• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.11
• /
• pp.1135-1140
• /
• 2012

Two-step metallization processes have been proposed to achieve high-efficiency silicon solar cells, where the front-side grids are formed by silver plating after the formation of a nickel seed layer with a mask. Because the conventional mask patterning process is performed by an expensive selective printing method using either UV resist or phase change ink, however, the combination of a simple coating and laser-selective ablation processes is proposed in this study as an alternative means. As a masking material, the solar cell wafer was coated with either inexpensive wax having a low melting temperature or a fluorocarbon solution, and then, an electrode image was patterned by selectively removing the masking material using the laser. It was found that the fluorocarbon coating was not only superior to the wax coating in terms of pattern uniformity but it also increased the efficiency of the solar cell by 0.16%, as confirmed by statistical f and t tests.

• Food Science and Preservation
• /
• v.10 no.1
• /
• pp.1-5
• /
• 2003

This study was carried out to extend a marketing shelf-life of the Jeju greenhouse mandarin fruits. Total soluble solids were not showed any significant differences by the temperatures and pre-treatments during the marketing period. Acid content and firmness of the fruits were gradually decreased, which were better in cold than in room temperature treatment. The fruits washed in electrolyzed acid water(pH 2.4∼2.7) maintained freshness higher than those of control Internal CO$_2$concentration of those was 1.0 ％ more or less in the beginning marketing stage, but increased along the marketing period in mom temperature. Especially Internal CO$_2$concentration of wax-coated fruits rapidly increased more than any other, whereas it was a little decreased in cold treatment. After 10 days in room temperature, decay ratio of the fruits was below 4.0% in electrolyzed acid water washing, compared to 10.4% in control. After 30 days in cold temperature, decay ratio was only 3.7% in electrolyzed acid water washing compared to 4.4% of wax-coated treatment and 7.4% of control. The weight loss among the pre-treatments in room temperature had no significant differences and was higher than in cold one.

• Korean Journal of Plant Resources
• /
• v.30 no.1
• /
• pp.29-37
• /
• 2017

The effect of packaging materials on the quality and physiological activity of Angelica acutiloba leaves during storage at $4^{\circ}C$ for 20 days and after being transferred to room temperature for 2 days was studied. The experiment was conducted using three packaging materials: the corrugated box (control); corrugated box with $20{\mu}m$ HDPE perforated film liner; and corrugated box with paraffin wax coated paper $+20{\mu}m$ HDPE perforated film liner. Changes in weight, color, aroma, overall visual quality, antioxidant activity, and total flavonoids were investigated. Based on the result, the treatments using corrugated box with $20{\mu}m$ HDPE perforated film liner and the corrugated box with paraffin wax coated paper $+20{\mu}m$ HDPE perforated film liner, were effective in minimizing weight loss, and maintaining external color and overall quality as compared to corrugated box only (control). The corrugated box with paraffin wax coated paper $+20{\mu}m$ HDPE perforated film liner was more effective in maintaining antioxidant activity and total flavonoids than other treatments. Prolonging the freshness using corrugated box with paraffin wax coated paper $+20{\mu}m$ HDPE perforated film liner could increase the marketability of Angelica acutiloba leaves in the domestic market.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.6
• /
• pp.146-151
• /
• 2011

Wax spin coating is a part of several wafer handling processes in the silicon wafer polishing station. It is important to ensure the wax layer free of contamination to achieve the high degree of planarization on wafers after wafer polishing. Three-dimensional air flow characteristics in a wax spin coater are numerically investigated using computational fluid dynamics techniques. When the bottom of the wax spin coater is closed, there exists a significant recirculation zone over the rotating ceramic block. This recirculation zone can be the source of wax layer contamination at any rotational speed and should be avoided to maintain high wafer polishing quality. Thus, four air suction ducts are installed at the bottom of the wax spin coater in order to control the air flow pattern over the ceramic block. Present computational results show that the air suction from the bottom is quite an effective method to remove or minimize the recirculation zone over the ceramic block and the wax coating layer.

• Food Science and Industry
• /
• v.50 no.2
• /
• pp.37-51
• /
• 2017

Food packaging strategies have steadily improved with increasing demand for improved food safety, convenience, and shelf life. The development of edible film has been hailed as a technology substituting packaging using synthetic plastics. There has been a surge for research to develop antimicrobial edible films and coatings that can increase microbiological safety while preserving foods. This review addresses recent results that are useful in advancing and extending research into antimicrobial edible films. In this review, we suggest the trend of the development of antimicrobial edible film/coatings by outlining edible film materials, antimicrobial substances, antimicrobial and physical properties of the films, commercial antimicrobial edible films, and methods to statistically predict the efficacy of antimicrobial edible film/coatings, reported in recent studies.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.11a
• /
• pp.185-185
• /
• 2012

