• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.173-173
• /
• 2012

중력류는 두 유체 사이에서 물질의 종류 또는 온도차로 인한 밀도 차이에 의해 발생되는 유체의 흐름을 말하며, 자연환경에서는 저수지에서의 중층탁류, 사막에서의 모래 폭풍, 하구에서의 염수쐐기 등이 그 예이다. 여름철에 강우가 집중되는 우리나라는 홍수에 의한 범람, 침수 등이 발생할 뿐만 아니라 댐이나 하천, 호수 등에 흙탕물이 유입되어 중간층에 정체하는 중층탁류에 의한 피해가 자주 발생하고 있다. 과거에 중층탁류는 일시적인 현상에 불과하였으나 오늘날에는 인공적으로 형성된 정체성 호수나 하천에서 장기간 체류하여 생태계의 교란과 수질 악화를 초래하고 있다. 중층탁류에 의한 피해를 저감시키기 위해서는 본래 자연 상태의 하천이나 호수와 같이 온도분포가 비선형적으로 성층화 된 상태에서 탁수가 유입되어 중층탁류가 형성되는 과정과 흐름 특성을 이해하는 것이 선행되어야 한다. 본 연구에서는 중력류 흐름 해석을 위한 실험 장치를 개발하였다. 실험 장치 중 수조의 제원은 1200 $700{\times}300mm$이며, 수조 상부에는 가열장치를 설치하였고, 수조 하부에는 냉각장치를 설치하였다. 이들 장치들을 가동하여 깊이에 따른 자연현상에서의 비선형적인 온도 단면을 재현한다. 수리 실험방법은 깊이 방향으로 온도에 따라 비선형적으로 성층화 된 유체 내로 경사가 있는 판을 따라 수조내의 성층화된 유체의 중간 온도 혹은 밀도를 가진 유체를 침입시킨다. 침입유체는 성층화된 유체 내에서 초기에는 중력에 의해 운동량을 갖고 경사면을 따라 일정한 속도로 흘러내려 간다. 이후 바닥으로 하강 한 후 부력에 의해 상승하여 동일한 밀도층의 위치에서 횡방향으로 전파하게 된다. 이 연구에서는 이와 같이 비선형적으로 성층화된 유체 내에서의 침입 중력류의 흐름 특성을 실험적으로 관측하고 분석한다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.11 no.3
• /
• pp.223-228
• /
• 2009

The aim of this research is to analyse the dynamic characteristics of the hot upper smoke layer in case of fire in a tunnel. In order to get the result, computer simulation technique has been used. The fire scenarios were set on the basis of standard cross section of national and express highways through NIST's FDS. As the area of a tunnel increased, the influence of the wind velocity decreased. Furthermore, the influence of the slope of a road was reduced as the wind velocity increased. On the other hand, as the wind velocity increased, the influence of the slope of a road decreased. This phenomena is believed to be caused by the cooling effect of wind which is over 1 m/s in speed, hence, reducing the influence of the effect of slope.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.8
• /
• pp.545-551
• /
• 2018

For domestic application of the temperature gradient model proposed by foreign design standards, a specimen of steel box girder bridge was fabricated with the following dimensions: 2.0 m width, 2.0 m height and 3.0 m length. Temperature was measured using 24 temperature gauges during the summer of 2016. The reliability of the measured data was verified by comparing the measured air temperature with the ambient air temperature of the Korea Meteorological Administration. Of the measured gauges, four temperature gauges that can be compared with the temperature difference of the Euro code were selected and used to analyze the distribution of the measured temperatures at each point. The reference atmospheric temperature for the selection of the maximum temperature difference was determined by considering the standard error. Maximum and minimum temperatures were calculated from the four selected points and the resulting temperature difference was calculated. The model for the temperature difference in the steel box girder bridge was shown by graphing the temperature difference. Compared to the temperature distribution of the Euro code, the presented temperature difference model showed a temperature difference of $0.9^{\circ}C$ at the top and of $0.3^{\circ}$ to $0.4^{\circ}C$ at the intermediate part. These results suggested that the presented model could be considered relatively similar to the Euro code The calculated standard error coefficient was 2.71 to 2.84 times the standard error and represents a range of values. The proposed temperature difference model may be used to generate basic data for calculating the temperature difference in temperature load design.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.41 no.6
• /
• pp.107-116
• /
• 2013

