• Journal of Dental Rehabilitation and Applied Science
• /
• v.18 no.4
• /
• pp.321-329
• /
• 2002

Bending moments results from offset overloading of dental implant, which may cause stress concentrations to exceed the physiological capacity of cortical bone and lead to various kinds of mechanical failures. The purpose of this study was to compare the distributing pattern of stress on the finite element models with the different angulated placement of dental implant in mandibular posterior missing areas. The three kinds of finite element model, were designed according to 3 main configurations: Model 1(parallel typed placement of 2 fixtures), Model 2(15. distal angulated placement of one fixture on second molar area), Model 3(15. mesial angulated placement of one fixture on second molar area). The cemented crowns for mandibular first and second molars were made on the two fixtures (4mm 11.5). Three-dimensional finite element models by two fixtures were constructed with the components of the implant and surrounding bone. A 200N vertical static load were applied to the center of central fossa and the point 2mm apart from the center of central fossa on each model. The preprocessing, solving and postprocessing procedures were done by using FEM analysis software NISA/DISPLAY IV Version 10.0((Engineering Mechanics Research Corporation, USA). Von Mises stresses were evaluated and compared in the supporting bone, fixtures, and abutment. The results were as following : (1) Under the point loading at the central fossa, the direction of angulated fixture affected the stress pattern of implants. (2) Under the offset loading, the position of loading affected more on the stress concentration of implants compare to the angulated direction of implants. The results had a tendency to increase the stress on the supporting bone, fixture and screw under the offset loads when the placement angulation of implant fixture is placed toward mesial or distal direction. In designing of the occlusal scheme for angulated placement, placing the occlusal contacts axially during chewing appears to have advantages in a biomechanical viewpoint.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.19 no.3
• /
• pp.247-256
• /
• 2003

The patient had bruxism and epilepsy tendency. Inadequate or unstable posterior support was identified due to severe anterior attrition and decreased occlusal vertical dimension. Prematurities of posterior occlusal and wear facets increased the function of anterior teeth, resulting in severe wear. Wear facets displayed sharply defined peripheries, which are matched on articulated diagnostic casts. Also the patient showed C III malocclusion tendency, and lost some facial contour with drooping corners on the mouth. In this case, the alteration of OVD (Occlusal Vertical Dimention) may provide a biologically compatible adjunct to the treatment such as dentofacial esthetics, improved visual proportion in facial heightand mechanical solutions to the force-management of the masticatory system. The patient requires extensive restorative treatment to regain appropriate function, esthetics and comfort. According to the report by Farhad Fays, the average vertical distance from the maxillary to the mandibular mucolabial reflection in the region of the central incisors is approximately 34mm. However, the vertical distance of this patient was found to be 32mm, which was necessary to add gauge 20-sheets to apply vertical dimension. A removable occlusal overlay splint, which restores OVD to the estimated optimalposition, is the general first trial. The patient was observed periodically for 6 weeks, while appropriate adjustments were made vertical dimension to function. When patient felt comfortable with the splint, the teeth were prepared, and provisional restorations are placed for 3 months. The provisional restoration was fabricated by a diagnostic wax-up. When the patient felt comfortable with the provisional restoration, the final restoration mimics OVD, function, and esthetics that have been developed in the treatment restorations. Restoration of the extremely worn dentition presents a substantial challenge to thedentists. Therefore, careful evaluation of the etiology, history, and factors associated with occlusal vertical dimension should be preceded prior to the appropriate treatment planning.

