• 제목/요약/키워드: 온도 보상

검색결과 417건 처리시간 0.025초

통신방송위성 중계기용 Ku-대역 채널증폭기 시험 모델 설계 (Design of Ku-band Channel Amplifier Engineering Model for Communication and Broadcasting Satellite Payload)

  • 장병준;염인복;이성팔
    • 한국전자파학회논문지
    • /
    • 제13권10호
    • /
    • pp.982-988
    • /
    • 2002
  • 본 논문은 통신방송위성 중계기용 Ku-대역 채널증폭기 시험모델의 설계와 제작과정을 요약하였다. 채널증폭기의 구조는 고정이득제어 모드에서는 전압제어형 감쇄기를 이용한 아날로그 이득 조절 방식을 사용하였으며 자동레벨조절 모드에서는 루프제어방식을 이용한 출력레벨 제한회로를 사용하였다. 설계된 채널증폭기는 전압제어형 PEN-다이오드 감쇄기와 온도보상회로 등의 최신 기술 등을 이용하였다. 측정된 특성은 설계치와 동일하게 28 dB의 이득조절 및 16 dB의 자동이득조절 범위를 갖는 것을 확인하였다. 설계된 시험모델은 인증을 거치면 Ku-대역 통신방송 위성중계기용 채널증폭기로 사용되어질 수 있다.

콤팩트 형광램프용 전자식 안정기의 주파수 제어에 의한 온도보상 (Compensation of temperature characteristics by frequency control of an electronic ballastfor a compact fluorescent lamp)

  • 송상빈;곽재영;여인선
    • 대한전기학회논문지:전기기기및에너지변환시스템부문B
    • /
    • 제48권1호
    • /
    • pp.27-33
    • /
    • 1999
  • Compact fluorescent lamps are very sensitive to the variation of ambient temperature. This paper investigates the temperature characteristics of a 15[W] compact fluorescent lamp, and compensates the variation of light output by frequency control of its electronic ballast. Circuit parameters for the inverter of the electronic ballast are obtained by analyzing the R-L-C equivalent circuit for the inverter and the lamp. The optimum ratio of the two capacitance($C_1$/$C_2$), which are connected with the lamp in series and in parallel, respectively, is determined which consideration of the temperature variation within a range of 10~35[$^{\circ}C$]. As a result a value of 10 for the ratio is obtained at an operating frequency of 57[kHz], and with this value the frequency control works well for temperature compensation. Its validity is verified by investigating light output stabilization characteristics resulting from frequency control of the lamp at various temperatures.

  • PDF

광경화성 액정과 비반응성 네마틱 액정 혼합 필름의 분자 배향 및 광학 특성 (Molecular Orientation and Optical Properties of Liquid Crystal Mixture Films of Photo-Reactive Mesogens and Non-Reactive Nematic Liquid Crystals)

  • 이몽룡;신미영;김성현;송기국
    • 폴리머
    • /
    • 제35권5호
    • /
    • pp.493-498
    • /
    • 2011
  • Reactive mesogen인 광경화성 액정은 광반응에 의해 분자들이 네트워크 구조를 형성하여 초기 액정 분자들의 배향을 유지한 상태로 필름을 만들 수 있다. 광경화성의 reactive mesogen과 광반응 그룹이 없는 네마틱 액정을 혼합하여 경화 전과 후의 액정 혼합물의 배향을 비교하였고, 비반응성 네마틱 액정의 양과 온도에 따른 액정필름의 복굴절 변화를 조사하였다. 네마틱 액정의 양에 따라 복굴절이 다른 필름을 얻을 수 있어 reactive mesogen을 이용한 광학 보상필름 응용 가능성을 확인하였다.

셀프리더십전략이 학업성과에 미치는 영향에 대한 한국과 중국학생 비교연구 (A Study on the Influence between Self-leadership Strategies and Learning Performance at IT Classes mediated by Attitude of Attendance: Comparative Research between Korea and China)

  • 박기호
    • 디지털융복합연구
    • /
    • 제9권6호
    • /
    • pp.411-419
    • /
    • 2011
  • 본 연구는 셀프리더십 전략이 학생들의 학습태도에 영향을 미치는지, 학습태도가 매개변인의 역할을 하여 학업성과에 어떤 영향을 미치는지를 연구하였다. 특히 중국, 필리핀 등으로부터 국내로 유학 온 학생들이 증가함에 따라 이들과 한국학생간의 차이점 유무를 비교 연구하여 효과적인 교육활동을 위한 프로그램 준비가 필요한 시점이다. 실증연구를 위한 표본으로 한국 대학생 64명과 유학 중인 중국 대학생 31명을 대상으로 설문조사를 실시하였다. 연구결과는 조직 구성원 혹은 학생들의 셀프리더십을 고양함으로써 과업에 임하는 태도나 수업에 임하는 바람직한 태도를 제시하여 기업 생산성이나 학업성과를 촉진할 수 있는 방안수립에 시사점을 줄 수 있을 것이다.

