• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.1
• /
• pp.239-246
• /
• 2017

There are various transversal structures (small dams or drop structures) in median and small streams in Korea. Most of them are concrete structures and it is so hard to exclude low-level water. Unless drainage valves and/or gates would not be installed near bottom of bed, sediment from upstream should be deposited and also contaminants attached to the sediments would devastatingly threaten the water quality and ecosystem. One of countermeasures for such problem is the bypass pipe installed underneath the transversal structure. However, there is still issued whether it would be workable if the gravels and/or stones would roll into and be not excluded. Therefore, in this study, the conditions to exclude the rip stone which enter into the bypass pipe was reviewed. Based on sediment transport phenomenon, the behavior of stones was investigated with the concepts from the critical shear stress of sediment and d'Alembert principle. As final results, the basis condition (${\tau}_c{^*}$) was derived using the Lagrangian description since the stones are in the moving state, not in the stationary state. From hydraulic experiments the relative velocity could be obtained. In order to minimize the scale effect, the extra wide channel of 5.0 m wide and 1.0 m high was constructed and the experimental stones were fully spherical ones. Experimental results showed that the ratio of flow velocity to spherical particle velocity was measured between 0.5 and 0.7, and this result was substituted into the suggested equation to identify the critical condition wether the stones were excluded. Regimes about the exclusion of stone in bypass pipe were divided into three types according to particle Reynolds number ($Re_p$) and dimensionless critical shear force (${\tau}_c{^*}$) - exclusion section, probabilistic exclusion section, no exclusion section. Results from this study would be useful and essential information for bypass pipe design in transveral structures.

• The Journal of Natural Sciences
• /
• v.10 no.1
• /
• pp.209-216
• /
• 1998

The results of the study of diving the 21st century's Korea fashion market into consumer market, fashion market, and a new marketing strategy are as follows. The 21st consumer market is First, a fashion democracy phenomenon. As many people try to leave unconditional fashion following, consumer show a phenomenon to choose and create their own fashion by subjective judgements. Second, a phenomenon of total fashion pursuit. Consumer in the future are likely to put their goals not in differentiating small item products, but considering various fashion elements based on their individuality and sense of value. Third, world quality-oriented. With the improvement of life level, it accomplishes to emphasize consumers' fashion mind on the world wide popular use of materials, quality, design and brand image. Fourth, with the entrance of neo-rationalism, consumers show increasing trends to emphasize wisdom, solidity in goods strategy pursuing high quality fashion and to demand resonable prices. Fifth, concept-oriented. Consumers are changing into pursuing concept appropriate to individual life scene. Prospecting the composition of the 21st century's fashion market, First, sportive casual zone will draw attention more than any other zone. This is because interest in sports will grow according to the increase of leisure time and the expasion of time and space in the 21st century, and also ecology will become the important issue of sports sense because of human beings's natural habit toward nature. Second, the down aging phenomenon will accelerate its speed as a big trend. Third, a retro phenomenon, a concept contrary to digital and high-tech, will become another big trend for its remake, antique, and classic concept in fashion market with ecology trend. New marketing strategy to cope with changing fashion market is as follows. First, with the trend of borderless concept, borders between apparels are becoming vague, for example, they offer custom-made products to consumers. Second, as more enterprises take the way of gorilla and guerrilla where guerrillas who aim at niche market show up will develop. Basically, they think highly of individual creative study, and pursue the scene adherence with high sensitiveness. However this polarization becomes mutually-supplementing relationship showing gorilla's guerilla movement, and guerilla's gorilla high-tech. Third with the development of value retailing, enterprises pursuing mass merchandising of groups called category killers are expanded and amplified to new product fields, and expand business' share. Fourth, using outsourcing, the trend to use exterior function leaving each enterprise's strength by inspecting its own work is gradually strong. Fifth, with the expansion of none store sale, the entrance of the internet and the CD-ROM sales added to communication sales such as catalogues are specified. An eminent American think tank expect that 5-5% of the total sale of clothes and home goods in 2010 will be done by none store sale. Accordingly, to overcome the problems, First international, global level marketing, Second, the improvement of technology, Third, knowledge-creating marketing are needed.