• Korean Journal of Medicinal Crop Science
• /
• v.28 no.6
• /
• pp.471-480
• /
• 2020

Background: The roots of Cirsium japonicum var. ussuriense (RCJ) have been used as traditional medicine in Korea for hematuria and hematemesis. These extracts exert anti-oxidative and anti-inflammatory effects by scavenging for free radical and regulating the inflammatory response. However, the effect of RCJ on rheumatoid arthritis (RA) has not been elucidated. Thus, we evaluated the water extract of RCJ (WRCJ) using type II collagen-induced RA models. Methods and Results: RA was induced by immunization with type II collagen. All experimental materials were orally administered daily for three weeks. The positive control group was administered with 0.2 mg/kg methotrexate (n = 7), while the experimental group was administered with WRCJ (100 or 500 mg/kg, n = 7). Serum levels of TNF-alpha, Interleukin 6 (IL-6), and type II collagen IgG (CII) were measured using ELISA. Administration of 500 mg/kg WRCJ decreased the levels of TNF-alpha, IL-6, and CII. Moreover, WRCJ treatment diminished swelling of hind legs and infiltration of inflammatory cells in RA models' synovial membrane. Conclusions: These results indicate that WRCJ could improve RA, reduce inflammatory indicators and synovial inflammation. However, further experiments are required to determine how WRCJ can influence the signal transduction pathway in RA.

• Journal of the Korean Orthopaedic Association
• /
• v.56 no.6
• /
• pp.461-471
• /
• 2021

Kienböck's disease is known as avascular necrosis of the lunar bone, but its natural course or optimal treatment in various stages has not been identified clearly. The textbook divides the progression of the disease and suggests treatment methods according to the stages, but it is unclear if conforming to the principle without sufficient verification is the correct treatment method. While diagnosing and treating many Kienböck's diseases, the author has had many questions regarding the treatment choices described in the textbook and tried to establish an optimal treatment based on data evidence and experience. This review presents the most appropriate and reasonable treatment method while questioning whether the previous knowledge is based on an accurate basis.

• Physical Therapy Korea
• /
• v.29 no.1
• /
• pp.70-78
• /
• 2022

Background: Individuals with calf muscle shortening may have decreased dynamic balance. Objects: This study aimed to investigate the effect of mobilization with movement (MWM) and myofascial release (MFR) on kinematic changes in dynamic balance in individuals with calf muscle shortening. Methods: Thirteen participants were randomly assigned to the MWM or the mobilization with movement added myofascial release (MWM-MFR) group. The MWM group received treatment with only MWM, whereas the MWM-MFR group was treated with MWM and MFR. Pre- and post-intervention passive range of motion (PROM), maximum reaching lengths, and modified star excursion balance test (MSEBT) results were compared for all participants. Wilcoxon signed-rank test and Mann-Whitney U test were used for statistical analysis. Results: The results showed significant within-group differences in ankle PROM, but no significant between-group differences. The maximum reaching length in the MWM-MFR group in the posterolateral direction was significantly different before and after the intervention (p = 0.005). This group also showed significantly reduced ankle abduction in MSEBT during the posteromedial direction section 3 (p = 0.007) and posterolateral direction section 5 (p = 0.049) compared with the MWM group. Conclusion: Combined MWM and MFR intervention improves ankle stability in the coronal plane during the posteromedial and posterolateral forward movement in dynamic balance compared with only MWM in individuals with calf shortening.

• Korean Journal of Applied Biomechanics
• /
• v.34 no.2
• /
• pp.53-62
• /
• 2024

Objective: The purpose of this study was to analyze the differences in kinematic factors according to stretching treatment, myofascial release treatment, and static stretching treatment conditions during squat. Method: Twelve males with resistance training experience participated in this study. Participants performed squats without treatment (Pre-Test), and performed squats after treatment with the myofascial release technique (MRT) and static stretching (SS) on different days (post-test). Squat movements were captured using eight motion capture cameras (sampling rate: 250 Hz), and the peak joint angles of the ankle, knee, hip, and pelvis were calculated for each direction. One-way repeated ANOVA and Bonferroni post hoc analyses using SPSS 27 (IBM Corp. Armonk NY, USA) were used to compare the peak joint angle of the lower extremity joints and pelvis among the normal condition (squat without treatment), MRT condition (squat after MRT treatment) and SS condition (squat after static stretching). The statistical significance level was set at .05. Results: It was observed that the maximum ankle joint flexion angle during squats was statistically reduced under conditions of myofascial release and static stretching (p<.05), in comparison to the scenario where no stretching was performed. Furthermore, static stretching was found to enhance the maximum hip flexion angle during squat (p<.05), whereas the myofascial release stretching technique resulted in the minimal posterior pelvic tilt angle (p<.05). Conclusion: Employing myofascial release stretching as a preparatory exercise proved to be more efficacious in maintaining body stability throughout the execution of high-intensity squat movements by effectively managing the posterior tilt of the pelvis, as opposed to foregoing stretching or engaging in static stretching.

