• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.2
• /
• pp.145-154
• /
• 2007

In hydrothermal reaction tests, smectite-to-illite conversion was identified using a domestic bentonite which is favorably considered as a buffer material, and its dependency on various hydrothermal conditions was investigated. The analysis results of the XRD and Si concentration indicated that the smectite-to-illite conversion was a major process of bentonite alteration under the hydrothermal conditions. The temperature, potassium concentration in solution, and pH were observed to significantly affect the smectite-to illite conversion. A model of conversion reaction rate was suggested to evaluate the long-term stability of smectite composing a major constituent of bentonitic buffer. It was expected from the evaluation results that the smectite would keep its integrity for very long disposal time under a normal condition, whitens it might be converted to illite by 50 percent after over $5{\times}10^4$ year of disposal time under a conservative condition and consequently lose its swelling capacity as a buffer material of a repository.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.4
• /
• pp.255-261
• /
• 2020

This study proposes a method of constructing an effective shock absorber. The existing shock absorber is fabricated only with polyethylene; however, the new shock absorber comprises polyethylene on the outside and a high-density material on the inside. The shock was mostly reduced when the density difference between the inner and outer materials was large. Aluminum, titanium, and copper were chosen as the outer structure of two-layer. Shock reduction was most effective in copper with the highest density, and the maximum deceleration was reduced by 43% while the impulse was reduced by 51% in the proposed shock absorber than the traditional shock absorber. In the cases of four-layer and six-layer shock absorbers, the impulse was reduced, but the maximum deceleration was increased. The fuze must survive from the biggest shock and the remaining shock waves should not exceed the threshold. Thus, a two-layer structure shock absorber using polyethylene-copper was proposed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.87-87
• /
• 1999

본 연구에서는 Pulsed Laser Deposition(이하 PDL)방법을 이용하여 Si기판에 (Ba,Sr)TiO3(이하 BST)박막을 MFS-FET(Metal-Ferroelectric-Semiconductor Field-effect Transistor)구조로 제조하였으며 BST박막의 강유전성이 BST 박막에 유도되는 응력에 어떤 영향을 받는지 살펴보았다. 본 연구에서는 완충막을 사용함으로써 BST박막과 완충막간의 격자부정합을 이용하여 BST박막에 강유전성을 유도하려고 하였다. 또한 MFS-FET구조의 BST박막에 유도되는 응력조절을 위하여 BST박막과 완충막의 두께를 변화하였으며 XRD를 통한 구조 분석 및 C-V test를 통한 전기적 특성을 관찰을 하였다. PLD법을 통해서 epitaxial 성장된 BST 박막에서는 Si에 epitaxial 성장된 완충막과의 격자부정합에 의한 BST박막내의 자발분극의 발생이 예상된다. 따라서, 본 연구는 강유전체의 자발분극에 의하여 발생되는 C-V 이력현상이 BST박막과 완충막과의 격자부정합에 의한 응력에 의해 발생될 것으로 예상하여, BST 박막에 유도되는 응력과 C-V 이력현상의 관계를 통하여 상온에서 상유전성을 갖는 BST가 응력에 의하여 어느 정도의 강유전성을 나타내는지를 밝히기 위해 진행되었다. 본 연구에서 사용된 완충막은 YSZ(Yttria Stabilized Zirconia)박막으로 0.4mTorrO2 분위기 하에서 600~80$0^{\circ}C$의 온도에서 증착하여 상형성을 살펴보았고 $700^{\circ}C$에서 epitaxial 성장을 확인하였으며 두께는 30~$\AA$으로 변화하였다. 또한 BST박막은 완충막과의 전압분배를 고려해 300~2000$\AA$으로 두께를 변화를 시키며 증착하였다. MFS 구조에서 Al 전극을 사용하여 완충막과 BST박막간의 두께 변화에 따른 Capacitance - Voltage(C-V) 측정을 하였으며 이를 통하여 강유전상의 특성인 C-V 이력현상을 관찰하였다. 그 결과 YSZ 박막에서는 C-V 이력현상이 나타나지 않았으며 BST 박막에서는 약 1.2V의 C-V이력현상이 보였다.

• Ecology and Resilient Infrastructure
• /
• v.5 no.1
• /
• pp.45-53
• /
• 2018

Ecological networks can be generally classified into core areas, buffer zones, and corridors. Particularly, buffer zones connect core areas or ecological corridors, and preserve ecological network by reducing the impact from outside. We examined related laws and researches about buffer zone establishment associated with the resources of high ecological and conservation value to find out more researches are needed. In this study, we investigated various examples of the criteria for establishing buffer zones at domestic and overseas. Based on the results of railway environmental impact assessment and railway construction guidelines, we analyzed the application methods applicable to the railway development area and proposed the criteria to evaluate land cover status, species diversity, rarity, and connectivity. Through this study, the environmental and ecological value around the development area of the railroad was examined to reduce the environmental damage from railroad construction.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.1
• /
• pp.17-24
• /
• 2018

