• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1918-1919
• /
• 2011

상체 지원 외골격 로봇은 크게 인간의 근력을 보조하는 형태와 인간의 근력을 증강하는 형태가 있다. 여기서는 인간의 근력을 증강하는 외골격 로봇을 중심으로 기술하고자 한다. 이러한 외골격 로봇은 팔의 EMG (Electromyograph;근전도) 신호를 측정하는 방법보다는 손의 힘을 직접 감지하는 방법을 통한 팔꿈치와 어깨의 엑추에이터를 구동하는 방식을 취하는 경향이 있다. 본 논문에서도 후자의 방식을 이용하여 손에 작용하는 힘을 분석하여 외골격 로봇을 움직이는 방식을 취하였다. 손의 힘 중에서도 인간을 중심으로 볼 때 위방향과 전진방향의 힘을 분석하기 위하여 2개의 F/T(Force/Torque) 센서를 사용하였으며 팔을 벌리는 동작은 엑추에이터 없이 자유롭게 동작이 가능하도록 설계하였다. 이러한 위방향 및 전진방향 힘의 크기를 팔꿈치와 어깨의 엑추에이터의 동작으로 바꾸어 인간의 동작을 도울 수 있고 힘을 증폭할 수 있는 외골격 로봇을 설계 제작하였다. F/T 센서는 손의 힘을 전기적 신호로 바꾸어주는 로드셀로 이루어지며 손의 힘을 최대한 잘 반영하기 위한 구조를 고안하였다. F/T 센서의 전기신호는 증폭기를 거쳐서 잡음을 제거한 후에 A/D 변환하여 processor에서 처리되어진다.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.6 no.2
• /
• pp.15-22
• /
• 2012

The mechanical system of wearable walking assist robot needs to be optimized for adapting with human body structure and the planned control algorithm should have a secure procedure when a incongruity situation which can cause musculoskeletal injury occurs because a wearable robot is attached to a body. The understanding of walking or musculoskeletal motions characteristics must be preceeded and analyzed for developing novel wearable walking assist robot. In this study we tried to find out the capacities of powers and torques of joint actuators to design optimized performances of system and to obtain the analysis data to figure out the characteristics of joint movements during some types of walk. The major types of walk and motion are stair climbing and descending, sit-to-stand motion, and slope walking. In this study all these motions were analyzed experimentally except slope walking.

• Journal of Aerospace System Engineering
• /
• v.11 no.6
• /
• pp.26-33
• /
• 2017

We propose a variable frame structure connected with telescopic mast-shaped shaft for a robot displaying outstanding ability to cross obstacles, and for effective traction control. The wireless control system was built to extend and contract a deployable mechanism, which is shaped into a hoberman sphere assembled with frame structures. In order to develop important parameters for efficient locomotion, we derived an Euler-Lagrange equation for the spherical robot. According to the equation, the DC motor was selected. A prototype mechanism was tested and a Finite-Element Analysis (FEA) was conducted in parallel. Using these data, we constructed a deployable spherical robot with structural stability. The deployable robot moved at a speed of 0.85 m/s from 520 mm to 650 mm.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.12
• /
• pp.1585-1591
• /
• 2011

In this paper, we present a new exoskeleton-type data glove that can sense the movement of the human finger and reflect the force to the finger. The data glove is designed on the basis of the skeletal structure of the human hand, and the finger module has 1 degree-of-freedom because it includes three four-bar mechanism joints in series and a wire-coupling mechanism. In addition, the transmission ratio of the finger module is maintained at 1:1.4:1 over the entire movement range, and hence, the module can perform both extension and flexion. In addition, to enable adduction/abduction motion of the human hand, a unique MCP joint is designed by using two universal joints. To validate the feasibility of the data glove, master-slave control experiments based on force-position control between the data glove and the robot hand are conducted.

• Journal of the Korean Society of Radiology
• /
• v.83 no.5
• /
• pp.1141-1146
• /
• 2022

Extraskeletal osteochondroma, a variant of chondroma, typically arises in the para-articular location of hands and feet. It is a rare disease and is particularly uncommon when joint components are not involved or localized away from joints. Herein, we report a case of extraskeletal osteochondroma in the posterior neck of a 66-year-old female. The characteristic radiologic finding of our case is presented, along with the typical findings of the disease and review of related literature reports.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.295-296
• /
• 2011

• Journal of Appropriate Technology
• /
• v.6 no.2
• /
• pp.219-225
• /
• 2020

Importance of touch equipment and smart learning increases and public institutions and educational facilities are applying smart devices to their daily environments. However, users of public smart devices are at risk of being exposed to the direct and indirect spread of infectious diseases. This study develops an exo-finger that wraps the fingertips of smart device users and is intended to have a disease prevention effect when used on public equipment. An exoskeletal body was fabricated by inserting a secondary material which is a mixture of the activating material, carbon black (CB) and a macromolecular polymer (elastomer) into a mold. This device was confirmed to have a touch function when the CB content was 0.030 wt% or higher, and the content of the elastomer was varied so that it could have a friction force similar to that when a person touches a smart device (a friction coefficient of 2.5). Through experiments, it was concluded that the CB content had little effect on the friction coefficient. As a result of testing the completed prototype on a smart device, it was proven that the developed exoskeletal device can be useful in situations where it is impossible to touch due to wearing protective gears, or when equipment such as gloves is used to prevent the spread of infectious diseases.

• Korean journal of applied entomology
• /
• v.57 no.4
• /
• pp.279-285
• /
• 2018

Different English terms indicating a same part in insect head were arranged according to position and function, and their corresponding different Korean terms were suggested. The terms include lines on head surface, head regions of embryo, external and internal skeletons, internal parts of mouth, long mouths, external parts and basic segments of antenna, antennal shapes, and hairs on surface.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.10
• /
• pp.865-871
• /
• 2015

This study was conducted in order to develop a finger exoskeleton system using ionic polymer metal composites (IPMCs) as the actuator and sensor in a hybrid structure. To use the IPMC as an actuator producing large force, a first order transfer function was obtained using results from a block force for DC excitation that applied to two IPMCs of 20mm-width, 50mm-length, and 2.4mm thickness together. After which the validation of 200gf control with anti-windup PI controller was confirmed. A 5mm-width, 50mm-length, 0.6mm-thickness of IPMC was also modeled as a sensor for tip displacement. As a result, the IPMC sensor could been utilized as a trigger role for the actuator. Finally, an IPMC sensor and actuator were installed on the joint of a single DOF exoskeleton in the hybrid structure, and test for the control of 40gf of block force and predefined sequence of motion was performed.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.10a
• /
• pp.1819-1821
• /
• 2015

재난구조 로봇은 각종 재난상황에 투입되는 로봇으로써 현재의 로봇에 탑재된 카메라 영상 정보만으로 로봇 주변의 환경을 인식하여 작업을 수행하는 데에는 한계가 있다. 본 논문에서는 카메라 영상에 의한 시각정보 이외에 현장의 로봇과 주변환경의 접촉에 의해 발생하는 반발력을 조작자에게 전달하여 실감형 환경인지가 가능하도록 하는 시스템을 제안하고자 한다. 이를 위해 본 연구에서는 조작자에게 다양한 형태의 반발력을 전달할 수 있도록 인체 착용형 로봇인 외골격 로봇을 master 로봇으로 사용하였고, 14 자유도를 가지는 slave 로봇을 원격제어 하여 작업물 조작시의 힘 반향이 조작자에게 전달되도록 제어되고 있음을 확인하였다.