• Tunnel and Underground Space
• /
• v.11 no.2
• /
• pp.156-166
• /
• 2001

A stochastic continuum(SC) modeling technique was developed to simulate the groundwater flow pathway in fractured rocks. This model was developed to overcome the disadvantageous points of discrete fracture network(DFN) modes which has the limitation of fracture numbers. Besides, SC model is able to perform probabilistic analysis and to simulate the conductive groundwater pathway as discrete fracture network model. The SC model was formulated based on the discrete fracture network(DFN) model. The spatial distribution of permeability in the stochastic continuum model was defined by the probability distribution and variogram functions defined from the permeabilities of subdivided smaller blocks of the DFN model. The analysis of groundwater travel time was performed to show the consistency between DFN and SC models by the numerical experiment. It was found that the stochastic continuum modes was an appropriate way to provide the probability density distribution of groundwater velocity which is required for the probabilistic safety assessment of a radioactive waste disposal facility.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.400-400
• /
• 2023

급격한 기후변화로 인해 일사량, 지표면 온도 및 이산화탄소 농도가 꾸준히 상승함에 따라 수문 순환의 불균형을 초래함과 하천 및 호소 내 수질 또한 악화되고 있는 추세이다. 특히, 국내의 경우, 기후변화 및 인위적 요인에 의해 하천 및 호소에서의 수위 감소 및 수온 증가로 인해 부영양화가 증가되고 있고, 이로 인한 유해 녹조의 발생빈도를 높이는 결과를 초래한다. 현재 국내에서는 유인 수질 관측 및 자동 수질관측 시스템을 통해 주요 수질인자를 모니터링 하고 있으나 시·공간적인 변동성을 파악하는데 제한점이 있다. 이러한 한계점을 극복하기 위해 국·내외에서 광학위성을 이용한 수질인자 추정 알고리즘 개발과 관련된 연구들이 진행되고 있다. 이에 따라, 본 연구에서는 NASA에서 제공하는 Landsat-8 위성과 ESA에서 제공하는 Sentinel-2자료가 동화된 Harmonized Landsat Sentinel-2 위성자료를 활용한 클로로필-a (Chl-a)를 추정하고자 한다. 이를 위해, 본 연구에서는 1) 단순 회귀 분석, 2) Akaike information criteria (AIC) 기반 최적화 회귀 분석 및 3) Random forest (RF)를 활용하였다. 또한, HLS 위성 자료의 적용성을 평가하기 위해 미국 오하이오 주에 위치하고 있는 130여개의 중규모 및 대규모 호소에서 2000년부터 2021년까지 수집된 클로로필-a 관측치를 활용하였다. 두 가지 수질 추정 모형에 대한 정확도 검증에 앞서 오하이오 주 내에서의 클로로필-a의 시계열적 변동성에 대하여 분석하였다. 전반적으로, 2000년부터 2016년까지는 Chl-a가 꾸준히 증가하는 경향성을 나타내었으나, 그 이후로는 감소하는 추세를 나타내었다. 이를 기반으로, 각 방법론을 통해서 나온 Chl-a 추정치에 대해서 통계적 검증을 수행하였다. 결과, 단순 회귀 분석을 통해 추청된 Chl-a값의 결정계수는 0.34였지만, AIC 기반 모델과 RF모형을 사용한 결과 결정계수가 각각 0.82와 0.92로 향상된 것을 확인할 수 있었다. 이와 더불어, spatial 및 temporal window와 더불어 호소의 크기에 따른 정확도 분석 또한 수행하였다. 그 결과, temporal window 가 정확도에 가장 큰 영향을 미치는 것으로 나타났으며, 호소의 크기가 작을수록 정확도가 낮아지는 것을 확인 할 수 있었다. 본 연구의 결과를 토대로 추후 국내 호소에 대해 상기 모형들의 적용성 평가를 수행하여 효율적인 수질 모니터링 시스템 구축으로 이어질 수 있을 것으로 기대된다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.10 no.1
• /
• pp.87-97
• /
• 1990

