• Environmental and Resource Economics Review
• /
• v.20 no.2
• /
• pp.229-254
• /
• 2011

In this paper, we decomposed Greenhouse-Gas emissions of Korea's manufacturing industry using LMDI (Log Mean Divisia Index) method. Changes in $CO_2$ emissions from 1991 to 2007 studied in 5 different factors, industrial production (production effect), industry production mix (structure effect), sectoral energy intensity (intensity effect), sectoral energy mix (energy-mix effect), and $CO_2$ emission factors (emission-factor effect). By results, the structure effect and intensity effect has a role of reducing GHG emissions and The role of structure effect was bigger than intensity effect. The energy mix effect increased GHG emissions and emission-factor effect decreased GHG emissions. By time series analysis, IMF regime affected the GHG emission pattern. the structure effect and intensity effect in that regime was getting worse. After 2000, in the high oil price period, the structure effect and intensity effect is getting better.

• Bulletin of Korea Environmental Preservation Association
• /
• s.418
• /
• pp.16-18
• /
• 2015

온실가스 감축목표의 달성을 위한 정책은 에너지 가격구조의 개선을 통해 국가 경제의 탄소 집약도를 낮추고 에너지 효율을 제고하는 방향으로 추진되어야 할 것이다. 우리나라는 대규모 배출권에 대하여 배출권 거래제를 시행하고 있으므로, 이를 보완하는 차원에서 배출권 거래제의 적용을 받지 않는 배출원에 대하여 탄소세를 부과하는 정책을 추진할 필요가 있다. 온실가스 감축을 위한 규제(탄소세, 배출권 거래제 등)는 기존세제 구조의 왜곡을 해소하거나 교역조건 개선 효과가 클 경우 경제성장에도 긍정적 영향을 미칠 수 있다.

• Journal of Korea Water Resources Association
• /
• v.45 no.12
• /
• pp.1201-1211
• /
• 2012

This paper constructed the single country sequential dynamic CGE model to analyze the economic impacts of subsidizing water industry under the GHG emission abatement policy in Korea. We introduced the carbon tax to reduce the GHG emission and made two scenarios. One is to transfer the total tax revenue to household. The other is to mix the tax transfer and water industry support. Our Simulation results show that the macroeconomic effects might be positive by subsidizing water industry compared with the pure tax transfer. However, the support of water industry doesn't contribute to head for the non-energy intensive economy because it's economic activity highly depend on fossil energy and energy intensive products as intermediate demand. This means that it is important to make efforts on the cost effective measures such as energy technology progress, alternative energy development, and energy efficiency improvement in water industry against climate change policy.

• Journal of Climate Change Research
• /
• v.4 no.4
• /
• pp.349-358
• /
• 2013

In this study, the newest technology available to reduce GHG emissions, which can be applicable in energy industries of the future that has large reduction obligations by energy target management and large intensity of GHG emissions, has been investigated by searching the technical characteristics of each technology. The newest technology to reduce GHG emissions in the field of power generation and energy can be mainly classified into the improvement of efficiency, CCS, and gas combined-cycle technology. In order to improve the reliability of the GHG emission factor obtained from the investigation process, it has been compared to the technology-specific GHG emission factor derived from the estimated amount of emissions. Then the GHG abatement measures, using the derived estimation of factor, by using the newest technology to reduce GHG emissions have been predicted. As a result, the GHG reduction rate by technology of CCS development has been expected to be the largest more than 30%, and the abatement rate by technology of coal gasified fuel cell and pressurized fluidized-bed thermal power generation has been showed more than 20%. If the effective introduction of the newest technology and the study of its characteristics is continued, and properly applied for future GHG emissions, it can be prospected that the national GHG reduction targets can be achieved in cost-efficient way.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2021.11a
• /
• pp.201-202
• /
• 2021

Regulations on greenhouse gases emitted from ships in international shipping are being strengthened, and the greenhouse gas reduction target established by the International Maritime Organization is acting as a great challenge for shipping companies in terms of technical and operational aspects. The International Maritime Organization aims to reduce carbon intensity by 30% by 2030, 70% by 2050, and by 50% in terms of gross emissions compared to 2008. To realize this situation, the IMO adopted some short-term and mid-to-long-term measures and adopted technical measures such as the application of EEXI, an energy efficiency index, to existing ships from 2023, and the early application of EEDI phase 3 for some tpe of ships. In addition, reduction measures were introduced to reduce greenhouse gas in the operational aspect.