• Korean Journal of Applied Biomechanics
• /
• v.12 no.2
• /
• pp.159-177
• /
• 2002

The purpose of this study was to investigate the relations between the segments of the body, the three dimensional anatomical angle and the angular velocity of the air born phase and understand the control mechanism of the high-bar movement, the somersault, the double somersault, the double somersault with full twist. For this study seven well trained university gymnastic volunteered, Zatsiorky and Seluyanov(1983, 1985)'s sixteen segment system anatomical model was used for this study. For the movement analysis three dimensional cinematographical method(Arial Performance Analysis System : APAS) was used and for the calculation of the kinematic variables a self developed program was used with the LabVIEW 5.1 graphical profromming(Johnson, 1999) program. By using Eular's equations the three dimensional anatomical Cardan angles of the joint and angular velocity were defined. As a result of this study 1. As the rotation of the body increased in the air born phase the projection angle of the CM of the total increased, this resulted the increased of the max hight of the CM. 2. In three dimensional angular velocity the Z axis(vertical direction) projection angular velocity increased as the rotation of the body increased in the airborn phase, but the Y axis and the X axis projection angular velocity did not show significant differences. 3. As the rotation of the body increased in the air born phase the angular movement of the shoulder and the hip showed significant change. These movement act as the starter in the preparation phase. 4. The somersault angle, the twist angle, the tilt angle of the upper body related to the global reference frame in the releas phase the average somersault angle of the three types of high-bar movement was $57.7^{\circ}$, $38.8^{\circ}$, $39.7^{\circ}$, the average tilt angle was $-1.5^{\circ}$, $-5.4^{\circ}$, $-8.4^{\circ}$, the average twist angle was $13.4^{\circ}$, $10.6^{\circ}$, $23.3^{\circ}$. This result showed that the somersault with full twist had the largest movement.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.17 no.4
• /
• pp.245-256
• /
• 2001

The purpose of this study is to analyze the mechanical stress and displacement on the jaws during the simulated bilateral clenching task on the three-dimensional finite element model of the dentated skull with unilateral molar loss. For this study, the computed tomography(G.E.8800 Quick, USA) was used to scan the total length of human skull in the frontal plane at 2.0mm intervals. The fully assembled finite element model consists of the articular disc, maxilla, mandible, teeth, periodontal ligament and cranium. The FE model was used to simulate the bilateral clenching in intercuspal position. The loading condition was the force of the masseter muscle exerted on the mandible as reported by Korioth et al. degrees of freedom of the zygomatic region where the masseter muscle is attached were fixed as restraints. In order to reflect the actual action of the muscles force, the displacement of the region was attached where the muscle is connected to the temporal bone and restraint conditions were given values identical to values at the attachment region of the masticatory muscle but with the opposite direction of the reaction from when the muscle force is acted on the mandible. Although the mandible generally has higher displacement and von Mises stress than the maxilla, its mandibular corpus on the molar-loss side has a higher stress and displacement than the molar-presence side. Because the displacement and von Mises Stress was the highest on the lateral surface of mandibular corpus with molar loss, the stress level of the condyle on the molar-loss side is greater than that of the molar-presence side, which in turn caused the symphysis of the mandible to bend. In conclusion, the unilateral posterior bite collapse with molar loss under para-functional activities such as bruxism and clenching can affect the stress concentration on the condyle and mandibular corpus. It is therefore necessary to consider the biomechanical function of dento-skeleton under masticatory force while designing the occlusal scheme of restoration on alveolar bone with the posterior collapse.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.21 no.2
• /
• pp.153-167
• /
• 2005

