satellite orbit and attitude, which has many direct and indirect applications. Analysis was carried out on the traditional collinearity-based sensor models and orbit-based sensor models. Collinearity-based models were originally developed for aerial photos and modified for linear pushbroom-type satellite images. Orbit-based models have been used within satellite communities for satellite control and orbit determination. Models were tested with two Kompsat-1 EOC scenes and GPS-driven control points. Test results showed that orbit-based models produced better estimation of exterior orientation parameters while maintained comparable accuracy on bundle adjustments.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.6D
• /
• pp.771-779
• /
• 2009

Digital topographical maps used for GIS DB are mainly produced by the traditional way of analogue aerial photogrammetry. Therefore, analogue photos are only available for digital mapping after preprocessing such as film developing, printing and scanning. However, digital aerial camera is able to get digital image directly without preprocessing and thus the performance and efficiency of photogrammetry are extremely increased. This study aims to investigate geometric stability of digital aerial frame camera DMC (Digital Modular Camera). In order to verify the geometric stability of digital aerial camera DMC, some different block conditions with and without cross strips, GPS/INS data and variation of GCPs are introduced in the block adjustment. The accuracy results of every block condition were compared each other by computation of residuals of exterior orientation (EO) parameters. Results of study shows that the geometric stability of the block adjustment with cross strips is increased about 30% against without cross strips. The accuracy of EO parameters of block adjustment with cross strips is also increased about 2cm for X-coordinate, 3cm for Y-coordinate, 3cm for Z-coordinate, and 6" for omega, 4" for phi and 3" for kappa.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.11a
• /
• pp.263-268
• /
• 2004

GPS/INS에 의한 항공사진측량을 이용하려면 사진촬영과 동시에 획득한 외부표정요소의 결과를 도화ㆍ편집 작업에 실제로 적용해 보아야 한다. 도화성과의 검증작업은 GPS/INS의 결과를 이용하여 수치지도의 제작시 가장 중요한 공정에 해당한다. 이를 위하여 기존 AT성과에 의하여 제작된 해석도화원도를 기준으로 본 연구에서 제시한 AT 성과별, 도화기별, 표정방식별로 수행한 도화결과를 비교하였다. AT 성과와 표정방법에 상관없이 해석도화와 수치도화의 평면과 표고의 오차를 비교하여 보면, 해석도화가 수치도화보다 우수한 결과를 보여주며, 또한 평면오차가 표고오차보다 더 크게 나타남을 알 수 있었다. GPS/INS AT의 Direct 표정의 경우 InDirect 표정방법에 비해 3배 이상의 오차가 발생하였으나 모든 경우의 결과가 허용오차를 충족하고 있으므로 축척 1:5000에서는 GPS/INS AT를 이용한 표정과 도화작업은 매우 효율적으로 수행될 수 있음을 알 수 있었다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.5
• /
• pp.495-501
• /
• 2016

This study applied close-range digital photogrammetry to measure deformation of reinforced-soil wall as the passed time. We proposed to utilize the photogrammetric-board to determine 3D coordinates and compute exterior orientation parameters from the images without measuring control points. The displacements by the proposed method are compared with those of the Total-station. As results, measuring errors was within 5cm, and the deformation was not occurred in the 3 months. The proposed method using the photogrammetric-board therefore can be utilized to measure deformation of the reinforced-soil wall.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.22 no.1
• /
• pp.53-62
• /
• 2004

This paper deals with a new approach to acquire the exterior orientation parameters based on GPS(Global Positioning System) in combination with IMU(Inertial Measuring Unit), which enables us to achieve the same accuracy with minimal ground control points comparing to the conventional photogrammetric method. To prove the possibility of practical use of GPS/INS photogrammetry, a survey flight was conducted loading with all necessary photographing systems. The observed data set by GPS/IMU were analyzed and verified :he accuracy performance of kinematic GPS, and also compared to those of conventional photogrammetry in various points of view.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.11 no.2
• /
• pp.69-77
• /
• 1993

Investigation is given to the detailed procedure of a computer assisted automatic correction for scanning errors of the digital images of close-range photographs scanned by the CCD camera scanner. After determination of the exterior orientation parameters, photo coordinates of the all pixels were calculated using collinearity equation. For the generation of geometric corrected image from the photo coordinates of the all pixels, inverse-weighted-distance average method was used. And the accuracy of the resulting new image was checked comparing its image coordinates with there corresponding ground coordinates for the check points.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2003.04a
• /
• pp.531-536
• /
• 2003

In this paper, a camera modeling method that utilizes ephemeris data and imaging geometry is presented. The proposed method constructs a mathematical model only with parameters that are contained in the leader file and does not require any ground control points for model construction. Control points are only needed to eliminate geolocation error of the model that is originated from errors in the parameters that are used in model construction. With few (one or two) of control points, RMS error of less than pixel size can be obtained and control points are not necessarily uniformly distributed over the entire scene. This advantage is crucial in large project and will enable to reduce project cost dramatically.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.7 no.4
• /
• pp.125-132
• /
• 1987

The bundle adjustment used in photogrammetric data reduction is based on the collinearity condition. Photogrammetry has been used in many non-topographic applications. Due to the necessities of having fiducial marks and knowing initial approximations for interior and exterior orientation elements in bundle adjustment, it cannot be applied when non-metric cameras are used. Marzan and Karara develop the DLT(Direct Linear Transformation) program which directly transforms comparator coordinates into object space coordinates without approximate values. In this paper, several modifications of original DLT program have been made for accuracy improvement in close-range photogrammetry using non-metric cameras. In modified program, gross error detection method and computation of exterior orientation elements are incorporated, and more iterations are introdued.