• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.8
• /
• pp.781-788
• /
• 2013

Predicting the engine component temperature is a basic step to conduct structural safety evaluation in medium-speed diesel engine design. Recent trends such as increasing power density and performance necessitate more effective thermal management of the engine for achieving the desired durability and reliability. In addition, the local temperatures of several engine components must be maintained in the proper range to avoid problems such as low- or high-temperature corrosion. Therefore, it is very important to predict the temperature distribution of each engine part accurately in the design stage. In this study, the temperature of an engine component is calculated by using steady-state conjugate heat transfer analysis. A proper approach to determine the thermal load distribution on the thermal boundary area is suggested by using 1D engine system analysis, 3D transient CFD results, and previous experimental data from another developed engine model. A Hyundai HiMSEN engine having 250-mm bore size was chosen to validate the analysis procedure. The predicted results showed a reasonable agreement with experimental results.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.7-13
• /
• 2019

This study aims to develop a FE Model to simulate dissimilar friction stir welding and to address its potential for fundamental analysis and practical applications. The FE model is based on Coupled Eulerian-Lagrangian approach. Multiphysics systems are calculated using explicit time integration algorithm, and heat generations by friction and inelastic heat conversion as well as heat transfer through the bottom surface are included. Using the developed model, friction stir welding between an Al6061T6 plate and an AZ61 plate were simulated. Three simulations are carried out varying the welding parameters. The model is capable of predicting the temperature and plastic strain fields and the distribution of void. The simulation results showed that temperature was generally greater in Mg plates and that, as a rotation speed increase, not the maximum temperature of Mg plate increased, but did the temperature of Al plate. In addition, the model could predict flash defects, however, the prediction of void near the welding tool was not satisfactory. Since the model includes the complex physics closely occurring during FSW, the model possibly analyze a lot of phenomena hard to discovered by experiments. However, practical applications may be limited due to huge simulation time.

• Proceedings of the Korea Water Resources Association Conference
• /
• 1986.07a
• /
• pp.131-145
• /
• 1986

흐름수역에서 연직상향으로 방류되는 평면부력\ulcorner의 거동이 연속방정식, 운동량방정식 및 추적물수송식의 기본방정식에 의하여 수치적으로 해석된다. 난류확산에는 Prandtld의 혼합거리이론을 도입한 난류수송모형이 이용된다. 수치해 과정은 기본방정식을 유함수(stream function)식, 와도수송(vorticity transport)식으로 변환한 후, \ulcorner방류속도와, 방류구폭 등으로 표현되는 변수와 흐름을 지배하는 무차원 매개변수를 도입하여 무차원 형태로 표현하는 부분과 successive under-relaxation과 Gauss-Seidel반복법으로 수행하는 부분으로 이루어진다. 적절한 relaxation 계수를 선정하므로써 안정되고 수렴성이 좋은 계산이 수행된다. \ulcorner방류 속도와 가로흐름 속도의 비가 속도비(Velocity ratio)로 정의되며 속도비가 8 - 15의 범위에서 부력\ulcorner으로 인한 주변흐름수역의 속도변화 온도상승범위, 흐름상태(유선) 및 와도가 조사되었으며 \ulcorner의 경로에 대하여 속도비와 방류밀도후르드수의 영향이 또한 조사되었다. \ulcorner중심선의 속도와 온도변화, 국부밀도후르드수의 변화가 구해지며 퍼짐율(dispersion ratio), 확산비(spreading rate)가 방류밀도후르드수, 국부밀도후르드수 및 방류구로부터의 경로의 항으로 해석되었다. 또한 속도와 온도 분포에 상사(similarity)가 존재함이 밝혀졌으며 본 연구와 같은 조건의 범위에서는 Gaussian분포를 이용한 적분형해석(intergal type analysis)이 가능한 것으로 사료된다.

