• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.1
• /
• pp.67.2-67.2
• /
• 2011

Schwarzschild-Chang 망원경은 두 개의 반사경을 사용한 비축 망원경이다. 이 망원경에 사용된 비축 광학 이론을 이용하면 선형 비점수차를 완전히 제거할 수 있으며 3차 이상의 고차수차들도 동축 광학계와 동일한 정도로 최소화 시킬 수 있다. 이 망원경 디자인을 응용하면 단일 광학계 망원경을 제작할 수 있을뿐만 아니라 2개의 망원경 시스템을 조합할 경우 색수차나 중앙차폐 없이 대형 망원경의 focal reducer 또는 분광기의 내부 광학 장치로도 사용할 수 있다. 본 연구팀은 현재 구경 50 mm, 유효초점거리 100 mm, 시야각 $8{\times}8^{\circ}$ 인 Schwarzschild-Chang 망원경 시험 모델을 완성했다. 본 발표에서는 적외선 관측을 직접 할 수 있는 Schwarzschild-Chang 망원경의 개발 진행과정에 대하여 설명한다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.114-118
• /
• 2007

Design and fabrication of a 30-tonf-class full-scale regenerative cooling combustion chamber of a liquid rocket engine for a ground hot firing test are described. It has chamber pressure of 60 bar and nozzle expansion ration of 12 and manufactured to have a single welded structure of· the mixing head and the chamber. The material of the mixing head is STS316L which has excellent mechanical property in cryogenic condition. The chamber comprise of the cylinder, nozzle throat, and 1st/2nd nozzle parts. The material of the inner jacket is copper alloy/STS329J1/STS316L and that of the outer jacket is STS329J1. The components of· the combustor were manufactured by mechanical processing including lathing, milling, MCT, rolling and pressing. The machined components were integrated to a single body by means of general welding, electron beam welding(EBW), and brazing.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.782-789
• /
• 2020

The demand for the development of rolling stock technology to maintain the best performance in various climatic environments has increased to expand the overseas market of rolling stock. In this study, international and domestic standards that must be applied to build a harsh climatic environment test system were investigated and compared. The way of improvement for domestic standards is proposed. The wind velocities and temperatures are specified in the UIC, EN, and IEC standards for climatic wind tunnel, and EN 50125-1 provides the velocity test up to 180km/h, the largest wind speed. UIC and EN provide the lowest temperature of -45℃, and IEC 62498-1 provides the highest temperature 55℃. The solar radiation test was specified up to 1200W/m2 in the UIC, EN, and IEC. The IEC, EN, and KS R 9145 provide the water tightness standards, which are different from each other in water capacity, pressure, and methods. The snow test method was not well specified. KRTS-VE-Part 31 provides pressurization test methods. The airtightness standards for high-speed rolling stock are defined and regulated for internal pressure change rate in UIC 660 and 779-11. The domestic standard for the wind tunnel test was not well prepared, and the solar radiation test and snow test do not exist in Korea. Therefore, it is necessary to improve domestic standards to an international level for the climatic wind tunnel test of rolling stock.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.678-682
• /
• 2012

