• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2006.10a
• /
• pp.154-157
• /
• 2006

ITO(indium tin oxide)/glass 기판 위에 PEDOT:PSS[poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate)]와 PVK[poly(N-vinyl carbazole)] 고분자 물질을 정공 주입 및 수송층으로, 발광층으로 PFO-poss[Poly(9,9-dioctylfluorenyl-2,7-diyl) end capped with POSS]를 사용하여 스핀코팅법과 열 증착법으로 ITO/PEDOT:PSS/PVK/PFO-poss/LiF/Al 구조의 고분자 발광 다이오드를 제작하였다. PFO-poss 유기발광 층의 열처리 조건 (온도, 시간)이 PLED 소자의 전기적, 광학적 특성에 미치는 영향을 조사하였다. 1 wt%의 농도를 갖는 PFO-poss 유기물 발광 층을 200C 온도로 3시간 열처리 할 경우 11 V 인가전압에서 $1497\;cd/m^2$의 최대 휘도를 나타내었다. 동일온도에서 열처리 시간을 1시간에서 3시간으로 증가시킬 경우 휘도의 증가와 함께 발광 개시온도가 감소하는 경향을 보여주었다. 또한 열처리 온도와 시간을 증가시킬 경우 제2발광피크인 excimer 피크가 크게 나타났으며 청색에서 황색 발광 쪽으로 천이되는 경향을 나타내었다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.05a
• /
• pp.109-114
• /
• 2000

In this paper, we studied the relation between heat-treatment temperature of ferrite and electromagnetic wave absorbing properties of ferrite-rubber composite. The heat-treatment temperatures of ferrite are 1200 and 1300 $^{\circ}C$, 2 hr. As s result, it has been shown that the optimum heat-treatment temperature of ferrite for electromagnetic wave absorber are related to the chemical composition. And, we can control electromagnetic wave absorbing properties of ferrite-rubber composite by the control of heat-treatment temperature of ferrite.

• Korean journal of applied entomology
• /
• v.37 no.2
• /
• pp.159-162
• /
• 1998

Effect of temperature on oviposition and developmental period of Oulema oryzae K. on riceplant were investigated. With the given set of temperatures of 15, 20, 23, 25, and 28"C, developmentalperiod from egg to adult emergence was shorten as temperature increased. Average number of eggs perfemale 0. oryzae increased as temperature increased from 15$^{\circ}$C to 23"C, then decreased at 25$^{\circ}$C and 28"C. Based on this result, developmental threshold temperatures for egg was estimated to be 6.4"C. Totaleffective temperatures above the thresolds required for hatching were estimated to be 75.8 degree-daysfor egg. It seemed that the optimum temperature for oviposition of Oulema oryzae on rice plant was 23"C.a oryzae on rice plant was 23"C.quot;C.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.11b
• /
• pp.527-532
• /
• 1996

Fe-Cr-Mn계 스테인리스강을 진공 용해하여 최적 소둔 조건인 1,20$0^{\circ}C$에서 30분동안 소둔 열처리한 후 미세 조직, 기계적 특성 및 부식 특성에 미치는 시효 열처리의 영향에 대하여 실험하였다. 미세 조직 분석은 광학 현미경 관찰, XRD분석, SEM분석, TEM분석 등으로 행하였고, 기계적 시험은 인장 시험, 충격 시험, 경도 시험을 행하였다. 부식 저항성을 평가하기 위해 황산, 염산분위기에서 양극 분극 시험을 행하였다. 시효 열처리에 따른 미세 조직간의 상분율 변화는 거의 없었지만 입계를 중심으로 제2상이 석출되었고, 그 양은 시효 시간이 증가함에 따라 증가하였다. 인장 강도 및 연신율은 낮은 시효 온도에서는 시효 온도와 시효 시간에 따라 큰 차이를 보이지 않았지만 고온으로 갈수록 시효 시간이 증가함에 따라 다소 감소하는 경향이 나타났다. 충격에너지는 1시간 시효시에는 시효 온도에 따라 큰 변화를 보이지 않았지만 10시간, 100시간 시효한 경우 시효 온도가 상승함에 따라 감소하였다. 이러한 경향은 고온에서 시효한 경우 입계성장이 가속화되어 나타난 것으로 판단된다. 시효 시간이 증가함에 따라 부식 환경에 관계없이 부식 저항성이 감소하였다. 85$0^{\circ}C$에서 시효한 경우 가장 우수한 내식성을 보였고, $650^{\circ}C$에서 낮은 내식성을 나타냈는데 이는 이 온도 구간에서 탄화물 등의 제2상의 석출에 의한 것으로 판단된다.

