• Korean Journal of Ecology and Environment
• /
• v.46 no.3
• /
• pp.395-408
• /
• 2013

Environmental condition can induce changes in early life-history traits in order to maximise the ecological fitness. Here I investigated how temperature change and variation in human aquatic activity/behaviour affect early life-history consequences in fish using a dynamic-state-dependent model. In this study, I developed a general fish's life-history model including three life-history states depend-ing on foraging activity, such as body mass, mass of reproductive tissue (i.e., gonadal development) and accumulated stress (i.e., cellular or physiological damage). I assumed the level of foraging activity maximises reproductive success-ultimately, fitness. The model predicts that growth rate, development of reproductive tissues and damage accumulation are greater in higher temperature whereas higher human aquatic activity rapidly reduced the growth rate and development of reproductive tissue and increased damage accumulation. While higher foraging activity in higher temperature is less affected by human aquatic activity, the foraging activity in lower temperature rapidly declined with human aquatic activity. Moreover, lower survival rate in higher temperature or human aquatic activity was independent on mortality rate due to human aquatic activity or mortality rate when foraging activity, respectively. However, the survival rate in lower temperature or human aquatic activity was dependent on these mortality rates. My findings suggest that including of early life-history traits in relation to climate-change and human aquatic activity on the analysis may improve conservation plan and health assessment in aquatic ecosystem.

• Korean Journal of Materials Research
• /
• v.7 no.10
• /
• pp.845-850
• /
• 1997

수직형 FHD증착법을 사용하여 SiO$_{2}$, SiO$_{2}$-P$_{2}$O$_{5}$, SiO$_{2}$P$_{2}$O$_{5}$-B$_{2}$O$_{3}$-GeO$_{2}$계 실리카 유리미립자를 형성하였으며, SEM, ICP-AES, XRD, TGA-DSC을 사용하여 그 특성을 분석하였다. XRD측정을 통해, 미립자 형성시 사용된 화염온도(130$0^{\circ}C$-150$0^{\circ}C$)와 기판온도(-20$0^{\circ}C$)가 SiO$_{2}$-P$_{2}$O$_{5}$계 미립자를 비정질상태로 형성하였으며, SiO$_{2}$P$_{2}$O$_{5}$-B$_{2}$O$_{3}$와 SiO$_{2}$P$_{2}$O$_{5}$-B$_{2}$O$_{3}$-GeO$_{2}$계 미립자에서는 B$_{2}$O$_{3}$, BPO$_{4}$, GeO$_{2}$의 결정성피크들을 관찰하였다. TGA-DSC 열분석을 통해, SiO$_{2}$와 SiO$_{2}$-P$_{2}$O$_{5}$는 온도변화에 따른 질량변화가 없었으며, SiO$_{2}$P$_{2}$O$_{5}$-B$_{2}$O$_{3}$-GeO$_{2}$계의 경우 질량감소를 동반한 유리전이에 따른 분자이완현상 및 결정화나 회복반응을 나타내고 있다. 질량감소는 미립자가 결정상태일때 가속되는 경향을 나타냈으며, DSC열분석을 통해 SiO$_{2}$, SiO$_{2}$-P$_{2}$O$_{5}$, SiO$_{2}$P$_{2}$O$_{5}$-B$_{2}$O$_{3}$-GeO$_{2}$계 유리미립자들의 고밀화가 시작되는 온도를 각각 1224$^{\circ}C$, 1151$^{\circ}C$, 953$^{\circ}C$, 113$0^{\circ}C$에서 관찰하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.1
• /
• pp.322-328
• /
• 2012

This paper deals with a digital Desoldering system for removing lead-free solder. We proposed a Desoldering system that is to cope with the changed work environment of the solder materials changing from lead solder to lead-free solder, we can be quickly stable to the set temperature, and continuous operation is possible. Proposed system consists of a Desoldering station and a Desoldering gun. For the PID temperature control, we designed the 8bit MCU peripheral circuit. We had a few experiments to confirm the performance of the proposed system, and compared with the specification of same kind of imports. As a result, proposed system than the imported products showed good performance as follows: the time to reach operating temperature is 11 seconds faster, ripple temperature variation is $1.5^{\circ}C$ lower, temperature recovery rate is about $0.14^{\circ}C$/sec faster.

• Korean Journal of Food Science and Technology
• /
• v.17 no.3
• /
• pp.141-145
• /
• 1985

In the present study, an attempt was made to investigate the characteristics of rheological properties of a themally oxidized soybean oil. Various flow curves of the oxidized oils were obtained using a broad range of shear rate (452-904 rpm). The flow curves showed the characteristics of thixotropic flow, and as temperature decreased (range : 13-$37^{\circ}C$) they demonstrated increasingly stronger thixotropic properties. A thixotropic slope similar to the coefficient of thixotropy as applied to the rheological characteristics of the thermally oxidized soybean oil to predict its rheological properties quantitatively at an equilibrium state. The empirical formula with the thixotropic slope was found satisfactory in predicting the Non-Newtonian behavior of the thermally oxidized soybean oil.

