• Journal of the Korean Society of Propulsion Engineers
• /
• v.1 no.2
• /
• pp.22-31
• /
• 1997

We developed a general purpose program for the analysis of flows in the combustor with recirculating flow regime and simulated the flows. The program uses non-staggered grids based on finite volume method and the primitive variables are cartesian velocities. The combustion model is irreversible one step reaction with infinite chemistry The Favre averaged governing equations are considered and the clipped gaussian distribution is considered as a probability density function of the conserved scalar. We calculated turbulent diffusion flame with recirculating flow regime. Simulation shows two recirculating regions like experimental results. Velocity, turbulent kinetic energy, temperature and concentration distribution in simulation agree well with experimental data.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.430-430
• /
• 2017

본 연구에서는 유역모델링 시 오염원 산정의 공간적 범위를 합리적으로 고려하기 위해서, 유역모델링을 위한 소유역 구분간의 공간해상도를 유역의 오염부하량 산정을 위한 공간단위 수준으로 설정하여 새만금호 유역수질모델링을 실시하였다. 모형 구축은 HSPF (Hydrological Simulation Program - Fortran)를 이용하였으며, 오염부하량 산정단위인 리 동의 행정경계, 수치표고모델(DEM), 농경지 배수로 등 구조물들을 고려하여 새만금 유역을 대상으로 804개의 소유역을 구분 적용하였다. 소유역 세분화에 따른 계산량을 고려하여 효과적인 모델 구동을 위해 만경유역 7개, 동진유역 7개, 연안유역 3개 (총 17개)의 서브모델로 모의시스템을 구성하여 상류에서 하류로 서브모델을 순차적으로 보 검정 및 모의하도록 구현하였다. 유량 보 검정은 14개소 수문측정자료(2009~2013)와 자동보정기법을 적용하여 수행하였다. 유량보 검정결과 NSE (Nash-Sutcliffe coefficient)가 0.66~0.97, PBIAS가 -31~16.5%, $R^2$는 0.75~0.98의 범위를 보여 모형의 적용성을 확인할 수 있었다. 한편, 수질 보 검정의 경우 29개소 수질측점을 대상으로 온도, DO, BOD, TN, TP의 항목에 대해 유량보정과 같은 기간에 대해 수동보정을 실시하였다. 수질결과는 일부 상류유역에서 갈수기시 모의값이 다소 불안정한 부분이 발견되나 대체로 각 측점의 수질에 대한 시간적 변동 패턴과 평균적 수질은 합리적으로 모의하는 것으로 나타났다. 공간세분화에 따른 모델링결과를 선행연구들과 비교한 결과, 유량부문에서 우수성을 보였으나 수질부문은 비슷한 수준으로 나타났다. 본 연구는 향후 유역 오염원, 수자원 운영 등에 관한 정밀 자료 확보 시 이를 고려하는 고도화된 수문 수질 모델링 개발 및 구축에 적용될 수 있는 시스템으로 활용성이 높을 것으로 판단된다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.05a
• /
• pp.65-66
• /
• 2018

국내 항만의 건설 및 확장 보수를 위한 설계 단계에서의 평면배치 검토시 항내측으로 내습하는 파랑변형특성에 대한 정밀한 평가는 필수적이다. 이에 따라 많은 수학적 모델들이 연안역과 항만에서의 파랑전파와 변형에 대해 개발되어 왔다. 특히 항내정온도의 해석은 항만 사용성 측면에서 매우 중요하며 실제 해상의 파랑상태와 유사한 불규칙파로의 해석이 요구되어 지고 있다. 항내정온도 해석에 있어서 항내파랑장 형성에 크게 영향을 미치는 구조물의 반사율을 효과적으로 적용하는 것은 매우 중요하다. 하지만, 구조물의 반사율은 이론계산이 어렵고, 일반적으로는 모형실험 혹은 현지관측에 의해 추정된다. 따라서, 일반적인 경우 비용 및 시간상의 제약으로 인해 평면 파랑모형으로 정온도 해석시 반사율의 적용은 구조형식별로 연구자들에 의해 개략 제시된 반사율을 적용하고 있다. 특히, 다방향 불규칙파의 적용시에 경계조건으로는 다방향 불규칙파를 효과적으로 제어할 수 있는 부분반사 경계면과 계산영역 밖으로 나가는 파랑에 대해서 인공적인 흡수층 또는 감쇠층(artificial damping layer)을 설정하여 반사를 제어하는 기법을 많이 적용하고 있다. 이때 항만구조물의 부분반사는 파랑제원에 따른 damping layer의 parameter의 조정에 의해 구조물의 구조형식별 반사율을 적절히 재현할 필요성이 있다. 본 연구에서는 불규칙파를 대상으로 damping layer의 parameter(무차원 감쇠계수, 감쇠층의 두께)등의 변화에 따른 반사율의 변화특성을 고찰하고, 향후 부분반사 경계면으로 damping layer가 적용되는 평면 파랑모형의 정온도 해석시 부분반사의 적용에 대한 기초자료를 제공하고자 한다.