This study was undertaken to investigate the characteristics of retention and evapotranspiration in the extensive greening module of sloped and flat rooftops for stormwater management and urban heat island mitigation. A series of 100mm depth's weighing lysimeters planted with Sedum kamtschaticum. were constructed on a 50% slope facing four orientations(north, east, south and west) and a flat rooftop. Thereafter the retention and evapotranspiration from the greening module and the surface temperature of nongreening and greening rooftop were recorded beginning in September 2012 for a period of 1 year. The characteristics of retention and evapotranspiration in the greening module were as follows. The water storage of the sloped and flat greening modules increased to 8.7~28.4mm and 10.6~31.8mm after rainfall except in the winter season, in which it decreased to 3.3mm and 3.9mm in the longer dry period. The maximum stormwater retention of the sloped and flat greening modules was 22.2mm and 23.1mm except in the winter season. Fitted stormwater retention function was [Stormwater Retention Ratio(%)=-18.42 ln(Precipitation)+107.9, $R^2$=0.80] for sloped greening modules, and that was [Stormwater Retention Ratio(%)=-22.64 ln(X)+130.8, $R^2$=0.81] for flat greening modules. The daily evapotranspiration(mm/day) from the greening modules after rainfall decreased rapidly with a power function type in summer, and with a log function type in spring and autumn. The daily evapotranspiration(mm/day) from the greening modules after rainfall was greater in summer > spring > autumn > winter by season. This may be due to the differences in water storage, solar radiation and air temperature. The daily evapotranspiration from the greening modules decreased rapidly from 2~7mm/day to less than 1mm/day for 3~5 days after rainfall, and that decreased slowly after 3~5 days. This indicates that Sedum kamtschaticum used water rapidly when it was available and conserved water when it was not. The albedo of the concrete rooftop and greening rooftop was 0.151 and 0.137 in summer, and 0.165 and 0.165 in winter respectively. The albedo of the concrete rooftop and greening rooftop was similar. The effect of the daily mean and highest surface temperature decrease by greening during the summer season showed $1.6{\sim}13.8^{\circ}C$(mean $9.7^{\circ}C$) and $6.2{\sim}17.6^{\circ}C$(mean $11.2^{\circ}C$). The difference of the daily mean and highest surface temperature between the greening rooftop and concrete rooftop during the winter season were small, measuring $-2.4{\sim}1.3^{\circ}C$(mean $-0.4^{\circ}C$) and $-4.2{\sim}2.6^{\circ}C$(mean $0.0^{\circ}C$). The difference in the highest daily surface temperature between the greening rooftop and concrete rooftop during the summer season increased with an evapotranspiration rate increase by a linear function type. The fitted function of the highest daily surface temperature decrease was [Temperature Decrease($^{\circ}C$)=$1.4361{\times}$(Evapotranspiration rate(mm/day))+8.83, $R^2$=0.59]. The decrease of the surface temperature by greening in the longer dry period was due to sun protection by the sedum canopy. The results of this study indicate that the extensive rooftop greening will assist in managing stormwater runoff and urban heat island through retention and evapotranspiration. Sedum kamtschaticum would be the ideal plant for a non-irrigated extensive green roof. The shading effects of Sedum kamtschaticum would be important as well as the evapotranspiration effects of that for the long-term mitigation effects of an urban heat island.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.3
• /
• pp.37-44
• /
• 1996

포수상태(包水狀態)의 루부라참나무(Quercus rubra) 시험편을 3가지 등온조건(等溫條件)에서 건조한 결과를 비정상상태(非正常狀態)의 확산(擴散)모델로 추정한 결과와 비교하였다. 표면이 충분히 젖은 상태인 건조초기에는 불안정(不安定)한 확산현상(擴散現象)이 관찰되었으나, 함수율(含水率)별 건조속도의 변이를 Fick's의 확산법칙과 비교할 때 유사한 형태를 보였다. 실험에서 얻은 건조조건별 건조곡선은 확산모델의 수치해석(數値解析) 결과와 거의 일치하였으며, 같은 평위함수율(平衛含水率) 조건에서 건조온도의 증가는 목재표면 보다 내부의 함수율 변화에 더 크게 영향하여 결과적으로 낮은 온도에서의 건조조건이 목재 내의 수분경사(水分傾斜)를 급하게 하는 것으로 밝혀졌다. 본 연구를 통해 목재 건조 중의 내부에 발생하는 수분경사를 추정하는데 비정상상태의 확산모델이 모든 함수율 범위에 걸쳐 유용하게 사용될 수 있음이 밝혀졌다.