• Korean Chemical Engineering Research
• /
• v.52 no.1
• /
• pp.98-105
• /
• 2014

Lysozyme amounts to 0.3% in egg white and functions as an agent of cell lysis and activator of tissue reconstruction. Ion exchange chromatography is the most useful method of separation among affinity chromatography, ion exchange chromatography, and ultra-filtration. The aim of present study is to find the optimum pH and temperature for the separation of lysozyme in egg white within cation exchange gel filled glass column. And we compared results of experiments with those of simulations. Phosphate buffer was used, and pH and temperature were varied as 5~7 and $25{\sim}40^{\circ}C$ respectively. RP-HPLC was the tool for the retention time identification and quantitative analysis of lysozyme. OriginPro 8 measured the peak area of lysozyme chromatogram and quantified the eluted lysozyme. Largest amount of lysozyme was separated under the conditions of pH 5 and T $25^{\circ}C$.

• Korean Journal of Environment and Ecology
• /
• v.12 no.1
• /
• pp.9-13
• /
• 1998

Because Lysimachia mauritiana is not able to maintain the seed viablity for a long time, it has difficulties in using for the ornamental plants or landscape gardening. This study was conducted to elucidate the optimal germination conditions of Lysimachia mauritiana seeds. The germination rate of the seeds was higer in light condition than in dark one. In experment determining the proper germination temperature, the germination rates were 2.2%, 96.9% and 91.2% under 35$\circ $C, 25$\circ $C, and 20$\circ $C, respectively in light condition. The approprate temperature for the germination was 25$\circ $C in light. The decreases of germination rate with the increase of the preservation periods was able to recover by priming pretreated with NaCl solution and KNO$_{3}$ + K$_{3}$H$_{2}$PO mixed solutions. When the storage period was 300 days, the germination rate was 75% without priming treatments. But the seeds primed with NaCl 0.1M and KNO$_{3}$ + K$_{3}$H$_{2}$PO mixed solutions 0.1M, showed germination rate above 90%. T$_{50}$ also was shorten from 5.25 without priming to 3.78 with NaCl 0.1M. Seed priming may induce earlier sprouts and increase germination rate of long-preserved seeds of native wild plants.

• Journal of Aquaculture
• /
• v.10 no.3
• /
• pp.281-288
• /
• 1997

We investigated the optimal concentratin of ethyl-p-aminobenzoate for the exfoliation and recovery of young abalone, Haliotis discus hannai in according to different water temperatures, for the purpose of preventing the damage of shell and muscle to ecfoliated from shelter. In the 14$^{\circ}C$ water temperature, young abalones were exfoliated after 16, 35, 35 and 35 minutes in 150, 100, 75 and 50ppm concentration of ethyl-p-aminobenzoate, and were recovered after 100, 60, 30 and 30 minutes, respectively. Exfoliation rate of abalone were 100% except for 50 ppm (80%) and recovery rate were 100% of all concentration. In the $18^{\circ}C$ water temperature, young abalones were exfoliated after 4, 4, 6, 8, 8 and 12 munutes in 300, 200, 150, 100, 75 and 50ppm concentration of ethyl-p-aminobenzoate, and were recovered after 210, 180, 90, 60, 30, 20 and 20 minutes, respectively. Exfoliation rate of abalone were 100%, and recovery rate were 100% except for 200 and 300ppm (90%). In the $24^{\circ}C$ water temperature, young abalones were exfoliated after 8, 10, 10 and 12 minutes in 150, 100, 75 and 50ppm concentration of ethyl-p-aminobenzoate, and were recovered after 70, 50, 30 and 20 minutes, respectively. Exfoliation and recovery rate of abalone were 100%. In the 18$^{\circ}C$water temperature, exfoliation rate that treated with freshwater during 20 minute were 80, 50, 30 and 5% in 100, 75, 50 and 25% of fresh water, and recovery after 60, 15, 10 and 2 minutes, respectively and recovery arate were 100% except of r 100% freshwater. In this study, we suggest the reslults that the exfoliation and recovery by ethly-p-aminobenzoate were more effected in $18^{\circ}C\;and\;24^{\circ}C$ of sea water temperature than those of $14^{\circ}C$. The optimal concentration of ethyl-p-aminobenzoate was 50ppm at those water temperature. We raised 20 individual of young abalones at water temperature of $16^{\circ}C$ in the 1$\ell$ o ftnk and checked the variatin of dissolved oxygen (DO) by respiration of abalones that treated with 75ppm of ethyl-p-aminobenzoate. Before anesthetizion, DO were 6.17~6.20mg/$\ell$ and slowly decreased. But after 60 minutes, DO decreasing were stopped in 5.42~5.46mg/$\ell$. On the other hand, the control was continuously decreased and 5.27mg/$\ell$ after 60 minutes. The heartbeats of abalones were 33~45/minute in the water temperature of $18^{\circ}C$, but that treated with 100 ppm concentration of ethyl-p-aminobenzoate during 60 minutes, was 0/minute. And heartbeats of recovered abalones from anesthetizion were 29~43/minute.

