• Proceedings of KOSOMES biannual meeting
• /
• 2018.06a
• /
• pp.86-86
• /
• 2018

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.68 no.4
• /
• pp.246-261
• /
• 2023

We investigated critical temperature for early marginal transplanting (CT-EMT) of the contemporary japonica rice varieties in Korea through the field, pot seedling tray, and the phytotron experiments during 2020 to 2023. The lowest mean temperature for 10 days from transplanting (MT-10DFT) that resulted in earlier heading date was 12.4℃ and the highest MT-10DFT that did not show the earlier heading date was 12.0℃ in the field study when the MT-10DFT varied by changing transplanting date. The lowest MT-10DFT that induced the increased biomass but not the earlier heading date was 11.6℃ and the highest MT-10DFT that showed neither the increased biomass nor the earlier heading date was 11.4℃. Compared to the 10-day later transplanting, the dates of the first root development, initiation of the chlorophyll recovery, and the first tiller development were earlier when the MT-10DFT was 9.1℃ or higher, 10.5℃ or higher, and 11.6℃ or higher, respectively, in the pot seedling tray and field experiments. The earliness of the first tiller development was a practical index for the estimation of CT-EMT during the early growth stage of rice. The response of transplanted rice to temperature treatments with the diurnal change of 10℃ in the phytotron study was similar to that shown in the field study. The data shown for constant temperature without a diurnal change revealed that the extent of positive effects of high temperature at day-time was greater than the extent of negative effects of low temperature at night-time on the early growth of transplanted rice. It was concluded that the critical MT-10DFT for early marginal transplanting of japonica rice in the temperate environments was between 11.4 to 11.6℃ based on the plant growth and between 12.0 to 12.4℃ based on the plant development.

• Korean Journal Plant Pathology
• /
• v.12 no.3
• /
• pp.307-315
• /
• 1996

토마토 잎에 집적된 triflumizole 잔류량 동태에 미치는 온도 영향과 Cladosporium fulvum에 대한 triflumizole의 살균효과를 구명하였다. 8주간 키운 토마토 식물체에 triflumizole을 분무 살포한 후 식물생장용 항온실에서 키우면서 4가지 온도 조건을 처리하였다. 주기적으로 토마토 잎을 채취하여 HPLC 방법을 이용하여 triflumizole의 잔류량을 조사하였다. Triflumizole 잔류량의 경시적 동태는 약제살포후 적산온도를 독립변수로 사용하는 지수적 감소 몸형으로 나타낼수 있었으며, 이는 triflumizole의 잔류성이 온도 영향을 크게 받는다는 것을 뜻한다. 경기도 농촌진흥원에 위치한 토마토 비닐하우스에서 수행한 실험에서 얻은 자료를 이용하여 평가한 결과 이 모형의 타당성이 인정되었다. Triflumizole의 약효에 대한 in vitro 실험 결과, 이 살균제는 C. fulvum의 균사 생장과 포자형성을 뚜렷이 억제하였으며, 잎곰팡이병 방제를 위해서는 토마토 잎에 집적된 triflumizole 잔류량이 최소한 10 ppm 이상이 되어야 할 것으로 추측된다. 본 연구에서 연구된 지수적 감소 모형은 토마토 잎에 집적된 triflumizole 잔류량을 추정하는데 활용될 수 있으며, 실용적인 측면에서 볼 때, 토마토 잎곰팡이병을 효과적으로 방제하는데 필요한 triflumizole의 최소 잔류량을 식물체에 유지하기 위하여 triflumizole을 살포해야 할 시기를 결정하는데 활용될 수 있다.

• Korean Journal of Materials Research
• /
• v.4 no.3
• /
• pp.295-300
• /
• 1994

This paper is aimed to study the effect of Pd activator, the annealing temperature, and operating temperatures on the response characteristics of the $SnO_2/Al_2O_3$ sensor. The resistance of device has shown minimum value when annealing temperature and operating temperature of device are $550^{\circ}C$ and $350^{\circ}C$ respectively in ethanol gas. And the response characteristics of the device showed the best results when lwt% Pd was added to SnOz especially in low concentration of ethanol gas.

• Journal of Animal Environmental Science
• /
• v.1 no.2
• /
• pp.125-136
• /
• 1995

To use the earth heat for the pig housing, an underground heat exchanger has constructed in depth of 2.5m and 20m length. The temperature of the outlet air was max. 8 kelvin higher than that of inlet air in winter season. In spite of the -7$^{\circ}C$ outside temperature, it could keep the air temperature from the earth tube above zero degree. The heating performance was maximum in value of 3.25Wh/㎥ and average of 1.75Wh/㎥ by the airflow volume of 340㎥/h. The slope of relative humidity from outlet air has shown gentler than that of inlet air. By using the underground heat exchanger, it would be possible to prepare an relatively uniform relative humidity in the swine stalls. The temperatures on the earth, where PVC pipes are buried, have shown 10~12$^{\circ}C$ on March. This can reduce the difference between day and night temperature during this season by using the underground heat exchanger.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 1999.07a
• /
• pp.47-55
• /
• 1999