• The Journal of Engineering Geology
• /
• v.18 no.2
• /
• pp.185-190
• /
• 2008

Nine wells have been developed for uses of thermal waters at the Icheon hot spa area. Drilling depths of those hot spring wells range from 166 to 294 m and their piezometric heads are located at about 50 m below the surface. Using the differences between the surface and bottom temperatures within all boreholes, we can simply estimate geothermal gradient in this area. Thus, we obtained the highest, lowest and average gradient values as $64^{\circ}C/km$ from SB-2 well, $45^{\circ}C/km$ from SB-1 well and approximately $54.28^{\circ}C/km$, respectively. However, observing the MRD-2 well additionally drilled into the depth of 996 m, we found out that this study area has widely experienced the temperature disturbance due to thermal groundwater penetration through the fracture systems within the depth of 720 m. Unlikely this phenomenon, we can conclude that the groundwater flow below the depth of 720 m does not exist. Therefore, using only those temperature data below the 720 m depth, we can estimate reasonable geo-thermal gradient values as $33^{\circ}C/km$ in this study area. Pumping test shows that outflowing temperature is $36^{\circ}C$ corresponding to the temperature logging data at 720 m depth.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.6 no.2
• /
• pp.202-209
• /
• 2005

This study concerns the performance of boiling heat transfer in inclined thermosyphons with internal grooves. A study was carried out with the performance of the heat transfer of the inclined thermosyphon having 60 internal grooves in which boiling and condensation occur. A plain thermosyphon having the same inner and outer diameter as the grooved thermosyphon is also tested for comparison. Distilled water, methanol and ethanol have been used as the working fluid. The inclination angle, three working fluids, heat flux and the boiling heat transfer coefficient at the evaporator zone are estimated from the experimental results. The experimental results have been assessed and compared with existing correlations. Imura's and Kusuda's correlation for boiling showed in good agreement with experimental results within ${\pm}20%$ in plain thermosyphon. The high heat transfer coefficient was found between $25^{\circ}$ and $30^{\circ}$ of inclination angle for water and between $20^{\circ}$ and $25^{\circ}$ for methanol and ethanol. The relatively high rates of heat transfer have been achieved in the thermosyphon with internal micro grooves.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.4 no.3
• /
• pp.262-275
• /
• 1994

SiC/C functionally gradient materials (FGM) were deposited on the graphite substrate by the chemical vapor deposition method. The best deposition conditions of SiC/C FGM were $1300^{\circ}C, H_2/[SiCl_4+CH_4]=10, CH_4/[$SiCl_4+CH_4]=0.5-0.6$. Despite of discontinuous input gas ratio change, the FGM of which composition was continuously changed could be obtained and continuous structural change without definite interfaces was confirmed by the SEM observation.

• Journal of Navigation and Port Research
• /
• v.42 no.4
• /
• pp.283-290
• /
• 2018

Due to the environmental factors of the sea, ship accidents always contain an inclination angle. The change in the ship affects not only the evacuation speed of passengers but also the fire growth in the ship. For this reason, when analyzing the fire, it is necessary to analyze the risks by considering conditions of inclination. In this study, the temperature that affects the fire was calculated by alteration of ship's heel and trim angle and analyzed using FLUENT. Based on fire occurrence position, evacuation should be done within 37 seconds under the condition of $-10^{\circ}$ heeling angle and 36 seconds under the condition of $-10^{\circ}$ trim angle. However, it was predicted that the evacuation will not be affected under the conditions of $+10^{\circ}$ heel angle and $+10^{\circ}$ trim angle. For these reasons, it is confirmed that when the ship is on fire, evacuation measures should be considered based on the heel and trim conditions as per the location of the fire.

• Journal of Power System Engineering
• /
• v.5 no.1
• /
• pp.27-34
• /
• 2001

관 외벽에 낮은 핀을 가진 수직 및 경사 열사이폰의 열전달 성능에 관한 실험적인 연구를 하였다. 관 외벽에 낮은 핀을 가진 이상밀폐 열사이폰의 열전달 성능을 비교 분석하기 위하여 동일한 규격의 평관에서도 실험적인 연구를 하였다. 작동유체는 증류수와 CFC-30을 사용하였다. 열사이폰의 경사각과 자동온도를 변화시키면서 실험한 결과 경사각의 변화에 따라 열사이폰의 열전달 성능은 큰 변화를 나타내었다. 그리고 평관으로 제작한 열사이폰보다 관 외벽에 낮은 핀관을 가진 동관으로 제작한 열사이폰의 열전달 성능이 높게 나타났다. 그리고 열사이폰의 경사각이 $20{\sim}50^{\circ}$ 범위에서 열전달 성능이 높게 나타났다.