• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1995.05a
• /
• pp.94-99
• /
• 1995

본 연구는 태양열 열펌프시스템에 의한 약 6평 규모의 실내의 난방방법으로서 간접 난방인 온수순환난방과 직접난방인 복사난방의 성능을 분석하였다. 태양열 열펌프의 최대의 열적성능을 나타낼 수 있도록 알루미늄 롤 본드형 태양열 집열기의 면적을 조절하였으며 집열효과를 극대화하기 위하여 온도감응 자동팽창밸브의 용량을 변화시켰다. 본 실험에서 적용된 태양열 열펌프 난방은 서울지방 봄 가을철의 외기온도에서 실내온도가 18~2$0^{\circ}C$로 유지되도록 설계제작되었다. 태양열 열펌프시스템에 적용된 작용유체는 온수순환 난방에는 R-12냉매. 그 대체냉매는 R-134a 및 혼합냉매, 복사난방에는 R-22냉매이었다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.10 no.2
• /
• pp.105-110
• /
• 2000

The $\alpha$-$Fa_{2}O_{3}/SnO_{2}$ thin film gas sensor was fabricated by APCVD and heat treated. The gas sensitivity to flammable gases ($CH_4$, $H_2$, LPG) was measured. This device was to heat treatment at $400^{\circ}C$, $450^{\circ}C$, $500^{\circ}C$, $550^{\circ}C$, $600^{\circ}C$ for 2 h to enhance the gas sensitivity. The heat treated device at $500^{\circ}C$ for 2 h had the best properties and especially it shows high sensitivity to H2 gas. The sensitivity to gases was studied in the temperature range from lOoC to $300^{\circ}C$ in order to find the optimum detection temperature. In the range of detection from 500 ppm to 10,000 ppm at $175^{\circ}C$ the fabricated device showed that the gas sensitivity to $H_2$ was from 62%~76% and to $CH_4$ was from 16 %~58% and to LPG was from 8%~37 %. The sensitivity difference between heat treated device and as fabricated one was about 10 8 The long-term stability to LPG at 1,000 ppm was converged to sensitivity of 30 %.

• Journal of Adhesion and Interface
• /
• v.25 no.2
• /
• pp.69-74
• /
• 2024

Soft actuators can be applied to various fields such as the medical industry and manufacturing industry due to the flexibility and smooth movement resulted from their constituent materials. Stimuli-responsive hydrogels are a class of materials that can show large volume changes due to various surrounding stimuli and thus is suitable as a soft actuator material. However, because the change in volume of the stimuli-responsive hydrogel depends on the rate of temperature change and the rate at which the solvent diffuses into the polymer network, in most typical operating conditions, the response time of the actuator is slow due to inefficient heat transfer and diffusion process. In this study, a conjugated polymer was introduced into polydiethylacrylamide, a thermoresponsive hydrogel, to implement a soft actuator driven by light, and the improvement in response time by the photothermal effect of the conjugated polymer was investigated. It was confirmed that the response time was improved by 41% by the introduction of the conjugated polymer, due to the improvement in heat transfer efficiency. Finally, a soft gripper using the hydrogel with improved response time was fabricated and the response time of the gripper was investigated.

• Polymer(Korea)
• /
• v.36 no.4
• /
• pp.455-460
• /
• 2012

Poly(N-isopropylacrylamide) (PNIPAM) hydrogel has been studied as an important drug delivery system due to its volume transition or temperature-responsive swelling properties, whose phase separation temperature is similar to the body temperature. However, because of hydrophilic PNIPAM, hydrophobic drugs are difficult to be uniformly loaded in the networks. Antioxidant alpha-lipoic acid (LA) can be prepared as a polymer(polylipoic acid, PLA) by ring opening polymerization, which is hardly developed as a material due to its low molecular weight and easy depolymerization. To overcome this limitation, a hydrophobic active ingredient, LA was reacted with NIPAM into stable hydrogels. Simple thermal radical reaction successfully resulted in a hydrogel (PNIPAM/PLA), which was confirmed by DSC, FTIR, and Raman spectroscopy. The PNIPAM/PLA showed temperature-responsive properties, and their volume swelling decreased with an increase in lipoic acid content. These hydrogels can carry hydrophobic drugs with PNIPAM and the hydrogels could be useful as final drug delivery systems having lipoic acid as an antioxidant.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.10
• /
• pp.967-974
• /
• 2009