국내개발 MMIC칩을 적용한 W-Band 송수신모듈 개발 (Development of W-band Transceiver Module using Manufactured MMIC)

  • 김완식
    • 한국인터넷방송통신학회논문지
    • /
    • 제17권2호
    • /
    • pp.233-237
    • /
    • 2017
  • 저잡음 증폭기, 믹서, 로컬 증폭기와 온도보상회로를 포함하는 다채널 수신 블록이 단일 MMIC 칩으로 설계 및 제작되었다. 이 국내개발 MMIC 칩을 송수신 모듈내에 장착하고 제작하여 송수신 모듈의 잡음지수와 변환이득 등을 측정하였으며, 또한 상용 칩을 장착하여 제작한 송수신모듈의 측정 결과와 이를 비교하였다. 결과적으로 국내개발 MMIC 칩을 이용한 송수신모듈이 상용 MMIC 칩을 이용한 송수신 모듈보다 잡음지수 및 평탄도 등에서 국내 개발 칩이 더 변환이득 특성이 좋으며, 채널당 이득 차이는 각각 0.5dB과 1.5dB이고 위상 차이는 각각 1.06도와 3.93도로 비교적 국내 개발 칩이 우수한 특성을 보였다.

셔터렌즈에 의한 검출기 불균일 보정을 적용한 이중배율 적외선 카메라 설계 (Design of Two Zoom Infrared Camels using Noise Uniformity Correction by Shutter Lens)

  • 안규봉;김서현;정재철;조문신;김창우;김현숙
    • 한국광학회지
    • /
    • 제18권2호
    • /
    • pp.135-141
    • /
    • 2007
  • 완전한 2차원 배열을 갖는 중적외선 대역의 $320\times240$ 검출기를 사용하는 3세대 열상 장비의 설계 및 제작은 이차원 배열 검출기 제작 기술의 발달과 영상 신호처리 기술의 진전으로 인해 최근 더욱 더 활발히 이루어지고 있다. 본 논문은 다양한 응용 분야에서 적외선 센서로 사용될 수 있도록 하기 위하여 소형 경량화 제작을 목표로 한 3세대 열상장비의 이중 배율 적외선 카메라의 설계와 Defocus용 셔터 렌즈에 의한 영상기반 불균일 보정 방식에 대해 다룬다.

고전압 펄스신호 측정용 분압기의 온도보상에 관한 실험 (Experimental Analysis on Temperature Compensation of Capacitive Voltage Divider for a Pulsed High Voltage Measurement)

  • 장성덕;손윤규;권세진;오종석;조무현
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
    • /
    • pp.1530-1533
    • /
    • 2005
  • Total 12 units of high power klystron-modulator systems as microwave source is under operation for 2.5-GeV electron linear accelerator in Pohang Light Source(PLS) linac. RF power and beam power of klystron are precisely measured for the effective control of electron beam. A precise measurement and measurement equipment with good response characteristics are required for this. Input power of klystron is calculated from the applied voltage and the current on its cathode. Tiny measurement error severely effects RF output power value of klystron. Therefore, special care is needed to measure precise beam voltage. Capacitive voltage divider(CVD) unit is intended for the measurement of beam voltage of 400 kV generated from the pulsed klystron-modulator system. Main parameter to determine the standard capacitance in the high arm of CVD is dielectric constant of insulation oil. Therefore CVD should be designed to have a minimum capacitance variation due to voltage, frequency and temperature in the measurement range. This paper will discuss the analysis of capacitive voltage divider for a pulsed high-voltage measurement, and the empirical relations between capacitance and oil temperature variation.

  • PDF

다이어프램형 압력센서에서 주변 온도에 의한 오차 보상 (Error Compensation due to Environmental Temperature for Diaphragm-Type Pressure Sensor)

  • 윤대중;안중환;이길승;김화영
    • 센서학회지
    • /
    • 제28권3호
    • /
    • pp.177-181
    • /
    • 2019
  • Pressure sensors are used in various industries such as automobiles, airplanes, medical equipment, and coolers. Even if the ambient temperature changes, the measurement is reliable and stable. In this study a diaphragm-type pressure sensor was used to derive a temperature-compensated pressure estimation equation for accurate pressure measurement at $100^{\circ}C$ and $-40^{\circ}C$. To understand the characteristics of the pressure sensor diaphragm with respect to temperature and pressure, experiments were conducted in temperature-variable chamber using FEM analysis to confirm that the influence of temperature effect was nonlinear. Based on the experimental results, a nonlinear method for calculating the pressure by compensating for the error due to temperature was derived. The calculated pressure value is lower than 0.5 % at low and high temperatures, and lower than 0.4 % at $22^{\circ}C$, thereby eliminating the effect of temperature.