A buffer in a geological disposal system minimizes groundwater inflow from the surrounding rock and protects the disposed high-level waste (HLW) against any mechanical impact. As decay heat of a spent fuel causes temperature variation in the buffer that affects the mechanical performance of the system, an accurate estimation of the temperature variation is substantial. The temperature variation is affected by thermal and material properties of the system such as thermal conductivity, density and specific heat capacity of the buffer, and thus these factors should be properly included in the design of the system. In particular, as the thermal properties are variable depending on the density and water content of the buffer, consideration of the effects should be included in the analysis. Hence, in this study, a numerical model based on finite element method (FEM) which is able to consider the change of density and water content of the buffer was established. In addition, using the numerical model, a parametric study was conducted to investigate the effect of each thermal property on the temperature variation of the buffer.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.19 no.1
• /
• pp.51-56
• /
• 2013

From the time the product is manufactured until it is carried and ultimately used, the product is subjected to some form of handling and transportations. During this process, the product can be subjected to many potential hazards. One of them is the damage caused by shocks. In order to design a product-package system to protect the product, the peak acceleration or G force to the product that causes damage needs to be determined. When a corrugated fiberboard box loaded with products is dropped onto the ground, part of the energy acquired due to the action of the gravitational acceleration during the free fall is dissipated in the product and the package in various ways. The shock absorbing characteristics of the packaging cushion materials are presented as a family of cushion curves in which curves showing peak accelerations during impacts for a range of static loads are shown for several drop heights. The new method for determining the shock absorbing characteristics of cushioning materials for protective packaging has been described and demonstrated. It has been shown that cushion curves can be produced by combining the static compression and impact characteristics of the material. The dynamic factor was determined by the iterative least mean squares (ILMS) optimization technique in which the discrepancies between peak acceleration data predicted from the theoretical model and obtained from the impact tests are minimized. The approach enabled an efficient determination of cushion curves from a small number of experimental impact data.

• Journal of Korea Soil Environment Society
• /
• v.3 no.3
• /
• pp.3-10
• /
• 1998

Acid/Base buffer capacity of soil is very important in prediction of contaminant transport for its direct impact on pH change of the system composed of soil-contaminant-water, In this research, diffuse double layer theory as well as two layer electrostatic adsorption model are applied to develop a theoretical model of buffer capacity of soil. Model application procedures are presented as well. Buffer capacity of Georgia kaolinite and Milwhite kaolinite was measured by acid-base titration. Model prediction and experimental results are compared.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1999.04a
• /
• pp.217-221
• /
• 1999

본 연구는 직렬생산시스템의 제공품(Work in Process Inventory)을 최소화하기 위하여 완충 저장시설의 최적소요 및 배분을 위한 시뮬레이션 모델의 개발이다. 이를 위하여 먼저 목표 생산률을 만족하기 위한 완충저장시설의 총소요산출을 위하여 적정설비배치를 고려한 완충저장시설의 수요 및 적정배분을 함께 고려한 혼합모델을 개발하였다. 먼저 목표생산률의 만족과 적정설비배치를 동시에 고려할 경우, 완충저장시설의 총소요산출을 위한 CAN-WIP 모델을 개발하고 이를 최적 배분하기 위하여 이진탐색(Binary Search)방법과 휴리스틱 방법인 Beam Search 방법을 사용하였다. 이를 기존의 시뮬레이션 모델 (FACTOR/AIM, AutoMod 등)을 사용하여 그 결과를 비교하였다. 이를 위한 전산프로그림을 개발하고 예제를 통하여 그 결과를 보였다.

• 한국생물공학회:학술대회논문집
• /
• 2000.04a
• /
• pp.203-206
• /
• 2000

Calcium carbonate $(CaCO_3)$ bead immobilized with alginate were developed as buffer system to enhance the cultivation efficiency of bifidobacteria. When Bifidobacteriuim longum KCTC 3128 and HLC 3742 were independently cultivated in 2.5-liter fermenter buffered the $CaCO_3$ bead, NaOH, $Na_2CO_3$, and $NH_4OH$. The proliferation of bifidobacteria and their storage stability were higher in culture broth buffered $CaCO_3$ beads than in culture broth buffered with NaOH, $Na_2CO_3$, and $NH_4OH$. Therefore, $CaCO_3$ bead may be useful as a buffer to enhance of the cultivation efficiency and viability of bifidobacteria.

• KDI Journal of Economic Policy
• /
• v.34 no.4
• /
• pp.69-90
• /
• 2012

This paper explores the effect of the countercyclical capital buffer using a DSGE (Dynamic Stochastic General Equilibrium) model with a banking sector. The main results are following. First, if the CAR (capital asset ratio) rises by 1%p as the countercyclical capital buffer, output and credit would increase less than otherwise by 0.8%p and 1.2%p, respectively. Second, the countercyclical capital buffer would decrease both credit and debt of banks, or deposit, and, as a result, boost the CAR. However, if we are going to use monetary policy to control credit expansion by allowing the interest rate to respond to credit, bank capital would also diminish, which would cause the CAR to be lower.