고온온열치료는 radiofrequency, ultrasound , microwave, 원적외선 등을 이용하여 신체의 부분 혹은 전신을 4$0^{\circ}C$ 이상으로 가열하여 암을 치료하는 방법이다. 우리나라에 도 입된 15기의 기계중 현재까지 사용되고 있는 것은 대부분이 radiofrequency를 사용하는 기 계이며 현재 고신의대, 동아의대, 부산메리놀병원, 여의도 성모병원, 영남의대, 전주예수병원 등에서 환자치료에 사용하고 있다. 고온 온열치료제(hyperthermia)는 직접 암세포를 죽이는 작용, 방사선치료나 항암제치료와 병행하여 그 효과를 증강시키는 작용으로 크게 나눌수 있 다. 직접 암세포를 죽이기 위하여는 43$^{\circ}C$이상의 고온을 사용하여야 하나 인체에서는 42.5$^{\circ}C$ 이상으로 가온하기가 쉽지않아 4$0^{\circ}C$~42$^{\circ}C$ 정도의 온도에서 방사선 치료나 항암제 치료효과 를 증진시키는 작용을 임상에서 주로 사용하고 있다. 특히 방사선 치료와 병합 사용시 그 효과가 뛰어나 간암, 난소암, 대장 직장암, 식도암, 위암, 자궁암, 전립선안, 췌장암, 폐암등, 거의 모든 암에서 부작용을 증가시키지 않으면서 그 효율을 1.1-6.14배나 증가시킨다고 보 고되고 있어 지난 10여 년간 제자리걸음을 하고 있는 암의 치료에 희망을 주고 있다. 방사 선 치료와 병합시 효과를 증대시키는 기전은 1)세포의 핵 합성기 (S-phase)는 방사선 치료 에는 매우 저항력이 강하여 잘 죽지 않으나 고온온열치료에는 예민함으로 암세포는 정상조 직에 비해 산소가 부족하여 염기성대사(anaerobic metabolism)를 많이 함으로 그 부산물인 유산 (lactic acid)이 많이 생성됨으로 정상조직보다 pH가 낮아 암 조직이 정상조직에 비해 고온온열치료에 더 잘 듣는 원인이 된다. 3) 영양이 부족한 상태의 세포는 고온온열치료에 훨씬 예민하다. 4) 암조직은 혈관상태가 정상조직에 비해 좋지 않음으로 정상조직보다 쉽게 가온이 되며, 일단 가온된 온도는 잘 식지 않음으로 정상조직에 비해 훨씬 효율적이다. 5)고 온온열치료는 4$0^{\circ}C$~43.5 $^{\circ}C$정도에서만 이 작용이 일어남으로 정상인체에서 43$^{\circ}C$이상의 가온 은 쉽지 않음으로 이 효과는 암조직에서 주고 일어나게 된다. 6)고온온열치료는 방사선치료 후에 생기는 손상의 재생을 억제함으로 방사선의 치료효과를 높인다. 7)38.5$^{\circ}C$~41.5$^{\circ}C$의 낮 은 온도에서도 암조직의 산소 상태를 호전시켜 방사선 치료효과를 증대시키는 역할을 한다.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.489-496
• /
• 2004

The effect of airconditioning and heating system when aircurtains installed in subway electrical rolling stock at entrance door. It blocks cold/hot air of outside. It is good for health with its blocking effect against dusts exhaust fumes, odor bugs and smoke from outside. It always maintains clean and pleasant atmosphere inside. It helps you to have health with its ever-equal temperature distribution at inside. It saves lots of maintenance cost for heating/cooling (about 86$\%$) since it cuts the loss of hot air under heating as well as of cold air under air-conditionin. Customers can feel pleasant go in and out (better than before) with the door. It is an indispensable product for the employers to cut the cost. It makes customers feel pleasant near doors, since it isnt influenced by temperature difference of cold/hot air when the door opens/closes. In electrical rolling stock passenger temperature is a lot different from that the door opens/closes. One of the main aims is to create an acceptable thermal environment without draught problem. Temperature, gradients when aircurtains installed in subway electrical rolling stock at entrance door have been studied. And the temperature measured at 0.1, 0.5, 1.3, 1.7m above the floor. It has been found that temperature, with large fluctuations caused more draught influence.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.4
• /
• pp.75-83
• /
• 2013

This paper presents a series of test result in order to study fire resistance capacity of the Near-Surface-Mounted (NSM) Carbon Fiber Reinforced Polymer (CFRP) plate, which are tensile test of CFRP under various temperature loading, temperature loading test of epoxy and bond test of NSM CFRP to concrete under various temperature loading. From the tests, it was found that NSM retrofit method had high efficiency in strengthening concrete under ordinary temperature. However, the strength of the system was able to be drastically decreased even a little increase of surrounding temperature. Especially, bond capacity begins to disappear when the surrounding temperature approaches the glass transition temperature of epoxy. Therefore, it is necessary to improve the fire resistance capacity of both fiber reinforced polymer reinforcement and epoxy for bonding in order to develop safe fire resistance design of structure.

• Composites Research
• /
• v.36 no.5
• /
• pp.342-348
• /
• 2023

There has been increasing demand for real-time monitoring of body and ambient temperatures using wearable devices. Graphene-based thermistors have been developed for high-performance flexible temperature sensors. In this study, the temperature coefficient of resistance (TCR) of monolayer graphene was controlled by coating polyethylenimine (PEI) on graphene surfaces to enhance its temperature-sensing performances. Monolayer graphene grown by chemical vapor deposition (CVD) was wet-transferred onto a target substrate. To facilitate the interfacial doping by PEI, the hydrophobic graphene surface was altered to be hydrophilic by oxygen plasma treatments while minimizing defect generation. The effect of PEI doping on graphene was confirmed using a back-gated field-effect transistor (FET). The CVD-grown monolayer graphene coated with PEI exhibited an improved TCR of -0.49(±0.03) %/K in a temperature range of 30~50℃.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.2
• /
• pp.212-216
• /
• 2010

Dynamic Thermal Management (DTM) degrades the processor performance for lowering temperature. For this reason, reducing the peak temperature on microprocessors can improve the performance by reducing the performance loss due to DTM. In this study, we analyze various unit selection techniques for computation migration. According to our simulation results, dynamic computation migration based on the thermal difference between the units shows best performance among compared models.