최근 자연모사를 이용한 연구가 다양한 분야에 적용되고 있다. 특히 연 잎의 표면에서 나타나는 초발수 특성이 마이크로 나노 크기의 구조와 표면에너지를 제어하는 에피큐티클 왁스에 기인하다는 것이 밝혀지면서 이를 응용한 연구가 진행되고 있다. 본 연구는 알루미늄 표면처리로 마이크로와 나노 구조물을 형성하고 그 위에 발수 특성을 가진 물질을 증착하여, 발수성을 가지는 표면을 개발하였다. 알루미늄 표면에 마이크로 크기의 알루미나($Al_2O_3$) 분말을 이용한 블라스트(blast) 공정으로 표면에 마이크로 구조를 형성하고, Linear Ion Source(LIS)를 적용한 Ar 이온빔 에칭으로 나노 구조를 형성하였다. FE-SEM 분석을 통해 수~수십 마이크로 구조 위에 나노 크기의 구조가 형성 된 것을 관찰하였다. 마이크로 나노 구조가 형성된 알루미늄의 표면에너지를 낮추기 위해 trimethylsilane(TMS) 및 Ar을 이용한 플라즈마처리로 표면에 기능성 코팅막을 형성하였다. 그 결과 TMS 발수 코팅하기 전에 비해 표면에너지가 $99.75mJ/m^2$에서 $9.05mJ/m^2$으로 급격히 낮아지고 접촉각 값이 $123^{\circ}$로 향상된 것을 확인하였다.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.3_1spc
• /
• pp.531-536
• /
• 2013

An automatic wax-ring manufacturing system for silk coating was developed, which consisted of a container, pallet with a cooling part, injection port, and removing device. The removing device is a system to load, lift, and cut the wax-ring, which is widelyused for various silk-coating industrial purposes. A novel removing device equipped with a water cooling circulation system is proposed in this paper. It has the benefit of easy control, as well as the convenience of loading and unloading without the use of other equipment. Three-dimensional modeling techniques were adopted to develop integrated functions for the automatic wax-ring manufacturing system, which made it possible to confirm the smooth integration/interface of each part and the system's interrelations with other manufacturing systems.

• Journal of Conservation Science
• /
• v.33 no.2
• /
• pp.121-130
• /
• 2017

The currently used wax agents for preserving outdoor metal structures, despite their advantages, have disadvantages such as low endurance and reliability. These wax agents are easily damaged by acid rain, dust, moisture in the air, yellow dust, and air pollutants, resulting in corrosion within a short period after the initial conservation treatment. In addition, aged wax can also exhibit changes in the color or gloss, and also give a sense of difference in the surface. Given these existing problems, it is necessary to develop improved materials for metal preservation. Therefore, this study analyzed the characteristics and applications of the existing wax coating agents in order to identify their disadvantages and to develop a better material for metal preservation. In this regard, this study developed a perilla oil based compound wax and conducted experiments to test its endurance. The new compound wax agent was exposed to outdoor and acid rain conditions: it showed four times and 1.5 times the endurance of the existing wax agents in outdoor and acid rain conditions, respectively. In addition, the new agent seems to be more durable and protective as evidenced by the chromaticity, polish maintenance, and contact angle results. Further, although it is 1.3-1.8 times thicker than the existing agents, the new agent shows a more even surface. Based on these findings, it can be concluded that the new compound wax agent based on perilla oil is a better alternative to the existing was coating agents.

• Polymer(Korea)
• /
• v.38 no.1
• /
• pp.1-8
• /
• 2014

The effects of surface color and morphology on the mar behaviors of urethane-acrylate coated surfaces were examined. The superiority of mar resistance was observed in the order of white, red and black-colored samples. This can be explained by a contrast effect. In other words, in case of black colored sample, it takes place the defuse reflection of the incident light on the damaged region where mar damage exerts, leading to whitening phenomenon. Therefore, the damaged region is easily recognized by contrasting the black background. On the other hand, it is difficult for the white-colored sample to perceive the mar-damaged area by the white background acting as protecting coloration. As the gloss of urethane-acrylate coated surface increases, it is observed that there is an increase in the number of carbonyl (-C=O) function group, amount of ethylene and silica. The enhancements of surface rigidity by adding the silica particles and formation of carbonyl function groups by the surface oxidation lead to the increase in mar resistance, while the increase of polyethylene wax is responsible for the improved gloss and smooth-faced surface. Based on the above findings, technical approaches leading the improvement of mar resistance of the urethane-acrylate coated surface are discussed.

• Journal of the Korean Society of Safety
• /
• v.34 no.4
• /
• pp.1-5
• /
• 2019

In the field of combined cycle power generation, thermal barrier coating(TBC) protects the super-heat-resistant alloy, which forms the core component of the gas turbine, from high temperature exposure. As the turbine inlet temperature(TIT) increases, TBC is more important and durability performance is also important when considering maintenance cost and safety. Therefore, studies have been made on the fabrication method of TBC and super-heat-resistant alloy in order to improve the performance of the TBC. In recent years, due to excellent properties such as high temperature creep resistance and high temperature strength, turbine blade material have been replaced by a single crystal superalloy, however there is a lack of research on TBC applied to single crystal superalloy. In this study, to understand the isothermal degradation performance of the TBC applied to the single crystal superalloy, isothermal exposure test was conducted at various temperature to derive the delamination life. The growth curve of thermally grown oxide(TGO) layer was predicted to evaluate the isothermal degradation performance. Also, microstructural analysis was performed by scanning electron microscope(SEM) and energy dispersive X-ray spectroscopy (EDS) to determine the effect of mixed oxide formation on the delamination life.