• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.219-220
• /
• 2015

본 논문에서는 높은 성능의 속도 제어 특성을 만족하기 위해 위치 기반의 반복제어기를 이용한 속도 제어기를 설계 하여, 레이저 프린터의 OPC 드럼의 속도제어에 적용 하였다. 레이저 프린터 OPC 드럼의 외란은 드럼의 위치에 종속적으로 나타난다. 따라서 위치 기반 반복제어기는 기존의 반복제어기 보다 기준 속도 변동에 강인하며, 레이저 프린터의 다양한 인쇄 속도에 적용 가능하다. 실험 결과, 위치기반 반복 제어기가 기존의 반복제어기 보다 기준 속도 변동에 강인하며 다양한 인쇄 속도에서도 적용 가능함을 보여주었다.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.11
• /
• pp.133-138
• /
• 1999

3차원 트러스 구조물을 설계대상으로, 구조계와 제어계의 동시최적설계문제에 대하여 고찰하였다. 구조 설계에대한 최소중량설계와 제어 설계에대한 외란 억제문제를 설계목적으로 고려하였다. 그리고, 본연구의 유용성을 입증하기위한 수치 시뮬레이션의 결과를 기술하였다.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.378-379
• /
• 2019

본 논문은 LCL 필터를 사용하는 3상 계통연계 인버터의 그리드 전류 오차를 개선하고 고조파 왜곡 현상을 억제하기 위해 다중 공진제어 기법을 슬라이딩 평면에 적용한 슬라이딩 제어기(SMC)를 제시한다. 일반적으로 시스템 파라미터가 변경되거나 계통에 외란이 발생할 경우 슬라이딩 평면이 표류하는 현상이 나타나며 이러한 표류 현상은 시스템 정상상태 오차와 시스템에 고조파 왜곡 현상을 일으키고 계통연계 인버터의 전류 품질에 심각한 영향을 미치게 된다. 이러한 현상을 해결하기 위해 적분 함수가 추가된 SMC가 제안되었으나 해당 제어기는 효과적으로 정상상태 오차를 제거하는 반면 슬라이딩 평면의 표류현상을 충분히 줄여주지 못하는 한계를 가지고 있다. 이러한 정상상태 오차와 표류현상을 제거하기 위해 다중 공진제어 조건을 슬라이딩 평면 함수에 추가한 제어기를 제시한다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.1
• /
• pp.85-92
• /
• 2017

Recently, electric propulsion systems are used for unmanned surface vehicle, fish finder boat, etc. Some of these propulsion systems can be constructed of two electric motors and propellers for advanced impellent force. In this case, the speed difference generated between two propellers, namely, the synchronous error has a bad influence on the energy efficiency and course error. In this study, a synchronous control system is designed to restrain synchronous error caused by disturbance and mismatched dynamic characteristics. The control system is composed of the reference model, pre-filters, speed controllers, and synchronous controllers. The reference model is used for calculating the decoupled synchronous error and control input for each propulsion system. The pre-filters and speed controllers are designed in order that the propulsion system may follow the reference signal without overshoot and input saturation. And the synchronous controllers are designed from the viewpoint of stable and quick synchronization through root locus mothed approach. Finally, the simulation results show that the designed control system is effective for the disturbance.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.2
• /
• pp.349-356
• /
• 2018

In this study, the synchronous control system is designed to restrain the speed difference generated between two propellers, namely, synchronous error in a dual electric propulsion system of unmanned surface vehicle, fish finder boat, etc. The control system based on coupling structure is composed of pre-filters and speed controllers for each propulsion system and a synchronous controller cross-coupled between two propulsion systems. The pre-filter and speed controller are designed in order that the propulsion system may follow the speed reference without overshoot and input saturation. And the synchronous controller is designed in consideration of damping and quickness of the synchronous controller system after analyzing effect of the skew disturbance and mismatched dynamic characteristics on synchronous error. Finally, the simulation results show that the designed control system is effective for elimination of synchronous error.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.11 no.1 s.22
• /
• pp.23-28
• /
• 2005

We have investigated the usefulness cf active stabilizing system to reduce ship rolling under disturbances, using varying reaction cf the flaps. In the proposed anti-rolling system for a ship, the flaps as the actuator are installed on the stem to reject rolling motion induced by disturbances like wave. The action induced by flaps which depends on power of disturbances am take the ship balance. Especially, in this study we identify the controlled system under the undefined system structure using spectral analysis and experimental studies. Based on these informations, we design the controller to evaluate the usefulness of the proposed system.

• Korean Journal of Optics and Photonics
• /
• v.33 no.3
• /
• pp.99-105
• /
• 2022

We have evaluated the performance of an all-optical automatic gain-controlled (AGC) erbium-doped fiber amplifier (EDFA) to suppress the optical signal fluctuation induced by atmospheric turbulence in terrestrial free-space optical communication systems. In our measurements, the input power into the EDFA was set to be -30 dBm and -10 dBm to operate the amplifier in the small-signal and saturation regions, respectively. The fluctuations in the optical signal were emulated with an acousto-optic modulator driven with a sinusoidal voltage. From the measured results, we have found that an all-optical AGC EDFA could suppress the optical signal fluctuation effectively, as long as the EDFA operated in the small-signal region with a high feedback amplified spontaneous emission (ASE) power.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.1
• /
• pp.39-47
• /
• 2014

In this study, 2 degree of freedom PID controller is added to the conventional feed-forward controller for the purpose of improving its limitations such as set-point of tracking performance and disturbance suppression performance in the conventional PID controller. And the controller parameters optimization as a Real Coded Genetic Algorithm (RCGA) is used. Simulation and experiments verify the performance of the controller.

• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.1
• /
• pp.56-61
• /
• 2011

Many control techniques have been proposed in order to improve the control performance of the control system. The degree of freedom on control in the control system is decided by the number of the closed-loop transfer function which can adjust independently. The controller design scheme with two degrees of freedom(TDOF) is extensively used for securing the good control performance to trace a desired value and reject disturbance. In this paper, PID controller is used by controller with TDOF and the design method for control system with TDOF is proposed by the normal method. Using the coefficients of the transfer function of the plant, the transfer function of the control system is normalized by the proposed design method and the parameters of the controller are determined. The control system with the TDOF is constructed by using this method. Through the simulation results, the usefulness of the proposed algorithm is proved.

• Journal of the Institute of Convergence Signal Processing
• /
• v.4 no.2
• /
• pp.53-60
• /
• 2003

For the high center of gravity vehicles the roll stiffness of their suspensions is arranged to be very high because such vehicles are in some danger of tipping over in cornering. In some cases, the effective roll stiffness is determined significantly by the compliance of the tires because of the very stiff anti-roll members incorporated in the suspension. In such cases, it is clear that the shock absorbers which may be effective in damping heave oscillations have little effect on roll oscillations. Therefore, wind gusts and roadway unevenness may cause large swaying oscillations. In this paper, to improve the stability for the high center of gravity vehicles a control scheme to augment the damping of the roll mode is proposed. As the feedback signals needed to provide damping of the roll motion, the front or rear steer angles or both are chosen because they are very related to roll motion. The scheme is effective from moderate to high speeds and stabilizes the roll mode without introducing disturbance moments from roadway unevenness as shock absorbers do. The validity on the proposed method is verified through the computer simulation.