• International Journal of Highway Engineering
• /
• v.8 no.1 s.27
• /
• pp.25-32
• /
• 2006

Behavior of concrete pavement due to temperature gradient was investigated for 48 hours at test road using Falling Weight Deflectometer. The deflections at slab center changed similarly to those of ambient temperature and temperature gradients in the slab. And rapid variations in the deflections were observed between 8 to 12 in the morning. However, dynamic modulus of subgrade reaction and joint deflections showed reverse trends to the ambient temperature and temperature gradients. The dynamic modulus of subgrade reaction was significantly affected by temperature gradient when its value got higher. Backcalculated elastic moduli were obtained using AREA method and Method of Equivalent Thickness. The trends of the backcalculated elastic modulus were similar to those of dynamic modulus of subgrade reaction. Measured load transfer efficiencies showed maximum peak in the morning due to dowel locking. However, additional effort is necessary to verify the result.

• Journal of the Korean Vacuum Society
• /
• v.21 no.3
• /
• pp.171-177
• /
• 2012

The computer program (EPR-NMR program version 6.2) employed here sets up the spin Hamiltonian matrices and determines their eigenvalues using exact diagonalization. We study the electron spin resonance for $Mn^{2+}$ in ferroelectric $LiNbO_3$ single crystals. The self-energy is obtained using the projection operator method developed by Argyres and Sigel. The self-energy is calculated to be axially symmetric about the by the spin Hamiltonian. The line-widths decreased as the temperature increased; we assume that the hyperfine structure transition is a more dominant scattering than the other transitions. We conclude that the calculation process presented in this study is useful for quantum optical transitions.

• Journal of the Korean Vacuum Society
• /
• v.17 no.4
• /
• pp.302-310
• /
• 2008

Heat transfer between substrate and substrate-heater in low vacuum was investigated. The convection related with gas flow and pressure, the heat conduction considering surface roughness and contact pressure, and the heat loss by radiation depending on the surface emissivity were considered. The coefficient of heat conduction $h_c$ in the Fourier's law were determined experimentally from the temperature difference between the substrate and the substrate-heater in the range of substrate-heater temperature $100\;-\;500^{\circ}C$, in the pressures of 300 mTorr - 1 Torr. The temperature difference was then calculated in the reverse way for the purpose of verification, using the heat flow and the experimentally determined coefficients. The verified temperature differences were thus obtained within 0.33 % error.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1346-1353
• /
• 2007

The simulation analysis of fire-driven flow and passenger evacuation in Daegu subway station, Chung-Ang, have been performed. The first location of outbreak of fire is inside passenger car in the third basement in Chung-Ang station. The smoke flow in the second and third basement has been analyzed using FLUENT 6.2. The CO(carbon monoxide) and temperature distribution in the train units and station platform have been obtained and transferred to input data for evacuation simulation. The highest temperature in the train units was 1500K. For the simulation of passenger evacuation, EXODUS has been used for whole basements (level 1${\sim}$ level 3) in the station. Total number of people was assumed to be one thousand and 640 were placed inside train and 360 were placed outside train. In evacuation simulation, an average of 135 passengers were killed and an average time to evacuate takes 10min 19sec. The main evacuation routes used by passengers were investigated and the cause of death was identified by evacuation simulation.

• Clean Technology
• /
• v.12 no.2
• /
• pp.78-86
• /
• 2006

Computational analyses are conducted on the combustion characteristics of the coal- and the biomass-derived synthetic gases with low-Btu heating value in gas engine. Using thermochemical analyses on the synthetic gases, combustion pressure, temperature, exhaust gas composition, NO emission and engine power are predicted and the predicted results are compared with small-scale pilot engine test results. In order to investigate the unsteady combustion phenomena in gas engine combustion chamber, CFD analyses are carried out on the coal and the biomass synthetic gases and their computed results are compared to provide the guidelines for the design modification and the tuning of the gas engine burning the synthetic gases as alternative fuels.

• Fire Science and Engineering
• /
• v.27 no.6
• /
• pp.15-20
• /
• 2013

The convective heat transfer coefficient, emissivity, and flame heat flux on the surface of Duglas fir are estimated by using repulsive particle swarm optimization. The surface temperature, mass loss rate, and ignition time are measured for various incident heat fluxes from a cone heater of the cone calorimeter. The calculated surface temperatures obtained by using the optimized convective heat transfer coefficient, emissivity and flame heat flux on the surface in this study match well with those obtained from the test. The maximum error between the predicted and measured surface temperatures for the three different external heat fluxes is within 2% showing reasonable agreements. The methodology proposed in this study can be used to obtain various values related to heat transfer on a flaming surface that are difficult to measure in experiments.

• 한국해양학회지
• /
• v.22 no.4
• /
• pp.217-227
• /
• 1987

The heat budget of the south eastern region (33$^{\circ}$N-36$^{\circ}$N, 120$^{\circ}$E-125$^{\circ}$E) of the Yellow Sea was calculated by using the meteorological and oceanographical data. The sensibly heat, the evaporation heat and the long wave back radiation have annual variation and increases toward south with strong gradient along the Cheju channel in winter, but they all show tendency to decrease toward eastern coastal area in summer. The area is roughly divided into three parts, the central part, the coastal part and the southern part, according to the characteristics ovariation and distribution patterns of the exchanged heats. The amplitude of the annual variation of total heat exchange in the southern part is very large compare to those of the central and coastal part. The studied area is appeared to be heated mainly by the evaporation heat and the sensoble heat, based on the results of this study.