• Journal of the Society of Naval Architects of Korea
• /
• v.61 no.2
• /
• pp.88-97
• /
• 2024

This study performed the analysis on an economic feasibility of each marine fuel, potential fuel pathways and the relevance of compliance measures to ensure compliance with the FuelEU Maritime regulation. Additionally, it identified certain regulatory gaps to encourage the use of alternative marine fuels. Regarding GHG emissions calculations, the existing GHG regulations for ships applies the Tank-to-Wake (TtW) method, whereas FuelEU Maritime applies the Well-to-Wake (WtW) method. The main results present that important information to establish response strategy for FuelEU Maritime including the costs and benefits of each marine fuel, the minimum blending ratio of alternative fules, and compliance impacts of measures. For the regulatory costs and benefits of marine fuels following the implementation of the FuelEU Maritime from 2025, our findings indicate that while most fossil fuels incur regulatory costs from 2025, most of biofuels and RFNBO fuels do not incur costs until 2050. This will play a role to narrow the price gap between fossil fuels and alternative fuels.

• Journal of the Korean Society for Railway
• /
• v.14 no.5
• /
• pp.425-432
• /
• 2011

Concrete was identified as the significant GHG emission source resulting from a GHG emission analysis of railway infrastructure. An environmental assessment method (life cycle assessment; LCA) and low carbon railway infrastructure design strategy development method (ECODESISGN PILOT) were applied to develop low carbon railway infrastructure design strategies. The railway infrastructure was analyzed as a raw material intensive industry emitting large amount of greenhouse gas (GHG) at its construction stage. Therefore, in this study, it is analyzed that current status of GHG emission at its construction stage, and a method reducing GHG emission of railway infrastructure is proposed. In this study, eco-concrete, concrete aging prevention agent and a low carbon railway route decision method based on a need of low carbon railway infrastructure construction technology application for green railway development were considered.

• Applied Chemistry for Engineering
• /
• v.19 no.1
• /
• pp.17-26
• /
• 2008

With the effectuation of Kyoto Protocol on the United Nations Framework Convention on the Climate Change, the emission reduction of greenhouse gases became an urgent issue and has been competitively secured among countries as the form of certificates through clean development mechanism (CDM) or joint implementation (JI). Nitrous oxide ($N_2O$) is one of the major greenhouse gases along with carbon dioxide ($CO_2$) and methane ($CH_4$) having warming potential 310 times that of carbon dioxide and chemically very stable in the atmosphere to give a life time of more than 120 years so that it reaches to the stratosphere to act as an ozone depleting substance. $N_2O$ hardly decomposes and thus, besides to the adoption of thermal decomposition at high temperature, selective catalytic reduction methods are usually used at temperatures over $400^{\circ}C$ in which the presence of NOx acts as a major impeding material in the decomposition process. In this article, the sources of various $N_2O$ generation, catalytic reduction processes and the status and trends of emission trade with CDM projects for greenhouse gas reduction are summarized and discussed on a condensed basis.

• Journal of Energy Engineering
• /
• v.1 no.1
• /
• pp.49-52
• /
• 1992

전 세계적으로 사용되고 있는 에너지의 90% 정도가 화석 연료로서 현재의 에너지 사용추세로 보아 21세기초에는 석유와 천연가스가 고갈되고 이후 예측되는 석탄의 가속적인 이용을 감안하면 석탄에너지 자원도 21세기를 넘기기 어려울 것으로 전망된다. 이에 대처하기 위하여 화석연료 대체에너지자원 및 기술개발이 활발히 진행되고는 있으나 핵연료비가 발전원가에 차지하는 비용이 낮고(15%, 석유 약 57%, 석탄 약 60%) 기술집약형으로 복합기술의 파급효과, 그리고 산성비 온실효과 등의 환경오염을 유발하지 않는 청정에너지라는 점에서 현재로는 원자력이 에너지 문제 해결을 위한 대안이라고 하겠다. (중략)

• Environmental and Resource Economics Review
• /
• v.31 no.4
• /
• pp.825-848
• /
• 2022

This paper analyzed the factors for increasing energy consumption in the domestic manufacturing sector using the LMDI (Log mean division index) decomposition method for the period from 1999 to 2019. Among the LMDI decomposition analysis methods, both additive and multiplicative factor decomposition methods were used. in this analysis. According to the result of the analysis, the factor that increased energy consumption in the domestic manufacturing industry was the production effect, and the structure effect and intensity effect were found to be the factors that decreased energy consumption. In particular, the reduction of energy consumption due to the structure effect was greater than that of energy consumption effect due to the intensity effect. By period, it can be seen that energy consumption increased rapidly due to the production effect until 2011, but after that, the increase in energy consumption due to the production effect slowed down. On the other hand, after that, the energy reduction effect due to the structure effect and the intensity effect became prominent. In order to save energy in the manufacturing sector in the future, energy diagnosis and management through EMS (Energy management system) and FEMS (Factory energy management system) are more necessary. In addition, restructuring into a low-energy consumption industry seems more necessary.