온도(溫度), 광도(光度) 및 $CO_2$의 농도(濃度)가 고추냉이의 광합성(光合成)과 호흡(呼吸)에 미치는 영향(影響) (Effect of Temperature, Light Intensity and $CO_2$ Concentration on Photosynthesis and Respiration of Wasabia japonica Matsum)

  • 최선영;이강수;윤종선
    • 한국약용작물학회지
    • /
    • 제3권3호
    • /
    • pp.181-186
    • /
    • 1995
  • 본(本) 연구(硏究)는 고추냉이의 광합성(光合成) 효율증진(效率增進)을 위한 기상환경(氣象環境)에 조건(條件)을 알아내어 재탑적지(栽培適地)의 선정(選定)과 재배관리(栽培管理)에 대한 기초적(基礎的)인 자료(資料)를 제공(提供)하고자 온도(提供)와 광도(光度), 그리고 $CO_2$의 농도(農度)에 대한 광합성(光合成), 청호흡(晴呼吸) 그리고 광호흡(光呼吸)의 반응(反應)을 조사(調査)하였다. 1. 고추냉이의 광합성(光合成)에 최적온도(最適溫度)는 $17{\sim}20^{\circ}C$이었고 최적온도(最適溫度) 이상(以上)에서 광합성(光合成)이 크게 감소(減少)하였으며, 암호흡(暗呼吸)은 $15^{\circ}C$에서 $30^{\circ}C$까지 온도(溫度)가 높아질수록 증가(贈加)하였다. 2. 광보상점(光補償點)은 고추냉이가 $6.0 {\mu}E\;m^{-2}s^{-1}$으로 옥수수의 $36.7{\mu}E\;m^{-2}s^{-1}$보다 낮았으며 광포화점(光飽和點)은 고추냉이와 옥수수 모두 $600{\mu}E\;m^{-2}s^{-1}$로 비슷하였다. 3. $CO_2$ 보상점(補償點)은 고추냉이가 67. 3 ppm으로 옥수수 11.6 ppm보다 높았으며 암호흡(暗呼吸)은 $CO_2$의 농도(濃度)가 낮을수록 높았다. 4. 고추냉이의 광호흡(光呼吸)은 광도(光度) $l000{\mu}E\;m^{-2}s^{-1}$에서 $3.3 mg\;CO_2\;dm^{-2}\;hr^{-1}$이었으며 광도(光度)가 낮아짐에 따라 감소(減少)하였다. 5. 기공(氣孔)의 분포(分布)는 잎의 표면(表面)에 약 76개/$mm^{-2}$, 뒷면에 623개/$mm^{-2}$이었으며 기공(氣孔)의 크기는 표면(表面)의 것이 $12{\mu}m$이고 뒷면의 것이 $17{\mu}$로 나타났다.

  • PDF

광도, 온도, $\textrm{CO}_2$ 농도 및 엽중 질소농도의 변화에 따른 양액재배 오이의 광합성속도에 관한 수리적 모형 (Mathematical Models of Photosynthetic Rate of Hydroponically Grown Cucumber Plants as Affected by Light Intensity, Air Temperature, Carbon Dioxide and Leaf Nitrogen Content)

  • 임준택;백선영;정현희;현규환;권병선
    • 생물환경조절학회지
    • /
    • 제9권3호
    • /
    • pp.171-178
    • /
    • 2000
  • 시설 오이재배에서 조절가능한 환경요인들, 즉 광도, $CO_2$ 농도, 온도 그리고 엽중 질소 농도의 변화에 따른 양액재배 오이 엽의 총광합성 속도를 측정하였다. 광보상점은 10~20$\mu$mol.m$^{-2}$ .s$^{-1}$ 정도로 낮았고 광포화점은 1000$\mu$mol.m$^{-2}$ .s$^{-1}$ 이상이었으며, 오이의 총광합성 속도는 온도가 상승할수록 증가속도는 감소하지만 지속적인 증가를 보였으나 24~32$^{\circ}C$ 사이에서 광합성 속도는 큰 차이를 보이지 않아 이 범위가 오이 생육에 대한 적정온도인 것으로 나타났다. $CO_2$ 보상점은 20-40$\mu$mol.mol$^{-1}$ 사이에 위치하였고 $CO_2$포화점은 1200$\mu$mol.mol$^{-1}$이상으로 나타났으며 엽중은 질소함량의 증가에 따른 잎의 총광합성 속도의 변화는 sigmoid형의 증가추세를 보였다. 요인들간의 상호작용 효과에서는 모든 경우 상승적으로 나타나, 한 요인의 수준이 증가함에 따라 타 요인의 수준의 증가에 따른 총광합성 속도도 상승적을 증가하였다. 각환경요인의 변화와 요인들간의 상호작용에 따른 총광합성 속도의 변화에 대한 수리적 모형을 개발하였다. 이들 모형은 시설 내 환경변이에 따른 오이의 생육 내지는 수량에서의 차이를 밝히는데 이용될 수 있으며 오이의 식물생장 모형이나 더 나아가 경영합리화를 위한 오이 생산 전문가 시스템의 개발에 필요한 기초 자료로 이용될 수 있을 것이다.

  • PDF