• The Journal of the Acoustical Society of Korea
• /
• v.20 no.6
• /
• pp.66-74
• /
• 2001

The temperature measurement of yen high temperature core melt is of importance in LAVA (Lower-plenum Arrested Vessel Attack) experiment in which gap formation between core melt and the reactor lower head, and the effect of the gap on thermal behavior are to be measured. The delay time of ultrasonic wavelets due to high temperature is suggested. As a first stage, a molten material temperature was measured up to 2300℃. Also, the optimization design of the ultrasonic temperature sensor with persistence at the high temperature was suggested in this paper. And the utilization of the theory suggested in the reference〔1〕and the efficiency of the developed system are certified by performing experiments. This sensor welded magnetostrictive element and tungsten element will be able to measure a temperature range of 3000℃ hereafter.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.2048-2049
• /
• 2007

광섬유 온도센서를 이용하여 밀폐형 폐쇄배전반 내부에 설치된 진공차단기(Vacuum Circuit Breaker: 이하 VCB)의 접촉부 및 부싱부 이상 온도변화를 상시 감시할 수 있는 On-line 온도 감시 시스템을 개발하였다. 본 시스템은 온도변화를 측정하는 광센서부, 광신호의 이동 통로역할을 하는 Optical Head부, 변환된 전기신호를 신호처리하고 상위 시스템으로 통신을 수행할 신호처리장치의 세 부분으로 구성되어 있다. 구현한 시스템은 측정 범위가 $-25\;{\sim}\;200^{\circ}C$인 희토류 원소가 첨가된 광섬유 온도센서를 사용하였고, 시스템의 측정 범위는 $-20\;{\sim}\;150^{\circ}C$, 측정 정밀도는 Full Scale의 ${\pm}2\;%$, 측정 주파수는 0.1 Hz이었다. 검출된 온도 값은 Modbus Protocol을 이용하여 상위 시스템으로 송신하도록 구현하였다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.4
• /
• pp.725-734
• /
• 2021

To prevent tire accidents, we developed an application that can check tire safety using the app-inventor and the bluetooth communication. The temperature sensor measures ambient temperature, the pressure sensor measures tire pressure, the laser sensor has a distance of more than 50mm, and an angle of 45° to measure for the optimal tire. We have developed an application that determines tire condition based on measured wear and tear levels, works through the Bluetooth module via App Inventor, and identifies tire condition and expected replacement condition on the user's mobile phone.

• Journal of the Korea Convergence Society
• /
• v.10 no.12
• /
• pp.293-298
• /
• 2019

The global market for temperature sensors for power plants is estimated at around 35 billion won, of which South Korea relies on imported products for more than 95 percent. This study is that a temperature measurement device for gas turbine rotators for power plants and can be applied to more than 800 of 100 MW gas turbine generators operating in Korea. This study has improved durability by changing the shape of the measuring part, structure of the connecting part, and material changes, and is a component technology applicable to other measuring devices such as humidity, gas and hydraulic pressure used in precision chemical process and plant export industry. As a result of this study, temperature sensors designed as three types of sensors for measuring the temperature of the gas turbine for power plants met Class 1 temperature accuracy in the range of 0℃ to 300℃, and improved durability significantly compared to similar products.

• Journal of Korea Society of Industrial Information Systems
• /
• v.14 no.2
• /
• pp.51-58
• /
• 2009

In this paper, a system which uses Bluetooth and Zigbee wireless communication and mobile device is designed. The temperature within vehicle and the distance betweeen the vehicle and the obstacle is measured by ultrasonic sensor system. The measured data is sent to the mobile PDA and displayed to assist safe driving.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.188.2-188.2
• /
• 2012

인공위성의 성능을 최대화 하고 긴 운용 수명을 확보하기 위해 부품들의 온도를 특정 범위로 유지 시키는 것은 매우 중요며 이를 위한 온도 모니터링 시스템은 필수적이다. 온도 모니터링 방법은 온도에 따라 저항이 변하는 Thermistor를 이용하는 방법과 출력 전류가 변하는 반도체 센서(AD590)를 이용하는 방법으로 나눌 수 있다. Thermistor의 경우 매우 정밀하게 온도를 모니터링 할 수 있지만 넓은 측정 범위에 대해서는 비선형성 가진다는 단점을 가진다. 이에 반해 반도체 센서의 경우 오차가 크지만 넓은 측정 범위에 대해서도 선형성을 가진다는 장점을 가진다. 본 논문에서는 특정 구간에 대해서 정밀한 온도 모니터링이 필요한 곳에 적용되는 Thermistor를 이용한 온도 모니터링 시스템의 측정 Mechanism에 대해서 고찰한다. 측정 Mechanism의 고찰은 온도에 따른 이산화 된 출력을 내주기 위해 사용되는 Thermistor, Current Source, A/D Converter 등의 하드웨어 적인 부분뿐만 아니라 출력된 값을 이용해 물리적인 온도로 변환시키는데 사용되는 Gain Offset, Calibration Curve 등의 소프트웨어 적인 부분도 포함한다. 또한 하드웨어와 소프트웨어적인 설계 변수를 조절함으로서 온도 모니터링 시스템의 측정범위를 개선하는 방안에 대해 고찰한다. 이렇게 본 논문에서 고찰한 Thermistor를 이용한 저궤도 위성용 온도 모니터링 시스템의 측정범위 개선 방안은 추후 인공위성에 적용되는 온도 모니터링 시스템의 설계에 Design Guide Line을 제시할 것이라고 판단한다.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.5
• /
• pp.13-25
• /
• 2012