본 연구는 한국건설기술연구원의 주요사업인 "산지하천 유역의 홍수예측을 위한 수문조사(2011~2015년)"의 Test-bed 유역중의 하나인 설마천 유역(경기도 파주시 적성면)을 운영하면서 신뢰성 있는 수문자료를 지속적으로 획득함과 동시에 산지하천 유역의 홍수량 예측과 재해방지 설계기법을 개선하고 수문정보를 제공하는데 있다(Test-bed 유역중의 또 하나인 차탄천 유역은 2011년 수문관측 기반구축 완성). 이를 위하여 2011년에도 지속적인 수문조사를 하였으며, 수문자료의 품질 향상을 위한 관측기기의 유지관리와 수집된 자료의 처리절차를 통하여 신뢰성 있는 수문자료를 생성하고, 이들 자료를 바탕으로 유역의 수문특성을 분석하였다. 또한 홍수량 예측과 재해방지 설계기법 개선을 위해서는 관련 기술조사, 평가와 취약 설계인자를 도출하였으며, 정량화를 위한 시험 및 조사방법을 결정하는 과정을 진행하고 있다. 설마천-차탄천 수문정보시스템(http://seolmacheon.kict.re.kr)은 Test-bed 유역(설마천 유역 이외에 차탄천 유역 포함)에서 생성되는 수문자료를 수집, 저장, 공유하는 기능을 포함하고, 홍수예측 모형(집중형 모형)과 강우레이더 자료(RDAPS 자료)를 결합한 산지하천의 홍수예측을 모의할 수 있는 기능을 추가하였으며, 향후 모의의 정도를 개선하고자 다른 모형과 다른 강우레이더 자료 도입을 목표로 진행할 예정이다. 그리고 Test-bed 유역을 기반으로 한 홍수량 예측 모형의 적용성 평가를 통해 중 소규모 산지하천 유역에 적합한 실시간 홍수예보 시스템 개발과 유역 수문조사 지침서 작성을 통해 가이드를 제시하고자 한다. 2011년 설마천 유역에서 생성된 자료로는 6개 우량관측소의 우량자료, 2개 수위관측소의 하천수위 및 지하수위, 유량측정성과 등이 있으며, 이로부터 산정된 유역평균우량과 유량자료 등이 있다. 확정된 강우-유출자료를 이용하여 강우의 호우사상 분석(강우강도, 지속기간), 강우의 지속기간별 최대강우량, 강우의 시 공간 분포 특성 분석, 월별 유출 및 주요 호우사상의 유출특성 분석 등 기본적인 강우-유출 특성을 분석하였다. 그리고, 유량측정성과의 불확실도 분석을 통하여 측정한 유량자료의 정확도를 제고하였다. 설마천 유역에서 축적된 수문자료는 자료의 공유를 통하여 자료의 검증을 확보함과 동시에 연구성과가 수자원 개발 분야에 활용되기 위해서는 지속적이고 안정적인 자료확보와 수문관측 기술개발을 위한 노력과 투자가 더욱더 필요한 상황이다.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.2
• /
• pp.437-445
• /
• 1999

The purpose of this study was to evaluate the changes of laser doppler flowmeter output associated with stage of root development. Laser Doppler Flowmeter was done in 40 elementary students aged between 7 and 8 years and in 20 adults aged between 23 and 24 years. Among 40 elementary students, 20 had apical foramens with $1{\sim}2mm$ diameters and another 20 had ones with larger diameters than 2mm. The LDF values were analyzed with ANOVA and paired t-test. The results were as follows. 1. Immature root apecies group had a higher tendency than mature root apecies group in LDF values, but there was no statistical significance (p>0.05). 2. There was no statistical significance in LDF values comparing groups with immature root apecies (p>0.05). 3. There were no significant differences between right and left central incisors in LDF values (p>0.05).

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.2
• /
• pp.131-138
• /
• 2009

Analytical modal verification is considered as the process to provide an acceptable description of the subject structure's behaviour. In general, results of original analytical model are different with actual structure results to uncertainty like non-linearity of material, boundary and modified shape, etc. In this paper, the dynamic model of glider's wing is correlated with static deformation and vibration test results by goal-attainment method, multi-objects optimization technique. The structural responses are predicted by using finite element method and optimization is carried out by using the SQP(sequential quadratic programming) method which is widely used in the constrained nonlinear optimization problem. The MAC(Modal Assurance Criterion) is used to modify the mode shapes and quantify the similarity.

• Journal of the Korean Institute of Gas
• /
• v.24 no.2
• /
• pp.44-49
• /
• 2020

In this paper, a measuring circuit is designed through analyzing manufacture specification of the sensor based on MOS. And the best input-output polynomial are induced that really gas sensors are used in gas safety management industrial fields. Response characteristics of a MOS gas sensor is analysed by through sensor's output voltages are measured after standard gases with six kinds of concentrations are manufactured and are injected to the sensor. A lookup table is created by relations of sensor's output voltages by injecting gases with other concentrations. Because data of the formed lookup table are equal interval, a polynomial can be induced of method of approximation function. So the 5th polynomial of input-output for a sensor is defined, coefficients are calculated by using least squares method, and the 5th polynomial is completed for representing characteristics of the sensor. If the proposed polynomial is applied to gas leak detectors, an inverse transformation of polynomial and programing of array codes are recreated. In this research, polynomial is implemented with array types that intervals of values of a lookup table are one-fifth sampled and interpolated. The performance of proposed 5th calibration equation is verified that errors are reduced than a linear expression when tests are performed by measurement of concentrations against injection of standard gases.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.6A
• /
• pp.535-542
• /
• 2010

