• Title/Summary/Keyword: 온도 경사

Search Result 307, Processing Time 0.025 seconds

Numerical Analysis of Effect of Baffles with 9 Diamond Type Holes on Flow Pattern (9개 다이아몬드형 구멍이 설치된 배플이 유동 양상에 미치는 효과에 대한 수치해석)

  • Ary, B.K.P;Ahn, S.W.
    • Journal of Power System Engineering
    • /
    • v.15 no.1
    • /
    • pp.32-38
    • /
    • 2011
  • 2개의 경사 배플을 가진 사각 채널내의 열전달과 유동양상에 특성을 조사하기 위해 수치해석을 행하였다. 본 연구에서는 바닥에서만 가열된 채널 내 2개의 배플에 9개의 다이아몬드형 구멍을 설치하였다. 배플은 19.8 cm의 폭과 23.2 cm의 길이 그리고 0.5 cm의 두께의 플렉시 글라스를 사용하였다. 다이아몬드형 구멍의 크기는 $2.55\;cm{\times}2.55\;cm$이며 배플 경사각은 $5^{\circ}$를 유지하였다. 레이놀즈수의 범위는 23,000에서 57,000 이다. SST k-${\omega}$ 난류모델을 사용하였다. 누셀트(Nu) 수의 수치해석 결과는 실험 결과로 검증하였다. 유동장에 관한 수치해석으로부터 배플 구멍 근처의 유동 양상을 나타낼 수 있었고 이러한 유동장이 온도장의 특징에 크게 영향을 미친다는 것을 나타내었다. 국부 누셀트수는$x/D_h$=2.5 에서 최대가 되었다.

Tilling Properties of Stone Burying Rotarvator (매몰형 자갈밭 로타리의 경운특성)

  • 김상철;박우풍;이운용;김용덕;윤창신
    • Proceedings of the Korean Society for Agricultural Machinery Conference
    • /
    • 2003.07a
    • /
    • pp.128-133
    • /
    • 2003
  • 우리나라는 국토의 약 68%가 산악지형으로 포장의 경사와 토양중의 자갈이 밭작물의 재배와 기계화에 장애가 되고 있다. 포장중의 자갈은 토양의 보습력과 통기성을 향상시키고 경사지에서의 토양침식을 방지하는 긍정적 측면이 있으나, 자갈이 토양 표면에 산재할 경우 작물의 발아와 입모를 억제하고, 작물생육을 위한 토양환경을 조성하는 경운작업 재배관리 작업을 어렵게 하기 때문에, 농민들은 포장내의 자갈을 제거하기 위해 많은 노력을 기울이고 있다. 특히 관행 로타리 작업 시에는 자갈이 대부분 토양 표면에 노출됨으로 생육환경 및 기계작업 환경을 더욱 악화시키게 된다. 2cm이상의 자갈이 토양 표면에 있을 경우 기계 파종이나 이식이 어렵고 발아이후의 생육도 좋지 않게 된다. 그러나 지중에 존재하는 자갈은 토양의 투수성을 향상하여 경사지에서 토양침식을 막아주고, 수분과 온도의 보지력을 크게하고 토양 통기성을 향상시키므로 뿌리의 발육을 촉진해 준다. (중략)

  • PDF

Experimental study on heat transfer inside inclined thermosyphon with low integral-fins (낮은 핀을 가진 경사 써모사이폰의 열전달 성능에 관한 실험적 연구)

  • 조동현;권혁홍
    • Korean Journal of Air-Conditioning and Refrigeration Engineering
    • /
    • v.10 no.2
    • /
    • pp.165-172
    • /
    • 1998
  • An experimental study on the heat transfer of the inclined thermosyphon with low integral-fins in which boiling and condensation occurred is performed to investigate its heat transfer performance. Water and CFC-30 have been used as the working fluids. The operating temperature and the inclination angle of thermosyphon have been used as the experimental parameters. The heat flux input and the inclination angle $\theta$ towards the vertical position were varied in steps. The heat transfer rate in the thermosyphon was depended upon the inclination angle. In addition, it is to obtain the overall heat transfer coefficients and the characteristics as a operating temperature for the practical applications.

  • PDF

Manufacturing of High Density Woodceramics by Recarbonization Using a Resin Impregnation Board - Change of Density Profile - (수지함침보드의 2차 탄화에 의한 고밀도 우드세라믹 제조 - 밀도경사 변화 -)

  • Oh, Seung-Won;Jeon, Soon-Sick;Byeon, Hee-Seop
    • Journal of the Korean Wood Science and Technology
    • /
    • v.39 no.1
    • /
    • pp.60-67
    • /
    • 2011
  • A repeated impregnation and carbonization process was introduced to product high-density woodceramics using a resin impregnation board. The density profile were measured to further confirm morphologically and structurally occurred changes of one-time and two-time phenolic resin-treated and carbonized woodceramics. After the two-time carbonization of the products, the minimum, average and maximum densities increased more than those of the one-time carbonized woodceramics, and the increase of density profile. Therefore, it is considered that the preparation of uniformed woodceramics with high-density and low density dissipation can be produced by a repeated impregnation and carbonization).