• Fire Science and Engineering
• /
• v.23 no.3
• /
• pp.31-39
• /
• 2009

Recently, fire resistance in high-rise building is becoming major problem socially. So it is need of hour to study on fire resistance in buildings. This study estimates fire resistance performance to utilized CFT (Concrete filled steel tube, below CFT) column in the high structure. But it is difficult quantitative evaluation about fire resistant performance of CFT. Therefore, this study made CFT specimen that determine the factor which is strength of concrete and then CFT column was exposed to heating controlled as closely as possible the ISO-834 standard fire curve. Also, tried to analyze internal temperature through nonlinear transient heat flow analysis. And, presumed extant compressive strength on the basis of this.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.753-756
• /
• 2004

최근 전자 부품으로써 널리 사용되는 압전 변압기근 고전계 구동시 야기되는 압전체의 기계적인 진동 손실 및 유전 손실에 의해 높은 온도 상승이 초래된다. 이는 압전 변압기의 동작 특성 변화를 일으키며 결국 안전 변압기의 공진 주파수의 변화 및 효율의 감소 등 비선형성의 원인이 된다. 본 논문에서는 유한 요소법을 이용한 압전 변압기의 공진 특성을 해석하였으며 이를 이용하여 압전 변압기의 기계저인 진동 손실 및 유전 손실을 계산하였다. 또한 유한 요소법을 이용한 3차원 열전달 방정식의 해석을 이용하여 암전 변압기의 온도 분포를 해석하였으며 이를 실험적으로 검증하였다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.1
• /
• pp.127-134
• /
• 1985

On two type regenerator which is represented by their parameters f(t), f(x,t) for generalized regenerating heat exchanger, the temperature distributions are studied analytically in this paper. For f(x,t) regenerator type, particularly, we are able to induce the simplified temperature distribution and convection heat transfer coefficient in heating which apply on condition that regenerator having short transfer period from above theoretical analysis.

• The Korean Journal of Rheology
• /
• v.3 no.2
• /
• pp.135-147
• /
• 1991

압출공정 중에 화학반응이 수반되는 경우에 화확반응은 온도와 체류시간분포 (Residence Time Distribution (RTD))에 의해 결정되므로 압출기의 설계 및 공정조건의 확 립에 있어서 RTD를 정확히 측정하거나 예측하는 것은 매우 중요하다. RTD를 예측하기 위 해 제안된 종래의 방법은 압출기내에서의 유동을 2차원으로 단순화하여 RTD와 체류시간분 포함수 f(T)와 누적 체류시간 분포함수 F(T)를 해석적으로 구하였다. 그러나 이러한 종래의 RTD에 관한 해석방법은 실제압출기 내부에서 일어나는 3차원적 순환유동(Circulatory Flow)을 정확하게 고려하지 못하는 문제점을 갖고 있다. 본논문에서는 RTD를 정확하게 예 측하기 위하여 3차원 순환유동을 고려한 RTD를 구하는 방식을 제시하고 f(T)에 관한 새로 운 공식을 유도하였다. 새로운 방식을 적용하기 위해서 유사 3차원(Quasi-3-Dimensional) 유한요소 해석법을 이용하여 속도분포를 구한 후에 순환유동을 고려한 RTD 및 f(T), F(T) 를 계산하였다. 순환유동이 고려안된 종래의 방법에 따른 계산 결과와 비교한 결과로서 종 래의 방식은 순환유동이 고려안되었기 때문에 RTD를 과소평가하는 경향이 있음을 알수 있 었다.

• Journal of the Korean Society for Railway
• /
• v.20 no.5
• /
• pp.625-636
• /
• 2017

This study looked into the behavior of precast concrete track due to temperature variation and initial track deformation and examined the effect of initial deformation and deformation caused by temperature gradient on the stress distribution of slab under train load. In this paper, one of two papers in a series, a finite element analysis model for calculating deformation and stress of precast concrete track was proposed; the temperature distribution and displacements measured at the precast concrete track in the field were compared with the analytical results. The results show that the slab always curled up due to initial deformation; by comparing the measured displacements with the displacements calculated by taking measured temperatures at each depth as input, the effective built-in temperature (EBITD), the temperature difference between the top and bottom of the slab corresponding to the initial deformation, can be estimated. If EBITD is relevantly assumed, the calculated displacements correlate well with the measured ones.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1993.04a
• /
• pp.213-218
• /
• 1993

F.E.M formulation is carried out in order to determine temperature distribution in the concrete structure. According to this formulation an F.E.M. code is developed, which is capable of silmulating time varying boundary conditions and nonlinear thermal properties.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.51-52
• /
• 2008