• The Journal of Engineering Geology
• /
• v.21 no.1
• /
• pp.45-55
• /
• 2011

We examined the interactions between surface and groundwater through (1) flowmeter logging, (2) measurements of seasonal and vertical changes in temperature within a well, and (3) geochemical analyses of water samples from nine groundwater-monitoring wells. At two wells adjacent to a stream, subsurface water was found to flow from the stream to a surrounding alluvial fan, and the seasonal change in groundwater temperature is similar to those of surface water and air. Geochemical analyses at two wells indicated hydro-geochemical features affected by streamwater inflow, showing seasonal variations. Accordingly, these two wells are located in an area with active interaction between surface water and groundwater. The Thermochron I-button used in the present study is useful for this type of study of groundwater?surface water interaction because of its low cost and small size.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.4
• /
• pp.1112-1120
• /
• 2017

Petroleum products are composed of various types of hydrocarbon compounds. Like other types of liquids, they presented the variation of density and volume according to temperature change. The method of measuring the density of petroleum products in a liquid phase is based on experimental data obtained mainly for each fractionally distilled petroleum product. In this study, the density and volume changes of kerosene and automotive diesel according to temperature change were measured and the property of change were analyzed. The conversion values were calculated using the density volume conversion table proposed by international standard ASTM. In addition, we analyzed the differences between the reference values and the measured values for the temperature changes specified in the domestic metering law.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.2
• /
• pp.123-131
• /
• 2011

Characteristics of sea surface temperature(SST) difference around Gwang-Yang steel Mill where can affect marine ecosystem in Gwang-Yang bay using 25 collected Landsat-7 ETM+ thermal infrared band data from 2000 to 2010. To analyze accuracy of SST from the Landsat-7 ETM+ thermal infrared image， satellite-induced SST was verfied by compared Yeo-Su tide station and Landsat thermal image. As a result, SST from Landsat-7 ETM+ is $1.22^{\circ}C$ lower than sea temperature from Yeo-Su tide station and correlation coefficient resulted in above 0.991 which means that correlation coefficient between Landsat image temperature and field sea temperature is relatively high. Five regions were selected to analyze sea surface temperature between near Gwang-Yang steel mill and the open sea and analyzed timeseries of sea surface temperature seasonally and regionally. Moreover, the additional analysis has been carried out by comparing the averaged temperatures of Gwang-Yang and Soon-Cheon bays using the dataset over a year.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.11 no.4
• /
• pp.315-319
• /
• 2001

A diagnosis system that provides early warnings regarding machine malfunction is very important for rolling mill so as to avoid great losses resulting from unexpected shutdown of the production line. But it is very difficult to provide e8rly w, ul1ings in rolling mill. Because dynamics of rolling mill is non-linear. This paper shows a chaotic behaviour of vibration signal in rolling mill using embedding method. Phase plane and Poincare map, FFT and histogram of vibration signal in rolling mill are implemented by qualitative analysis and Fractal dimension, Lyapunov exponent are presented by quantitative analysis.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.45-46
• /
• 2017

As the environment and energy problems such as global climate change (global warming, urban heat island phenomenon) and energy depletion have come to the fore, the construction and waterproofing industry are responding more critically to the demands of global green technology and are employing more eco-friendly technologies as of recent. In this study, the application of the waterproofing material with thermal response performance in construction buildings was investigated to confirm whether the thermal performance is being properly secured by the change of the surface temperature. Experimental results showed that the surface temperature difference between before and after the application is at least 19.8℃ at the maximum 26.3℃. When the degradation rate is converted, the degradation effect of about 40% on average was confirmed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.266-266
• /
• 2012

오늘날 도시는 인간 중심적으로 환경을 고려하지 않은 채 개발위주의 발전이 계속되고 있으며 도시화가 진행됨에 따라 도심지에 콘크리트와 아스팔트의 비율이 증가하고 농경지와 녹지가 감소하는 등 도시주변의 피복 변화가 빠르게 일어나고 있다. 이와 같이 열 환경을 고려하지 않은 도시의 급성장은 각종 인공 열과 대기오염 물질의 증가와 함께 도시상공의 기온을 상승시켜 도시의 기온이 주변 지역보다 높아지는 열섬현상의 원인이 되고 있다. 이에 따라 최근 미국, 유럽 등의 선진국을 비롯하여 아시아지역에서도 도시열섬현상 대책수립이 활발히 진행되어오고 있으며 국내에서도 열섬완화 대책 수립의 중요성이 인식되고 있다. 그러나 자연토지피복은 농경지, 나지, 수면과 같은 다양한 종류의 피복으로 구성되며 각 피복특성에 따라 도시내부에 영향을 미치는 정도가 다르게 나타나므로 도시계획에 반영될 수 있는 자연피복의 종류와 피복비율의 적정조합을 도출할 필요가 있다. 따라서 본 연구에서는 청주시를 대상으로 농경지를 포함하는 녹지의 감소, 공업단지의 증가에 따른 열 환경 영향을 분석하기 위하여 청주시의 연도별 토지피복 분포 현황과 과거 기상자료를 통해 토지피복 분포변화에 따른 온도 변화를 조사하였다. 토지피복은 농경지, 녹지, 주거지, 공업 단지 및 수역으로 분류하였으며, 대상지역의 기후 특성 파악을 위하여 청주시 총 면적에 대한 면적비율의 증감추이와 그에 따른 온도 변화를 정량적으로 파악하였다. 그 결과, 청주시는 녹지의 경우 정체 또는 감소추세를 나타낸 반면 공업단지는 지속적인 증가추세를 나타내었다.