• Korean Journal of Agricultural Science
• /
• v.19 no.2
• /
• pp.201-237
• /
• 1992

본(本) 연구(硏究)는 1992년(年) 2월(月)부터 동년(同年) 8월(月)까지 한국(韓國)의 농어촌진흥공사(農漁村振興公社)(RDC)와 말레시아의 KTA기술용역단간(技術用役團間)의 기술제휴하(技術提携下)에 아세아개발은행(亞細亞開發銀行)의 기술협력기금(技術協力基金)에 의(依)한 말레지아북부(北部) Terengganu 농촌개발제(農村開發第)2단계사업(段階事業)의 타당성조사연구(妥當性調査硏究) 결과(結果) 중 말레시아정부(政府)의 경제정책방향(經濟政策方向), 농업개발(農業開發) 및 사업(事業)의 경제적(經濟的) 재무적(財務的) 타당성(妥當性)만을 발췌(拔萃)하여 본(本) 논문(論文)에 수록(收錄)하였다. 본(本) 농촌개발사업지구(農村開發事業地區)는 말레시아의 북동(北東)쪽에 위치(位置)하고 있는 Terengganu State의 Setiu-Besut양(兩) Distict가 포함(包含)되는데 경제적(經濟的)으로 가장 낙후(落後)된 지역(地域)으로 매년(每年) 행사(行事)처럼 찾아오는 홍수(洪水)때문에 농경지(農耕地)를 집약적(集約的)으로 경작(耕作)하지 못함으로써 지역농민(地域農民)들은 빈곤(貧困)에서 벗어나지 못하고 있고 침수기간중(浸水期間中)에는 지역(地域)의 경제활동(經濟活動)은 물론(勿論) 교통(交通)마저 불통(不通)되고 농촌하부구조(農村下部構造)의 손실(損失)은 물론(勿論) 사회경제적(社會經濟的)인 손실(損失)이 크며 Setiu River의 하구(河口)가 침전(沈澱)되어 어선(漁船)의 출입(出入)이 점점(漸漸) 곤란(困難)해지므로써 어민(漁民)들의 생계(生計)에도 위협(威脅)을 주는 지역(地域)이다. 따라서 본(本) 타당성(妥當性) 조사연구(調査硏究)의 근본적(根本的)인 목적(目的)은 농촌(農村)의 빈곤(貧困)을 타파(打破)하기 위하여 (1) 홍수(洪水)를 방지(防止)하고, 배수(排水) 및 관개개선(灌漑改善)을 하며, 하구(河口)를 개발(開發)하여 어민(漁民)들의 생산활동(生産活動)을 돕고 지역주민(地域住民) 및 농민(農民)들의 경제활동(經濟活動) 및 농업생산성(農業生産性)을 제고(提高)시키며 (2) 환경보호(環境保護) 및 관리(管理)를 통(通)하여 지역주민(地域住民)에게 쾌적(快適)한 농촌생활환경(農村生活環境)을 제공(提供)하고 생태계(生態系)의 변화(變化)를 방지(防止)하며 (3) 다각적(多角的)인 영농활동(榮農活動)을 통(通)하여 지역농민(地域農民)의 소득(所得)을 극대화(極大化) 할 수 있는 개발(開發)의 기본구상(基本構想)과 이에 대한 기술적(技術的) 경제적(經濟的) 타당성(妥當性)을 구명(究明)하는 것이다. 본(本) 사업지역(事業地域)의 총면적(總面積)은 9,500ha이며 이는 4,680ha의 기설지구(旣設地區)의 개보수관개사업(改補修灌漑事業)과 500ha의 과수단지(果樹團地), 200ha의 채소단지(菜蔬團地), 500ha의 옥수수단지(團地), 250ha의 엽연초생산단지(葉煙草生産團地), 2,760ha의 오일팜 및 고무나무단지에 소, 염소 및 양(洋)을 사육(飼育)하는 종합적(綜合的)인 농촌개발(農村開發)로서 농가(農家)의 농업소득제고(農業所得提高)에 큰 기여(寄與)를 하게 되며 Setiu강(江)의 유역(流域) 4,090ha에 대한 홍수경감대책(洪水輕減對策)으로 지역주민(地域住民)의 생활안정(生活安定) 및 교통(交通), 관광(觀光), 사회경제적(社會經濟的) 생산활동(生産活動)을 촉진(促進)하는 사업(事業)을 하게된다. 본(本) 사업(事業)의 공사기간(工事期間)은 1993년(年)부터 5개년간(個年間)이며 총사업비(總事業費)는 외화(外貨) 2천만불(千萬弗)을 포함(包含)하여 5천(千) 5백만불(百萬弗)로 추정(推定)되었다. 년간사업수익(年間事業收益)은 사업(事業)의 완전운영기간(完全運營期間)인 2003년(年)을 기준(基準)으로 할 때 15,541백만불(百萬弗)로 추정(推定)되었으며 사업(事業)의 내구기간(耐久期間)은 30년(年)으로서 2023년(年)까지 생산(生産)이 계속(繼續)될 것이다. 본(本) 사업(事業)의 전체재무수익율(全體財務收益率)은 22.49%이며 경제적(經濟的) 수익률(收益率)은 19.30%로 경제적(經濟的)인 타당성(妥當性)이 매우 높음을 알 수 있다. 모든 사업(事業)이 계획(計劃)대로 성공적(成功的)으로 추진(推進)될 경우 사업지역내(事業地域)의 몽리농가(蒙利農家) 4,000호(戶)가 큰 혜택(惠澤)을 보게되고 농촌(農村)의 빈곤수준(貧困水準)(Poverty Line)은 현재(現在)의 36%에서 18%수준(水準)으로 경감(輕減)될 것이 기대(期待)되고 있다.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.2
• /
• pp.148-155
• /
• 2009

