• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.3
• /
• pp.202-211
• /
• 2017

In this study, numerical simulations were performed using the ${\gamma}-Re_{\theta}$ transition model of KFLOW for the transitional flow over the KARI-11-180 airfoil. Numerical results of KFLOW were compared with experimental data and two other numerical results of XFoil and MSES. Fully turbulence model was predicted high skin friction drag than transition model because fully turbulence model could not solve the transitional flow. Numerical predictions using the ${\gamma}-Re_{\theta}$ model of KFLOW show a good agreement with experimental data and other numerical results. Present numerical results were confirmed the state of drag bucket due to dramatic changing of the transition location on the airfoil surface.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.8
• /
• pp.895-903
• /
• 2007

Design equations of DC blocks terminated in arbitrary impedances are newly suggested and a microstrip DC block is tested for the perfect matching. The DC block is a two-port passive component and the power excited at a port is transmitted into another port. However, all the excited power at the input can not be delivered to the output and therefore most of the conventional DC blocks can not be perfectly matched with arbitrary termination impedances. To solve the matching problem, its one-port equivalent resonant circuit model, front which design equations can be derived, is newly suggested. Using the derived design equations, any DC block can be designed, perfectly matched without any restriction of coupling coefficients. To verify the derived design equations, measurements were carried out and the results are in good agreement with prediction, showing insertion and return losses at 4.1 GHz are 0.82dB and -31dB, respectively.

• Journal of the Korea Concrete Institute
• /
• v.18 no.4 s.94
• /
• pp.469-477
• /
• 2006

Models to predict the ultimate strength of simply supported or continuous deep beams with web openings are proposed. The derived equations are based on upper-bound theorem. The concrete is assumed as a perfectly plastic material obeying the modified Coulomb failure criteria with zero tension cutoff. Reinforcing bar is considered as elastic-perfectly plastic material and its stress is calculated from the limiting principal compressive strain of concrete. The governing failure mechanisms based on test results are idealized as rigid moving blocks separated by a hyperbolic yield line. The effective compressive strength of concrete is calculated from the formula proposed by Vecchio and Collins. Comparisons with existing test results are performed, and they show good agreement.

• Economic and Environmental Geology
• /
• v.41 no.6
• /
• pp.731-746
• /
• 2008

Most multiphase flow simulators following fractional flow approach assume incompressibility of fluid and matrix or consider only two phase flow (water and air, water and NAPL). However, in this study, mathematical governing equations were developed for fully compressible three-phase flow using fractional flow based approach. Also, fully compressible multiphase flow simulator (CMPS) considering compressibilities of matrix and fluid was developed using the mathematical governing equations. In order to verify CMPS, the CMPS were compared with analytical solution and the existing multiphase flow simulator, MPS, which had been developed for simulating incompressible multiphase flow (Suk and Yeh 2007; Suk and Yeh 2008). According to the results, solutions of CMPS and MPS and analytical solutions are well matched each other. Thus, it is found that CMPS has the capability of simulating compressible three phase flow phenomena assuming compressibilities of fluids and matrix.

• Journal of Korean Home Economics Education Association
• /
• v.5 no.1
• /
• pp.87-95
• /
• 1993

본 연구는 교육부에서 의도하는 국민학교 실과 과목의 식품영양 단원의 지침서 내용과 현장에서의 교사 수업 실태를 교육관련 전문지인 새교육, 새교실, 새수업등에 게재된 현장교사들의 지도안 내용과 인천시내 공립국민학교 교사 510명과 학생 1,754명을 대상으로 설문조사를 통한 내용을 분석하였는데 그 결과는 다음과 같다. 1. 교사용 지침서에 제시된 교과목표 및 단원 내용과 현장 교사들의 지도안 내용은 완전일치 하였다. 2. 교육부가 제시한 수업시수가 알맞다는 응답이 4학년 88.7%, 5학년 87.4%, 6학년은 87.8%였으나 약 10%정도의 교사는 식품 영양단원에 더 시간이 필요하다고 응답하였고. 현재의 시간을 줄여야 한다는 응답도 4학년 0.8% 5학년 2.6% 6학년 2.4%나 되었다 또한 28-38%의 교사가 실과시간을 다른시간으로 활용한 적이 있다고 응답하였으며 3번이상 다른시간으로 쓴 경우도 4학년 6.5%, 5,6학년은 11%나 되었다. 3. 교육부가 제시한 교수방법보다 다양한 교수방법이 현장에서 실시되고 있었으나 가장 많이 사용되는 교수방법은 4, 5, 6,학년 모두 설명, 발표 판서, 교과서 읽기 등이었고 실험 조사, 역할 놀이, 토의, 시범 등은 드물게, 필름이나 슬라이드, 카세트 등은 거의 사용하지 않는 것으로 나타났다. 4. 사용된 학습자료로는 교과서, 교사용 지침서, 학습 과제장 등이 주된것이었으며 그 이외의 자료는 극히 활용도가 미약하였다. 5. 실험 실습을 위한 실습은 전혀 갖추고 있지 못한 실정이었으며, 조리 실습은 학생들이 재료와 도구등을 준비(4학년 96.5%, 5학년 96.1% 6학년 95.7%)하여 실시하고 있는 것으로 나타났다.