Precise estimation of a structure's dynamic characteristics is indispensable for ensuring stable dynamic responses during lifetime especially for the structures which can experience resonance such as railway bridges. In this paper, the results of forced vibration tests of different excitation methods (vibration exciter and impact hammer) are compared to examine the differences and the cause of differences of extracted natural frequencies. Consequently a natural frequency modification method is suggested to eliminate effects of non-structural disturbance factors. Also, sequential forced vibration tests are performed before and after track construction according to the construction stage of a railway bridge, and the variation of natural frequencies are examined. Effect of added mass of vibration exciter and variation of support condition due to the level of excitation force are concluded as the major cause of natural frequency differences. Thus eliminating these effects can enhance the reliability of the extracted natural frequencies. Construction of track affects not only the mass of structure but also the stiffness of the structure. Also, the amount of increase in stiffness varies according to the level of structural deflection. Therefore, reasonable estimation of the level of structural response during operation is important for precise natural frequency calculation at design phase.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.11 no.1
• /
• pp.1598-1603
• /
• 1969

A field expeperiment has been conducted in order to explore possibilities of efficient and economical irrigation methods for the rice cultivation through which irrigation water may be saved and rice paddies may keep water for longer period of time, resulting in an increased yield of rice. Some of the major findings from the experimentation are summarized in the following. 1. There is slightly significant difference among experimental plots in the weight of rice straw. 2. The 9cm-lined plot proves to be the best in terms of the thickness. In this connection, however, it seems to by 3cm. 3. The wheat straw-lined plot is found superior in yield. However, this may be resulted in by the application of more fertilizer, and how long the plot could be durable may be problematic. Since every two or three years the straw-lining work has to be done, more labour may be required of the plot. 4. It would be inappropriate to expect any meaningful experimental results for the first year, since surface soil and deep soil are mixed up in the course of work. There is not observed any meaningful difference in the number of ears per stalk and in the number of grains per ear. However, in the lined plots, the number of tillers is slightly increased. 5. Irrigation has been applied by means of ordinary method after lining. When irrigation is applied at the interval of five to six days, irrigation water is saved by 44.9 per cent in the case of 9cm-lined plot, 39.7 per cent in the case of 6 cm-lined plot, and 36.3 percent in the case of 3 cm-lined plot. 6. An increased yields arenoted in the wheat straw-lined plot by 23.8 per cent, in the 9 cm-lined plot by 20.1 per cent, in the 3 cm-lined plot by 12 per cent. and in the case of vinyl-lined plot by 12.5 per cent. 7. The rate of maturity of grains is proved better, and the husking rate also found better(75%), that is, the quality of rice grains is improved.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.36 no.1
• /
• pp.1-11
• /
• 2020

Purpose: The purpose was to compare shear bond strength (SBS) of three types of resin for temporary restoration to polyetherketoneketone (PEKK) depending on surface modification. Materials and Methods: Sixty disks made from PEKK were air-abraded with 110 ㎛ alumina particles (Cobra, Renfert GmbH, Hilzinge, Germany) and thirty specimens were divided into two groups each: PEKK without Visio.link (Bredent, Senden, Germany)(U) and with Visio.link (P). Resins for temporary restoration (polymethylmethacrylate; PMMA, polyethylmethacrylate; PEMA, bis-acryl composite resin) in the shape of a square with one side 3.2 mm were bonded to PEKK twenty respectively and classified into six groups (UM, UE, UC, PM, PE and PC). All specimens were stored in distilled water at 37℃ for 24 hours. SBS of each group was measured at a crosshead speed of 2 mm/min in universal testing machine. SBS was compared using one-way ANOVA and a Tukey HSD test (P = 0.05). Results: Group UM and group UE showed a significant difference in SBS with group UC (P < 0.05). Group PC showed a significant increase in SBS than group UC (P < 0.05). Conclusion: It is recommended to apply Visio.link to PEKK for adhering bis-acrylic composite resin, but not for PMMA and PEMA in clinical practice.