• Korean Journal of Optics and Photonics
• /
• v.1 no.2
• /
• pp.204-209
• /
• 1990

The temperature variation at a laser rod center induced by high repetetion rate pumping was measured by counting the number of inteference frigne shift and found to be consistent with the theoretical value obtained from heat diffusion equation. The spatial homogeneity and energy transfer rate of flashlamp pumping by the single elliptical reflector plated with gold were evaluated by measuring interference fringes oever the cross section of a Nd:YAG laser rod.

• Journal of the Korean Geosynthetics Society
• /
• v.12 no.1
• /
• pp.83-92
• /
• 2013

Backfill material with thermal resistivity which has $50^{\circ}C$-cm/Watt in wet and $100^{\circ}C$-cm/Watt in dry is requested to improve the power transfer capability for dissipation of heat production in underground power cables. In the field test performed by buried cable backfills, the backfill material developed from this study is compared with river sand and weathered soil (native soil) to investigate the effect of heat transfer in various seasons and locations of thermal sensors. As a result, the developed backfill material is faster approaching yielding temperature (critical heat) than that of river sand and weathered soil, and it has good dissipation capacity rather than other materials by keeping moisture content at dry season.

• Journal of Environmental Impact Assessment
• /
• v.32 no.3
• /
• pp.176-186
• /
• 2023

Urban Heat Island (UHI) is caused by an energy imbalance in urban areas, where building design and land cover contribute to its amplification. To mitigate UHI, increasing green space is one of the well known and the most effective approach. This study aims aimed to identify specific components of green spaces that lower temperatures and demonstrate the cooling effects based on their size and composition. Forests within green spaces have had a greater impact on temperature reduction due to shading and blocking solar radiation. Although lakes also contributed to temperature reduction, the effect to cooling intensity was not significant. The cooling distance does not depended on green space size or composition. The study emphasizes that initial temperature has a strongerinfluence on cooling intensity than green space size, highlighting the importance of vegetation type within green spaces to achieve a cooling effect. These findings provide valuable insights for urban planning and the design of green spaces to mitigate the effects of the urban heat island.

• Journal of Acupuncture Research
• /
• v.29 no.1
• /
• pp.9-14
• /
• 2012

목적 : 뜸 연소 실험을 통해 간접구의 일종인 온구기의 연소 특성을 조사하였다. 방법 : 온구기를 유리판 위에 놓고 연소하여 50분간 온도 데이터를 수집하였다. 총 20개의 뜸봉을 연소하여 수집된 데이터를 분석하여 평균 온도, 최고 온도, 최고 온도 도달 시간, 최고 온도 지속 시간을 계산하였다. 또 혈류량을 증가시킨다고 보고된 온도($38^{\circ}C$)에 도달하는 시간, 그 이상의 온도로 지속되는 시간, C-fiber의 활성화를 통해 치료효과를 나타내는 것으로 보고된 온도($42-50^{\circ}C$)에 도달하는 시간과 그 범위 내의 지속시간을 계산하였다. 결과 : 평균 최고온도는 $50.4^{\circ}C$이고 평균 도달시간은 1,007초, 평균 지속시간은 27초였다. 평균최고 온도는 보고된 다른 간접구와 유사하였으나 평균 도달시간은 더 길었다. $38^{\circ}C$에 도달하는 평균시간은 410초이고 지속 시간은 1,813초였다. $42-50^{\circ}C$에 도달하는 평균시간은 521초이고 지속시간은 990초였다. 결론 : 온구기는 연소 특성이 보고된 다른 종류의 뜸보다 더 오랜 시간 동안 안정적인 열자극이 가능하여, 뜸치료의 임상 활용의 폭을 높일 수 있을 것으로 사료된다.

• Journal of the Korean Magnetics Society
• /
• v.8 no.1
• /
• pp.21-26
• /
• 1998

The temperature dependence of the magnetoimpedance (MI) effect is important both for scientific study and for thermal stability of MI sensor. We have performed the measurement of MI effect in amorphous $Co_{66}Fe_1Ni_1B_{14}Si_{15}$ (Metglas 2714 A) ribbon from a cryogenic chamber where the temperature of the sample can vary from 10 K to 300 K. The ac current was fixed at 10 mA for all measured frequencies ranging from 100 KHz to 10 MHz. The magnetoimpedance ratio (MIR) was revealed the drastic increment as a function of MIR (T) = MIR (0) exp(cT$^2$) where c is a constant. The measured MIR values at room temperature are usually 2-3 times larger than the data measured at 10 K for all measured frequencies. However, the shapes of the MIR curves are remained. This result shows the potential application of the MI effect for a temperature sensor. The frequency dependence of MIR has shown the typical tendency where the maximum values of MIR are increasing ans also the shapes of MIR curves are getting broader as the measured frequency increases.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.3
• /
• pp.206-212
• /
• 2011

It was investigated the hardness and dimensional stability of heat-compressed wood by compression temperature and time. The surface hardness of heat-compressed wood increased with increasing compression temperature. The lowest hardness value (5.0 N/$mm^2$) was observed in the temperature $70^{\circ}C$ while the highest value (15.6 N/$mm^2$) was obtained in compression temperature $220^{\circ}C$. Dimensional recovery test results showed that fixation of compression set improved with increasing compression temperature. However, the fixation effects were negligible by press time. Contact angle increased with increasing press temperature and time.