Ground anchor method is one of the most popular reinforcing technology for slope in Korea. For the health monitoring of slope which is reinforced by permanent anchor for a long period, monitoring of the tension force of ground anchor is very important. However, since electromechanical sensors such as strain gauge and V/W type load cell are also subject to long-term risk as well as suffering from noise during long distance transmission and immunity to electromagnetic interference (EMI), optical FBG sensors embedded tendon was developed to measure strain of 7-wire strand by embedding FBG sensor into the center king cable of 7-wire strand. This FBG sensors embedded tendon has been successfully applied to measuring the short-term anchor force. But to adopt this tendon to long-term monitoring, temperature compensation of the FBG sensors embedded tendon should be done. In this paper, we described how to compensate the effect in compliance with the change of underground temperature during long-term tension force monitoring of ground anchors by using optical fiber sensors (FBG: Fiber Bragg Grating). The model test was carried out to determine the temperature sensitivity coefficient (${\beta}^{\prime}$) of FBG sensors embedded tendon. The determined temperature sensitivity coefficient ${\beta}^{\prime}=2.0{\times}10^{-5}/^{\circ}C$ was verified by comparing the ground temperatures predicted from the proposed sensor using ${\beta}^{\prime}$ with ground temperatures measured from ground thermometer. Finally, temperature compensations were carried out based on ${\beta}^{\prime}$ value and ground temperature measurement from KMA for the tension force monitoring results of tension type and compression type anchors, which had been installed more than 1 year before at the test site. Temperature compensated tension forces are compared with those measured from conventional load cell during the same measuring time. Test results show that determined temperature sensitivity coefficient (${\beta}^{\prime}$) of FBG sensors embedded tendon is valid and proposed temperature compensation method is also appropriate from the fact that the temperature compensated tension forces are not dependent on the change of ground temperature and are consistent with the tension forces measured from the conventional load cell.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.5
• /
• pp.1730-1734
• /
• 2010

Generally, a pH value of secondary water in a nuclear power plant should be estimated after sampling and cooling down. In this process, the measurement of temperature is very important because a pH value is varied according to the temperature of secondary water. In this study, a noncontact fiber-optic temperature sensor using a silver halide optical fiber is fabricated to measure the temperature of cooled secondary water. And we have measured an infrared radiation, which is transferred by a silver halide optical fiber from a heat source, using a thermopile sensor. The relationships between the temperature of a heat source and the output voltage of the fiber-optic temperature sensor according to the change of distance and angle are determined. The measurable temperature range of the fiber-optic temperature sensor is from 25 to $60^{\circ}C$. Based on the results of this study, a noncontact temperature sensor using a silver halide optical fiber can be developed for the temperature measurement of the pH sample in the secondary water system.

• Food Science and Preservation
• /
• v.23 no.3
• /
• pp.422-431
• /
• 2016

To investigate the causes of the thermal deformations of packaging materials when microwave-heating ready-to-eat sauce products packaged in stand-up pouches, patterns of temperature changes were determined using an infra-red thermal imaging camera, a thermo-sensitive tape, and a fiver-optic thermometer. The temperature distributions of spicy chicken sauce and Indian curry samples in a stand-up pouch were found to be uneven during micrewave heating. A sharp increase in the temperature was detected, especially above the filling layers and in the corners of sealing layers of the package. The temperature measurements using an infra-red thermal imaging camera are restricted to the surface, and therefore might underestimate the actual temperature. Using a thermo-sensitive tape, temperature up to $200^{\circ}C$ were measured in the spicy chicken sauce sample showing package deformation. When the temperature is measured using a fiber-optic thermometer, it is crucial to have precise sensor performance to accurately measure the temperature in a narrow hot-spot area of the package. In this experiment, the fiber-optic thermometer was attached to a GaAs crystal sensor, which obtained more sensitive and accurate temperature measurements than those by a convectional sensor.

• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1454-1456
• /
• 2001

신장병 진단에 중요한 요소의 농도를 측정하기 위한 요소 센서를 반도체 위에 개발이 연구의 목적이다. 센서의 감도 측정은 선형 전위 주사법(Linear sweep voltammtry)을 이용하였다. 선형 전위 주사법은 가역적이든 비가역적이든 관계없이 cottrell 식에 의한 전류와 농도의 직선관계로부터 감도를 측정할 수 있는 장점이 있고 또한 저 농도에서 민감하게 반응한다. 따라서 기존 전위차 측정형 바이오 센서(Potentiometric biosensor)에서 규명할 수 없는 감도 문제를 선형 전위 주사법으로 규명하고자 하였다. 센서전극은 p-type 실리콘 웨이퍼 위에 전극을 제작했다. 그 위에 cyclic voltammetry 법을 사용하여 전도성 고분자를 전기 중합 하였고, 그위에 다시 chronoamperometry법을 사용하여 우레아제를 고정화 하여 작업전극으로 제작하였다. 센서의 감도는 phosphate buffer 용액(pH7.4)속에서 온도 35$^{\circ}C$를 유지하며 측정하였다.