Thermoelastic deformation and stress analysis of a FGM rectangular Plate (경사기능재료 사각 판의 열 탄성 변형과 응력 해석)

  • Kim,Gwi-Seop
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.31 no.1
    • /
    • pp.34-41
    • /
    • 2003
  • A Green's function approach is adopted for analyzing the thermoelastic deformation and stress analysis of a plate made of functionally graded materials (FGMs). The solution to the 3-dimensional steady temperature is obtained by using the laminate theory. The fundamental equations for thermoelastic problems are derived in terms of out-plane deformation and in-plane force, separately. The thermoelastic deformation and the stress distributions due to the bending and in-plane forces are analyzed by using a Green’Às function based on the Galerkin method. The eigenfunctions of the Galerkin Green's function for the thermoelastic deformation and the stress distributions are approximated in terms of a series of admissible functions that satisfy the homogeneous boundary conditions of the rectangular plate. Numerical examples are carried out and effects of material properties on thermoelastic behaviors are discussed.

표면 분석법을 이용한 경질 3가 크롬 도금 공정 변수 간 상관도 분석

  • Lee, Jong-Il;Lee, Ju-Yeol;Lee, Man
    • Proceedings of the Korean Institute of Surface Engineering Conference
    • /
    • 2009.05a
    • /
    • pp.154-154
    • /
    • 2009
  • 경질 3가 크롬 도금액은 내적인 구성 조성물의 화학비나, 외적인 온도, 시간 등 여러 가지 실험인자들의 복잡한 작용으로 인해 어떤 인자가 어떠한 작용에 상호 영향을 미치는지 파악하기가 쉽지 않다. 통계 프로그램을 사용하여 실험계획법을 작성하고, 측정된 반응치료로부터 분석을 실시하여 최적경사경로를 도출하였다. 또한, 잔차분석과 호감도 함수를 이용한 최적화가 진행되었다.

  • PDF

Analysis of Correlationship between Topography and Ground Surface Temperature Using Landsat 7 ETM+ Satellite Data (Landsat 7 ETM+ 위성자료로부터 지형과 지표온도의 상관성 분석)

  • Lee, jin-duk;Bhang, kon-joon;Han, seung-hee
    • Proceedings of the Korea Contents Association Conference
    • /
    • 2012.05a
    • /
    • pp.131-132
    • /
    • 2012
  • 서울지역을 대상으로 하여 Landsat 7 ETM+ 영상의 열적외선 채널을 이용하여 추출한 지표온도를 추출함에 있어서 DEM데이터로 부터 추출한 경사도와 사면방향 등의 지형조건과의 상관관계를 분석하고자 하였다.

  • PDF

Effects of Shading Rate and Method on Inside Air Temperature Change in Greenhouses (차광율 및 차광방법이 온실내부의 온도변화에 미치는 영향)

  • 이현우;이석건;김길동;이종원
    • Proceedings of the Korean Society for Bio-Environment Control Conference
    • /
    • 2001.04b
    • /
    • pp.27-28
    • /
    • 2001
  • 온실의 차광설계에 필요한 기초자료를 제시하기 위하여 온실모형과 실험온실을 이용하여 외부차광재의 적정 설치간격 분석, 차광재별 광투과율 분석, 차광율에 따른 온실내부온도의 변화 분석, 차광이 온실내부의 지온변화에 미치는 영향분석 및 외부차광과 내부차광의 차광효과 비교를 실시하였다. 외부경사차광시 온실 지붕과 차광재의 설치간격은 10-30cm에서 차광효율이 가장 좋은 것으로 나타났으나 환기창의 개폐를 위한 공간이 필요하지 않는 온실에서는 10cm 정도이면 충분한 간격이 될 것으로 판단된. (중략)

  • PDF

The Effect of Temperature on the Tire-Pavement Noise (온도가 타이어 소음에 미치는 영향)

  • Yeo, Woon-Ho
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 2000.06a
    • /
    • pp.576-580
    • /
    • 2000
  • Tire-pavement noise is a significant portion of noise coming from road vehicles and is therefore a logical focus of efforts to reduce overall traffic noise. A small but significant reduction of noise level with positive temperature increases was observed for some tires. The reduction was evident in two of the tires at 53 km/h and five of the tires at 80 km/h. The temperature gradient of the different tires at 80 km/h range from -0.07 to +0.01 dB/$^{\circ}C$. Frequency analysis of the tire noise identified that noise content in the range of 1,300 to 1,900 Hz is particularly sensitive to temperature changes.

  • PDF

Analysis of Dynamic Behavior of Group Piles in Asymmetric Ground (비대칭지반에 설치된 무리말뚝의 동적거동 분석)

  • Kyungil Cho;Hongsig Kang;Kusic Jeong;Kwangkuk Ahn
    • Journal of the Korean GEO-environmental Society
    • /
    • v.24 no.10
    • /
    • pp.41-49
    • /
    • 2023
  • Structures such as bridge columns installed on the asymmetric ground such as mountain areas and sloping ground are subject to various loads such as wind, temperature, earthquake, and etc. The pile foundation is generally applied to bridge columns on the asymmetric ground in order to stably support structures. The behavior of the pile foundation supporting bridge columns changes due to various load conditions. In particular, ground-pile-structure interactions should be studied to analyze the behavior of the pile foundation that supports bridge columns effected by dynamic loads such as earthquakes. The pile foundation installed on the asymmetric ground effected by the earthquake has the complicated dynamic interaction between the foundation and the ground due to the ground slope, the difference in soil resistance according to the shaking direction, and the ground movements. In this study, the 1g shaking table tests were conducted to confirm the effect of the slope of the sloping ground on the dynamic behavior of group piles supporting the superstructure installed at the berm of the sloping sandy soil which is the asymmetric ground. The result shows that the acceleration of the pile cap and the superstructure decrease as the slope of the sloping ground increase, and the slope of the dynamic p-y curve of the pile decrease.