• Journal of the Korean Ceramic Society
• /
• v.37 no.10
• /
• pp.938-943
• /
• 2000

TiCl$_4$, 물 및 1-propanol의 혼합용액으로부터 미립 TiO$_2$분말 제조시, 1-propanol과 물의 부피비, 반응온도, 반응유지시간 및 TiCl$_4$mole 농도에 따른 분말 특성 및 결정상 생성에 대해 조사하였다. 반응온도가 3$0^{\circ}C$ 이상일 때 Ti 수화물의 초기 침전이 생성되었고 반응온도가 TiCl$_4$mole 농도가 증가함에 따라 입자크기는 증가하였고 $600^{\circ}C$ 하소시 1-propanol과 물의 부피비가 2보다 크고 반응온도가 7$0^{\circ}C$보다 낮을 때 주결정상은 anatase였다. 입자크기가 미세하고 입자크기 분포가 좁은 범위를 갖는 조건은 1-propanol과 물의 부피비가 2, 반응온도가 7$0^{\circ}C$, TiCl$_4$mole 농도가 0.2 mole/ι일 때였으며, 결정상의 생성은 1-propanol과 물의 부피비가 2, 반응온도가 3$0^{\circ}C$ 이상일 때 anatase에서 rutile로 전이하는 온도가 높아졌다. 이와 같은 반응인자에 따른 효과는 용매의 유전상수, 티타니아의 용해도, 입자의 표면전위 등의 효과와 관계가 있었다.

• Korean Journal of Optics and Photonics
• /
• v.19 no.3
• /
• pp.224-228
• /
• 2008

A highly sensitive integrated photonic temperature sensor was proposed and developed incorporating a polymeric microring resonator. The change in the ambient temperature was estimated by observing the shift in the resonant wavelength of the resonator induced via the thermooptic effect. For the purpose of enhancing its sensitivity, the sensor was built by implementing a polymeric resonator exhibiting a high thermooptic coefficient on a silicon substrate with a small coefficient of thermal expansion. For the range of from $20^{\circ}C$ to $30^{\circ}C$ near the room temperature, the fabricated sensor yielded a sensitivity of as high as 165 ${\pm}/^{\circ}C$ and a resolution of better than $0.1^{\circ}C$. And its performance was found to be hardly affected by the variation in the refractive index of the target analyte, which was applied to the surface of the sensor. It is hence expected that the sensor could be integrated with other refractormetric optical sensors, thereby compensating for the fatal error caused by the change in the ambient temperature.

• Magazine of the Korea Concrete Institute
• /
• v.10 no.4
• /
• pp.195-204
• /
• 1998

Generally, in order to maintain high strength in concrete, it needs high cement content and low water-cement ratio.makes internal temperature rising after concrete placing inevitably, and happens temperature stress that makes initial cracks of concrete structure. Therefore, to control the thermal stress of high-strength concrete, we made 3 types of the fineness of ground granulated blast-furnace slag and 4 steps replacement. and then measured an amount of temperature rising and elapsed time of maximum temperature and strength of concrete. Also we considered the test results of heat evolution amount and heat evolution of cement paste made with 5 steps replacement by GGBF slag.As result of this study, in case of the 50% of replacement and the 6,000$\textrm{cm}^2$/g of fineness, we obtained satisfactory results that not only the controlled effect of temperature rising but strength at early ages.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.5
• /
• pp.554-560
• /
• 2021

CRUD (chalk river unidentified deposits) is a porous material deposited on the surface of nuclear fuel during nuclear power plant operation. The CRUD is composed of metal oxides, such as iron, nickel, and chromium. It is essential to investigate the effects of the CRUD layer on the wall heat transfer between the nuclear fuel surface and the coolant in the event of a nuclear accident. CRUD only negatively affects the temperature of the nuclear fuel due to heat resistance because the effects of the CRUD layer on two-phase boiling heat transfer are not considered. In this study, the physical property models for the porous CRUD layer were developed and implemented into the SPACE code. The effects of boiling heat transfer models on the peak cladding temperature and quenching were investigated by simulating a reflood experiment. The calculation results showed some positive effects of the CRUD layer.