Experiments were conducted to measure the heat flux and temperature over a protuberance, using an impulse hypersonic shock tunnel-coaxial thermocouples and a blowdown hypersonic wind tunnel-temperature sensitive paints(TSP). Experimental data were compared with the heat flux data using a blowdown hypersonic wind tunnel-heat flux gauges and it was confirmed data sets agreed well. The measured heat flux is large when the height of the protuberance is large. Also, the heat flux measurements at the upper positions are larger than at the lower positions. For high protuberances, a severe jump in the heat flux is observed, from about 0.6~0.7 of the height of the protuberances. However, when the protuberance is sufficiently short, a rise in the heat flux is rarely observed as the protuberance is submerged totally under the separation region.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.6
• /
• pp.1-5
• /
• 2008

As bare Fiber Bragg Grating (FBG) sensors are very fragile, bare FBG without encapsulation is not properly applied in practical infrastructures directly due to the harsh environment in practical engineering. Steel sleeve packaged FBG strain sensor is widely used in civil engineering. Since FBG senses both strain and temperature simultaneously, for accurate measurement of strain, temperature compensation for FBG strain sensors is indispensable. In this paper, based on the FBG's strain and temperature sensing principles, the temperature compensation techniques for steel sleeve packaged FBG sensors are brought forward. And the experiment of concrete early-age shrinkage monitoring by dual FBG sensors is carried out to test the feasibility of the temperature compensation technique.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10b
• /
• pp.259-260
• /
• 2003

Smart 재료는 외부의 환경에 따라 재료 스스로 주어진 자극을 판단하여 응답할 수 있는 재료를 말한다. 기존의 재료들이 갖는 수동적 응답 기능을 넘어서 생물체처럼 환경에 반응한다는 점에서 뛰어난 특성을 가질 수 있다. 변색성 염료도 이러한 smart 재료 중의 하나로 광, 온도, 화학물질, 전기장 등의 외부 환경 조건의 변화에 따라 색상이 바뀌게 할 수 있다. 대부분의 변색성 염료는 마이크로 캡슐화하여 섬유나 필름에 부착하는 방법을 사용하는데, 이는 항상 내구성이나 안정성 등에서 문제점을 갖고 있다. (중략)

• Korean Journal of Materials Research
• /
• v.4 no.3
• /
• pp.295-300
• /
• 1994

This paper is aimed to study the effect of Pd activator, the annealing temperature, and operating temperatures on the response characteristics of the $SnO_2/Al_2O_3$ sensor. The resistance of device has shown minimum value when annealing temperature and operating temperature of device are $550^{\circ}C$ and $350^{\circ}C$ respectively in ethanol gas. And the response characteristics of the device showed the best results when lwt% Pd was added to SnOz especially in low concentration of ethanol gas.

• Polymer(Korea)
• /
• v.28 no.3
• /
• pp.211-217
• /
• 2004

The sol to gel transition of aqueous solution of block copolymers consisting of methoxy poly (ethylene glycol) (MPEG) and biodegradable polyesters such as $\varepsilon$-caprolactone and L-lactide was investigated as a function of temperature. MPEG-PCL was prepared by ring opening polymerization of $\varepsilon$-caprolactone in the presence of HClㆍEt$_2$O as monomer activator at room temperature. Also, MPEG-PLLA was prepared by ring opening polymerization of L-lactide in the presence of stannous octoate at 115$^{\circ}C$. The properties of block copolymers were investigated by $^1$H-NMR, IR, and GPC as well as the observation of thermo sensitive phase transition in aqueous solution. As the hydrophobic block length increased, the sol to gel transition temperature increased and curve of that steepen to lower concentration. To confirm the gel formation at body temperature, we observed the formation of gel in the mice body after injection of 20 wt% aqueous solution of each block copolymer. After surging, we investigated the gelation in mice. The results obtained in this study confirmed the feasibility as biomaterials of injectable implantation for controlled release of drug and protein delivery.

• Korean Journal of Materials Research
• /
• v.8 no.9
• /
• pp.813-818
• /
• 1998

Ultrafine powders of $\textrm{In}_{2}\textrm{O}_{3}$-doped $\textrm{SnO}_{2}$ were synthesized by a coprecipitation method and the effects of pH value and the amount of In2Q addition on particle size were investigated. The influence of pH value on particle size could be negligible, whereas the amount of $\textrm{In}_{2}\textrm{O}_{3}$ has influenced on particle size and specific surface area. The gas sensitivity to hydrocarbOn($\textrm{C}_{3}\textrm{H}_{8}$, $\textrm{C}_{4}\textrm{H}_{10}$) increased with $\textrm{In}_{2}\textrm{O}_{3}$ addition and reached a maximum at 3wt.% addition. From the results of impedance analysis and I-V characteristics. it was showed that the agglomeration structure of particles and the boundaries between agglomerates were the important factors to determine the gas sensing mechanism.