The purpose of this study was to compare the v-shape thread with the square shape thread of fixture in the view of stress distribution pattern using finite element stress analysis. The finite element model was designed with the parallel placement of two standard fixtures(4.0 mm diameter ${\times}$ 11.5 mm length) on the region of mandibular 1st and 2nd molars. Three dimensional finite element model was created with the components of the implant and surrounding bone. This study simulated loads of 200 N at the central fossa in a axial direction (load A), 200 N at the buccal offset load that is 2 mm apart from central fossa in a axial direction (load B), 200 N at the buccal offset load that was 4 mm apart from central fossa in a axial direction (load C). These forces of load A',B',C' were applied to a $15^{\circ}$ inward oblique direction at that same site with 200 N. Von Mises stress values were recorded and compared in the supporting bone, fixture, and abutment screw. The following results have been made based on this study : 1. The highest stress concentration occurred at the cervical region of the implant fixture. 2. Von Mises stress value of off-site region was higher than that of central fossa region. 3. Square shape thread type showed more even stress distribution in the vertical and oblique force than V-shape thread type. 4. Stress distribution was the most effective in the case of buccal offset load (2, 4 mm distance from central fossa) in the square shape thread type. 5. V-shape thread type revealed higher von Mises stress value than square shape thread type in all environmental condition. The results from numerical analyses concluded that square shape thread type had the lower destructive stress and more stress distribution between the fixture and bone interface than V-shape thread type. Therefore, square shape thread type was regarded as optimal thread configuration in biomechanical concepts.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.21 no.2
• /
• pp.169-182
• /
• 2005

The purpose of this study was to compare the stress distribution around the surrounding bone according to the splinted and non-splinted conditions on the finite element models of the two implant crowns with the different vertical bone level. The finite element model was designed with the parallel placement of the two fixtures ($4.0mm{\times}11.5mm$) with reverse buttress thread on the mandibular 1st and 2nd molars. As the bone quality, the inner cancellous bone and the outer 2 mm cortical bone were designed, and the cortical and cancellous bone were assumed to be perfectly bonded to the implant fixture. The splinted model(Model 1) had 2 mm contact surface and the non-splinted model(Model 2) had $8{\mu}m$ gap between two implant crowns. Two group (Splinted and non-splinted) was loaded with 200 N magnitude in the vertical and oblique directions on the loading point position on the central position of the crown, the 2 mm and 4 mm buccal offset point from the central position. Von Mises stress value was recorded and compared in the fixture-bone interface in the bucco-lingual and mesio-distal sections. The results were as follows; 1. In the vertical loading condition of central position, the stress was distributed on the cortical bone and the cancellous bone around the thread of the fixture in the splinted and non-splinted models. In the oblique loading condition, the stress was concentrated toward the cortical bone of the fixture neck, and the neck portion of 2nd molar in the non-splinted model was concentrated higher than that of 1st molar compared to the splinted model. 2. In the 2 mm buccal offset position of the vertical loading compared to the central vertical loading, stress pattern was shifted from apical third portion of the fixture to upper third portion of that. In the oblique loading condition, the stress was distributed over the fixture-bone interface. 3. In the 4 mm buccal offset position of the vertical loading, stress pattern was concentrated on the cortical bone around the buccal side of the fixture thread and shifted from apical third portion of the fixture to upper third portion of that in the splinted and non-splinted models. In the oblique loading, stresses pattern was distributed to the outer position of the neck portion of the fixture thread on the mesio-distal section in the splinted and non-splinted models. Above the results, it was concluded that the direction of loading condition was a key factor to effect the pattern and magnitude of stress over the surrounding bone of the fixture under the vertical and oblique loading conditions, although the type with or without proximal contact did not effect to the stress distribution.