• Membrane Journal
• /
• v.26 no.1
• /
• pp.70-75
• /
• 2016

The reuse of wastewater is being diffused to manage and develop the water resources. Generally, the treated wastewater is discharged to the river after being treated to meet the effluent quality standard or reused for diverse uses through the reprocessing. And recently, as the reuse of the treated wastewater is activated, the technologies to utilize for the high quality water resources such as industrial water by reusing the wastewater with Membrane Distillation (MD) are under development. In this study, the direct contact membrane distillation (DCMD) process has been applied to treat sewage discharge water for water reuse. The laboratory scale experiment was performed by using a hydrophobic PVDF membrane with the pore size of $0.22{\mu}m$. The influence of operating parameters, such as feed temperature, feed flow rate, feed concentration, on the permeate flux and rejection has been investigated. All filtration tests were conducted till the feed volume reached a concentration factor of 3.0. Thus, the operating period ranged between 19 hr and 49 hr depending on filtration performance. The results showed that above 92% of TN, TP, COD and TOC in the feed could be rejected regardless of an operating condition. The water flux was ranged from 13.8 to 20.3 LMH. The lowest flux was obtained at the operating condition with the feed temperature of $50^{\circ}C$ and feed flow velocity of 500 mL/min while the highest one was measured with $60^{\circ}C$ and 900 mL/min. When the concentration factor reached 3.0, water flux declined by approximately ranged from 14.5% to 33.3%. But the fouling in MD is almost fully reversible, with more than 90% recovery of permeate water flux following a DI water rinse without the addition of chemical cleaning reagents.

• Korean Journal of Materials Research
• /
• v.9 no.11
• /
• pp.1137-1143
• /
• 1999

Microstructure and mechanical properties of Mod.9Cr-1Mo and W added 9Cr-0.5Mo2W steels were investigated for liquid metal reactor (LMR) heat exchange tube. The tempering temperatures at which cell structure was formed were $700^{\circ}C$ for Mod.9Cr-1Mo steel and $750^{\circ}C$ for W added 9Cr0.5Mo-2W steel. indicating the recovery of dislocation was delayed by the addition of W. 9Cr-0.5Mo-2W steel had the same kinds of precipitates with Mod.9Cr-1Mo steel, but the W was included in the precipitates in 9Cr-0.5Mo-2W steel. Micro-hardness and ultimate tensile strength of 9Cr-0.5Mo-2W steel were higher than those of Mod.9Cr-1Mo steel. The impact property of Mod.9Cr-1Mo steel was superior to that of 9Cr-0.5Mo-2W steel.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1827-1829
• /
• 1999

반도체 소자가 고집적화 되고 미세화 될수록 좁은 면적에 여러 기능을 가진 우물을 형성시켜야하나 기존의 우물로는 고온 장시간 열처리로 인하여 측면 확산이 깊게 되고, 불순물 농도 분포는 표면으로부터 농도가 점차 낮아진다. 따라서 기존 우물의 불순물 분포로는 기생 트랜지스터에 의한 렛치-엎과 알파 입자에 의한 SER의 감소를 위하여 필요한 벌크에서의 고농도 분포를 유지하기가 곤란하다. 이러한 문제는 차세대 반도체 개발을 위해서는 반드시 해결해야 할 것이며 이것을 해결할 수 있는 공정으로는 고 에너지 이온 주입과 저온, 단시간 열처리이다. 고 에너지 이온 주입 시의 불순물 분포를 어떻게 제어할 것인가에 대한 것과 여기서 부수적으로 나타나는 격자 손상과 그 회복 및 잔류결함의 성질을 어떻게 알고 이를 게터링 등에 이용할 것이냐에 대한 것이다. 실리콘 기판 내로 가속된 이온은 실리콘 격자와 충돌하면서 많은 1차 결함이 생기고. 이들은 후속 열처리 과정에서 활성화되면서 대부분은 실리콘 격자의 위치에 들어가 활성화되고. 그 나머지는 실리콘내의 격자간 산소, 격자간 실리콘. 격자 빈자리와 상호 작용을 하여 2차 결함을 형성한다. 에피택셜 웨이퍼와 p-type웨이퍼에 비소 이온을 고에너지로 주입후 2단계 열처리에 의한 농도분포변화와 핵생성과 결함성장에 관해 실험하였고, 핵생성온도는 $600^{\circ}C$이하이고, 성장에 필요한 온도는 $700^{\circ}C$이상이다.