Statement of problem: The interest in all-ceramic restorations has increased as more techniques have become available. With the introduction of machinable dental ceramics and CAD/CAM systems there is a need to evaluate the quality levels of these new fabrication techniques. Purpose: This study is to evaluate the crown fidelity(absolute marginal discrepancy and internal gap) of various zirconia-based all-ceramic crowns fabricated with different CAD/CAM(computer-assisted design/computer-assisted manufacturing) systems and conventional cast metal-ceramic crowns. Material and methods: A resin tooth of lower right second premolar was prepared. After an impression was taken, one metal master die was made. Then 40 impressions of metal master dies were taken for working dies. 10 crowns per each system were fabricated using 40 working dies. Metal-ceramic crowns were cast by using the conventional method, and Procera, Lava, and Cerec inLab crowns were fabricated with their own CAD/CAM manufactruing procedures. The vertical marginal discrepancies and internal gaps of each crown groups were measured on a metal master die without a luting agent. The results were statistically analyzed using the one-way ANOVA and Tukey's HSD test. Results: 1. Vertical marginal discrepancies were $50.6{\pm}13.9{\mu}m$ for metal-ceramic crowns, $62.3{\pm}15.7{\mu}m$ for Procera crowns, $45.3{\pm}7.9{\mu}m$ for Lava crowns, and $71.2{\pm}2.0{\mu}m$ for Cerec inLab crowns. 2. The Internal gaps were $52.6{\pm}10.1{\mu}m$ for metal-ceramic crowns, $161.7{\pm}18.5{\mu}m$ for Procera crowns, $63.0{\pm}10.2{\mu}m$ for Lava crowns, and $73.7{\pm}10.7{\mu}m$ for Cerec inLab crowns. Conclusion: 1. The vertical marginal discrepancies of, 4 crown groups were all within the clinically acceptable range($120{\mu}m$). 2. The internal gaps of LAVA, Cerec inlab, and metal-ceramic crowns were within clinically acceptable range except Procera crown($140{\mu}m$).

• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.1
• /
• pp.48-54
• /
• 2010

Purpose: The objective of this study was to evaluate and compare the accuracy of impression body taking by the closed and the open tray impression technique with 3 types of impression tray. Individual tray, metal stock tray and polycarbonate tray were used. Materials and methods: Nine closed tray impressions were taken by individual tray, metal stock tray and polycarbonate stock tray, respectively with polyether impression material. 9 open tray impressions were also acquired by same manner. Precision analysis on the master models was performed by attaching the reference frameworks with alternate single screws and measuring the vertical fit discrepancy of respective analogues in working cast with a stereo microscope. Data were analyzed by 1 way ANOVA and independent t-test. Results: The average fit accuracy of impression bodies was calculated. With the closed tray impression technique, there were significant statistical differences in vertical fit discrepancy according to the types of tray. The individual tray group showed the lowest value and the polycarbonate stock tray group represented the highest. With the open tray impression technique, there was no significant difference in vertical fit discrepancy. Significant statistical difference in vertical fit discrepancy was found between the open and the closed impression technique with the polycarbonate stock tray. Conclusion: From the results above, more precise impressions could be acquired by the rigid individual tray compared with the polycarbonate stock tray. It was hard to get consistent accuracy impressions by the closed tray impression technique with polycarbonate stock trays.

• Korean Journal of Food Science and Technology
• /
• v.36 no.2
• /
• pp.217-225
• /
• 2004

This study was carried out to reduce the loss of frozen dough quality during frozen storage. Using response surface method, ascorbic acid 160.4 ppm, L-cysteine 63.1 ppm, and SSL 0.6% were found to be optimum, with xanthan gum 0.3% (formula A) and Ultra tex-3 5% (formula B) added as cryoprotectants. During frozen storage at $-20^{\circ}C$, control rapidly deteriorated after 4 weeks, while formulas A and B showed slight deterioration with immutable quality after 10 weeks.