• Journal of The Korean Association For Science Education
• /
• v.25 no.2
• /
• pp.111-121
• /
• 2005

The purpose of this study was to analyze characteristics of experimental design and evidence choice of the elementary school students in problem solving process related to controlling variable. For this study, 96 6th grade students were selected and tested with Science Reasoning Task. This study revealed that the types of experimental design were categorized as variance of control variable, controlling of causal variable, perfect controlling variable, imperfect controlling variable, variance of all variable. Prior belief had a strong influence on student's experimental design. The types of evidence choice were categorized as perfect controlling variable, controlling causal variable, variance of causal variable. The degree of controlling variable in evidence choice process was much lower than that in experimental design. Most students tended to choose evidence according to prior belief without controlling variable. The results of this study implied that student's prior belief and characteristic of science process skills should be considered to develop program for promoting controlling variable ability.

• Journal of Korea Water Resources Association
• /
• v.37 no.8
• /
• pp.613-622
• /
• 2004

The simulation results of final closing by the developed model considering the flows through tide embankment of non-Darcy and through sluice gate agree well to the observed data which shows the model applicability. In comparative analysis with observed data, the simulation results by Homma(1958) are more accurate than those by Na(1987). The free flow equation with discharge coefficient, regardless of free or submerged flows, by Na based on the submergence ratio is applicable to the engineering practices. Because two simulated discharges are greater than the actual one, the correction of discharge coefficients reflecting the irregular section of actual closing gap situation is necessary. In the hydraulic analysis of final closing, the flow through tide embankment has been generally analysed by Darcy. Hydraulic analysis by the correct discharge through tide embankment of non-Darcy flow is necessary, because the ratio between flows through tide embankment and closing gap is relatively great at final closing.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.12
• /
• pp.2364-2375
• /
• 1994

For the efficient recognition of printed Korean characters, a multiplexed minimum average correlation energy(MMACE) filter is proposed. Proposed method solved the disadvantages of the tree structure algorithm which recognition system is very huge and recognition method is sophisticated. Using only one consonant MMACE filter and one vowel one, we recognized the full Korean character. Each MMACE filter is multiplexed by 4 K-tuple MACE filters which are synthesized by 24 consonants and vowels. Hence the proposed MMACE filter and the correlation distribution plane are divided by 4 subregion. We obtained the binary codes for the Korean character recognition from each correlation distribution subplane. And the obtained codes are compared with the truth table for consonants and vowels in computer. We can recognize the full Korean characters when substitute the corresponded consonant or vowel font of the consistent code to the correlation peak place in the output correlation plane. The computer simulation and optical experiment results show that the proposed compact Korean character recognition system using the MMACE filters has high discrimination capability.

• Solar Energy
• /
• v.15 no.2
• /
• pp.25-37
• /
• 1995

This paper presents an approximate analytical solution to one-dimensional model of the charging process for stratified thermal storage tanks, in which variation of the inlet temperature as well as the momemtum-induced mixing is taken into accout. The mixing is incorporated into the model as a constant-depth perfectly mixed layer above the plug flow region. Based on the superposition principle, the variable inlet temperature is approximated by a number of step functions. Temperature distributions for the thermocline corresponding to three types of interfacial condition arr successfully derived in terms of well-defined functions, so that a linear combination of them constitutes the final solution. Validity and utility of this work is examined through the comparison of the approximate solution with an exact solution available for the case of linearly increasing inlet temperature. With increasing the number of steps, the present solution asymptotically approaches to the exact one. Even with a limited number of steps, the present results favorably agree with those by the exact solution for a wide range of the mixing depth. Also, it is revealed that fewer steps are needed for meaningful predictions as the mixing. depth becomes larger.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.36 no.1
• /
• pp.11-19
• /
• 2024

In this study, the program was modified by adding the empirical formula of EurOtop (2018) to enable calculation of wave overtopping on armoured slope structures in the FUNWAVE-TVD model using the fully nonlinear Boussinesq equation. The validity of the modified numerical model was verified by comparing it with CLASH data and experiment data for the rubble mound structure. This model accurately reproduced the change in wave overtopping rate according to the difference in the roughness factor of the armoured block, and well reproduced the rate of decrease in wave overtopping rate due to the increase in relative freeboard. The overtopping rate of the armoured slope structures showed significant differences depending on the positioning condition of the armoured blocks. When Tetrapods were placed with regular positioning, the overtopping rate increased significantly compared to when they were placed with random positioning, and it was consistent with when they were placed with Rocks. Meanwhile, when rocks were placed in one row, the wave overtopping rate was greater than when rocks were placed in two rows, which is believed to be due to the influence of the roughness and permeability of the structure's surface.