• Current Research on Agriculture and Life Sciences
• /
• v.14
• /
• pp.67-75
• /
• 1996

Capsicum annuum 'Nokkwang' plug seedlings were treated with 9 different day and night temperatures to investigate on growth and differentiation in controlled environment conditions. The plant height was the most affected by day temperature and DIF and stem length was the similler results as plant height. However, Leaf unfolding rate and leaf length and width increased as average daily temperature increased. and especially fresh weight was worst at ADT was $15^{\circ}C$ and increased as ADT increased. In contrast with fresh weight, chlorophyll content calculated highest when ADT was $15^{\circ}C$, and decreased as NT increased respectively. The stem lengths were not significantly different among treatments with exception of DT/NT=15/$15^{\circ}C$ which significantly decreased. The ultimate +DIF condition, DT/NT=30/$15^{\circ}C$, caused high T/R ratio due to abundant top growth. It is concluded that DT is $22.5^{\circ}C$, and NT is ranged from $15^{\circ}C$ to $22.5^{\circ}C$ to be produced short, healthy plug seedlings in Capsicum annuum 'Nokkwang'.

• Journal of the Korean earth science society
• /
• v.27 no.1
• /
• pp.61-72
• /
• 2006

Numerical studies on the influence of interaction between atmosphere and ocean on the variation of Karman vortex at the lee side of Jeju Island were carried out. Karman vortex tends to be occurred at limited height associated with Hanla mountain. And we can find clear Karman vortex at 900 hPa height in this study. One big vortex cell occurred at lee side of Jeju Island in the begging stage of its development and the cell was divided into three small cells as time goes by. And the strength and lifetime of small vortexes depend on the distribution of SST (Sea Surface Temperature). Weak gradient of SST makes long-lasting Karman vortex but produces weak potential vorticity at lee side of Jeju-do in comparison with the vortex under strong SST gradient. Strong SST gradient also increases not only the mixing depth but also the mixing ratio at lower level of troposphere. And the increased atmospheric mixing decreases the mechanical forcing due to isolated topography. Then the strength of Karman vortex at the lee side of Jeju Island becomes weak under strong gradient of SST. Thus the evolution of Karman vortex is closely related to distribution of SST around the isolated island.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.3
• /
• pp.34-39
• /
• 1999

Electron temperature and electron density were rreasured in a radio-frequency inductively coupled plasma (RFICP) using a Langmuir probe method. Measurerrent was conducted in an argon discharge for pressures from 10 mTorr to 40 mTorr and input rf rnwer from 100 W to 600 W. Spatial distribution electroo temperature and electron density were rreasured for discharge with satre aspect ratio (R/L=2). Electron temperature and electron density were discovered depending on both pressure and power. Electron density was increased with iocreasing input power, but saturated at 450 W. Electron density was iocreased with iocreasing pressure. Radial distribution of the electron density was peaked at the rnsition which was a little rmved from center toward quartz window. Normal distribution of the electron density was peaked in the center between quartz plate and substrate. The above results could contribute to understand the Mechanism of Radio-Frequency Inductively Discharge Plasma.Plasma.

• Journal of the Korea Concrete Institute
• /
• v.16 no.5 s.83
• /
• pp.597-604
• /
• 2004

This work involves quantitatively investigating the correlation between reductions in strength and variations in pore structure under high temperature that can be utilized as estimation for predicting the inner temperature of member damaged by fire. The experimental results were remarkedly affected by micro-filling effect of silica fume and the different water-binder ratios. The increase of the exposure temperature caused the increase of porosity, which resulted from the reason that evaporable water in gel pore or capillary pores as well as chemically bound water was eliminated from hardened cement paste due to the dehydration of C-S-H and $Ca(OH)_2$. Thermal shrinkage of hardened cement paste gives rise to micro-crack, which cause the increase of porosity. Based on the experimental result that the increase of porosity is in charge of exposure temperature, how porosity is distributed can predict temperature-time history and assess the performance of concrete damaged by fire.

• Journal of the Korean Geotechnical Society
• /
• v.16 no.4
• /
• pp.157-170
• /
• 2000

In this study, we conducted a combined adsorption-sequential extraction analysis(CASA) to investigate temperature effects of single and competitive adsorption of zinc and copper on natural clays. As a result, it was found out that in a single adsorption of zinc, the adsorption was mostly in the exchangeable phase, with increase n temperature. In a competitive adsorption of zinc, this trend was so strong that the exchangeable phase adsorption increase up to 80~90%. On the other hand, about 50% of copper was adsorbed in the carbonate occluded phase in single and competitive adsorptions. In the single adsorption the adsorption of carbonate occluded phase increased by 5% with the temperature increase and in the competitive adsorption the increase rate is about twice. The adsorption of zinc and copper on natural clays is an endothermic reaction with the exception of exchangeable phase adsorption.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.22 no.3
• /
• pp.284-291
• /
• 2002

An attempt was made to evaluate the degree of aging degradation in thermally aged 2.25Cr-1Mo steel by electrical resistivity measurement. Artificial aging was performed to simulate the microstructural degradation in 2.25Cr-1Mo steel arising from long time exposure at $540^{\circ}C$. Microstructural parameter (amount of solid solution element), mechanical property (ductile-brittle transition temperature) and electrical resistivity were measured to investigate the mutual relationship among these parameters. Depletion of solid solution element(Mo and Cr) in matrix was detected after aging. The ductile-brittle transition temperature(DBTT) increased rapidly in the initial stage of aging and then saturated afterward. On the other hand, the electrical resistivity decreased rapidly in the beginning and then saturated in the later stage of aging.