• The Journal of the Korea Contents Association
• /
• v.5 no.6
• /
• pp.230-237
• /
• 2005

In this paper, we are suggested a method that's a major topics in sports medicine. It is disease control, control and management of chronic degenerative disease, and promotion of health. We are analyze physical activity to scientific and quantitative a trainee at Wu-Shu gymnasium, for a suggested method. We are measured a quantity of physical activity by SenseWear-PRO2-Armband which develop body-media company. Armband include to skin temperature sensor, near-body temperature sensor, accelerometer, heat flux sensor, galvanic skin response sensor. Acquired data was recorded to storage in Armband. We are analyzed using InnerView Wearer Software in the Stored data to skin temperature, calorie expenditure, quantity of physical activity. The result of this analyzed, we are know that a man of long-term exercise expenditure energy at short time and if liveliness of physical activity was Increase in expenditure energy with increase skin temperature. Also, we are know that the heat flux after increase expenditure energy with increase skin temperature. And, know that GSR was not affected a factors that physical activity, expenditure energy, increase skin temperature, and others.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.38 no.4
• /
• pp.307-315
• /
• 1989

In this paper, we have analyzed the temperature variation trend of a slab on between the process of reheating furnace and the termination of roughing mill process during hot rolling process. 1) cooling by radiation and convection current in the air, 2) plastic deformation heat, 3) cooling by descaling water, 4) cooling by contact with rolling rolls and/or transmitting rolls. For the analysis, the factors have been adopted as the problems of the rolling process to be solved such that we have established an application technique in relation to the determination of boundary conditions on the slab surface. We have presented a procedure for an analysis of the cooling phenomenon treated as a problem of two-dimensional transient heat flow using finite difference equation and suggested techniques of implementing sequentialized rolling tasks in correlation with the procedure. From the result of simulation, it is shown that the difference between calculation value and measurement value is within the range of the industrial measurement error. Also, it is proved that the assumptions, conditions, and properties used in the computer simulation is appropriate by showing that the pattern of a drop in temperature at each rolling event is in accord with real circumstances.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.8
• /
• pp.34-40
• /
• 2017

In recent years, global warming has caused abnormal weather phenomena. Unusually cold climates have occurred all around the world, including cold waves in the Northeastern United States, Beijing, China, Southern India, and Pakistan, as well as floods in Chile, Kazakhstan, and Vietnam. China has been experiencing a nationwide heat wave annually since the year 2013, especially in the southern region. In this study, we used Landsat 8 OLI TIRS sensor images from four periods to analyze the characteristics of abnormal high temperature phenomena in Cixi-si, China. Land cover classification was performed using 10 bands of satellite imagery, and the surface temperature was extracted using the 10th thermal band. The results of the land cover classification of the fourth period show the changes of the time series quantitatively. The results of the surface temperature calculation provided both the average overall temperature and the average temperature of individual items. The temperature was found to be highest for buildings, followed by grassland, forest, agricultural land, water systems, and tidal flats in the same period.

• Proceedings of the Korean Environmental Health Society Conference
• /
• 2005.11a
• /
• pp.110-114
• /
• 2005

인공적으로 디젤류에 오염시킨 5kg의 토양이 충전된 두 개의 실험 column을 이용해서 외부 온도변화 효과를 최소화하기 위해서 $25^{\circ}C{\pm}2.5$로 유지시켰으며, 유량속도도 10ml/min로 일정하게 유지시켰다. 또한 수분은 활동범위 능력의 $60{\sim}80%$에서 유지시켰다. 따라서 연속식과 간헐 주입식 모드를 운전비용의 감소 및 효율의 향상 측면에서 모드의 평가를 위한 방법으로 이용기간 동안 총세균 수, 유류분해균 수의 변화, 탈수소효소 활성도의 변화 추이 분석을 하였다. 두 venting 모드별로 본 총 종속영양균 수와 유류분해균 수는 모두 대등한 성장률을 보였으며, 반응일 수에 따라 비교된 탈수소효소 활성도 반응 90일 동안 비슷한 활성을 유지 했다.