• Journal of Life Science
• /
• v.22 no.10
• /
• pp.1392-1398
• /
• 2012

This study investigated the effects of diet of different forages on growth performance and carcass characteristics of Hanwoo steers. Twenty-one Hanwoo steers were randomly allocated to three groups (fed hay, reed, and reed with rice straw) of seven steers each. Initial and final body weights of control, T1, and T2 groups were 125.5, 128.3, 128.3 kg and 697.4, 614.6, 706.7 kg, respectively. Average daily gain tended to increase in controls (0.70 kg/d) and the T2 group (0.71 kg/d) but not as much in the T1 group (0.60 kg/d); however, there was no significant difference. DMI was not significantly different among the treatment groups, but T1 was relatively lower than the other groups. For the yield traits, carcass weight was not significantly different between controls and the T2 group but was greater in the T2 group compared to the T1 group (p<0.05). Back fat thickness and rib eye area were higher in controls and T2 compared to T1; yield grade (A:B:C, %) was greater in T1 (43:57:0) compared to the other groups (control 0:71:29; T2 29:42:29). For the quality traits, fat color and texture were not significantly different among groups. However, meat color and maturity were significantly greater in T1 compared to T2 (p<0.05). Marbling score and appearance rate of over 1st meat quality grade were greater in the control and T2 groups compared to the T1 group. Based on the results, growth performance, feed utilization, and carcass traits appeared to improve when roughage containing rice straw plus reed was offered. Therefore, reed is worth considering as a roughage source for fattening Hanwoo steers.

• Journal of the Korean Home Economics Association
• /
• v.37 no.5
• /
• pp.61-84
• /
• 1999

The purpose of this study is to understand the context of cosumers' lives in Korea with a narrative analysis method. The epistemological orientation of eh narrative analysis is Interpretivism, which blends the two polar philosophical perspectives, Empiricism and Rationalism, and includes Narrotology, Hermeneneutics, Semiotics, and Structural Criticism. Narrative analysis takes as its object of investigation the story itself. This study collects eleven narrative plots from four housewives, into which Labov's structural approach is applied. This study shows clearly that the socio-cultural environment in which consumers live has strong influence on their consumption behavior and also reveals that narrativization tells not only about past actions but how individuals understand those actions, that is, meaning.

• The KIPS Transactions:PartB
• /
• v.10B no.3
• /
• pp.281-286
• /
• 2003

A large number of features are collected for problem solving in real life, but to utilize ail the features collected would be difficult. It is not so easy to collect of correct data about all features. In case it takes advantage of all collected data to learn, complicated learning model is created and good performance result can't get. Also exist interrelationships or hierarchical relations among the features. We can reduce feature's number analyzing relation among the features using heuristic knowledge or statistical method. Heuristic technique refers to learning through repetitive trial and errors and experience. Experts can approach to relevant problem domain through opinion collection process by experience. These properties can be utilized to reduce the number of feature used in learning. Experts generate a new feature (highly abstract) using raw data. This paper describes machine learning model that reduce the number of features used in learning using heuristic function and use abstracted feature by neural network's input value. We have applied this model to the win/lose prediction in pro-baseball games. The result shows the model mixing two techniques not only reduces the complexity of the neural network model but also significantly improves the classification accuracy than when neural network and heuristic model are used separately.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.61 no.2
• /
• pp.79-86
• /
• 2016

The late-maturing black rice cultivar Shinnongheugchal from Jeollabuk-do Agricultural Research and Extension Service was used as the plant material for estimating growth characters, quality and yield from the vegetation period to harvest age. This study was performed to select an optimum combination of nitrogen level and planting density for the maximum yield of Shinnongheugchal. The plant height, number of tillers, and SPAD index were higher when the combination of 70 hills per $3.3m^2$ and 13 kg/10 a nitrogen level was used at 30 days after transplanting. The heading date for the combination of 70 hills per $3.3m^2$ and 15 kg/10 a nitrogen level, and 80 hills per $3.3m^2$ and 15 kg/10 a nitrogen level was August 22. The heading date for the other combinations was August 21. The combination of 70 hills per $3.3m^2$ and 13 kg/10 a nitrogen level yielded the highest number of tillers at 40 days after flowering. Even though the lodging index was increased with increasing nitrogen levels, field lodging did not occur until harvest time. Seed nitrogen concentration in the combination of 70 hills per $3.3m^2$ and 13 kg/10 a nitrogen level showed a significant difference when compared with the other combinations. The black rice yield varied significantly, and the highest yield was observed in the combination of 70 hills per $3.3m^2$ and 13 kg/10 a nitrogen level. The yield was significantly correlated with seed nitrogen concentration. The maximum yield was estimated to be 14.67 kg/10 a nitrogen level by using the regression equation. On average, the coloring degree of the black rice was higher at planting density of 70 hills per $3.3m^2$ than at 80 hills per $3.3m^2$. The highest yield of perfect black rice was obtained using the combination of 70 hills per $3.3m^2$ and 13 kg/10 a nitrogen level. Our findings demonstrate that a nitrogen level of 13-14 kg/10 a can be used to obtain the maximum yield from Shinnongheugchal with yield, cyanidin 3-glucoside content, and perfect black rice yield as the standard.