There is the need to balance safety, economy and serviceability in all phases of society problems. This is especially true in structural code formulation. where a framework is established by which practicing structural engineers can be assured of designing structures that reasonably meet the above three objectives. The existing design codes, which are generally based on the structural theory and certain engineering experience, do not realistically consider the uncertainties of loads and resistances and the basic reliability concepts. The purpose of the present study is therefore to develop the realistic reliability-based design criteria to secure adequate safety arid reliability, and to derive the models for partial and combined resistance factor formats. To this end, the reliability levels of our existing design code for concrete structures are first evaluated and the target reliabilities are determined, the new code formats are evolved from these target reliabilities. The present study indicates that the proposed formats exhibit relatively-uniform reliability and reasonably take into account the different material characteristics of concrete and steel in concrete structures.

• Computational Structural Engineering
• /
• v.4 no.3
• /
• pp.79-88
• /
• 1991

The procedure of the elastic response spectrum method which is used in the codes of many countries involves the computation of a static horizontal substitute loading resulting from the earthquake. The substitute loading is divided by a behavioral factor in order to take energy dissipation due to the real nonlinear structural behavior and damping effects ect. into account. The behavioral factors widely used in many countries are based not on the exact calculation but only on the empirical data. In order to determine the behavioral factors analytically, it is necessary to define the limit state of structures as a first step. In this work, the methods of the determination of limit state for the steel structures are discussed in the geometric, serviceabile and material apsects, and the behavioral factors for the three types of structures are calculated.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.1
• /
• pp.7-13
• /
• 2003

Numerous investigations have demonstrated that diffused reflection is one of the most important factors in predicting room acoustics by computer simulation. Recent studies have suggested several computational algorithms in order to account for diffused reflections in the ray tracing or beam tracing method. In this study, a computational algorithm for the calculation of diffuse sound reflections in the image method is suggested and a computer simulation system is developed based on the suggested algorithm. The methodology adopted in our computer simulation system is similar to the extended radiosity method, which is developed for the computer graphics. In a real room, sound energy is reflected in a partially diffused manner which results in four reflection combinations: diffuse-diffuse, specular-specular, diffuse-specular and specular-diffuse. In this study, higher order form factor is introduced to handle the four types of reflection combinations so that the partially diffused reflection could be modeled. In this paper, the concept of extended radiosity method is described and the approximate method of calculating higher order form factor is suggested. Finally, the effect of higher order form factors on the simulation of reverberation time is investigated.

• Korean Journal of Remote Sensing
• /
• v.35 no.6_4
• /
• pp.1363-1372
• /
• 2019

In this study, we tried to analyze the fusion parameters required to produce a high-resolution multispectral image using an image fusion technique and to suggest global fusion parameters. We analyzed the linear regression coefficients that can simulate the panchromatic image, and the fusion coefficients required for producing the fusion image. When the fusion images were produced using the representative fusion parameters, it was confirmed that the difference in DN value between each fusion image was quantitatively smaller than when the optimal fusion parameters were used. Therefore, this study can minimize the regional characteristics reflected in the fused image.

• Korean Journal of Environmental Agriculture
• /
• v.19 no.1
• /
• pp.6-12
• /
• 2000

This study was carried out to determine the adsorption characteristics of eight pesticides on thirty citrus orchard soil so soil samples were taken from nineteen soil series containing different fractions of organic carbon(Foc). The adsorption characteristics for eight pesticides fitted to Freundlich isotherms. The adsorption isotherms showed C-type for alachlor and chlorpyrifos, L-type for linuron and diniconazole. and S, C, and L-types for metribuzin, metolachlor, and alachlor with increasing Foc, respectively. In particular, the adsorption of chlorothalonil showed S, C, L, and H-types with increasing Foc. Distribution coefficient(Kd) values of metribuzin, metolachlor, and alachlor were below $10\;Lkg^{-1}$ and increased linearly with Foc. Kd values of linuron, diuron and chlorothalonil increased exponentially to 60, 200, and $400\;Lkg^{-1}$, respectively and those of diniconazole and chlorpyrifos increased logarithmically. Kf value. Freundlich adsorption coefficiient, increased with Kd in the same manner with Kd. Furthermore, the linearity of Kf value was larger than that of Kd value.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.4
• /
• pp.111-119
• /
• 2016

Rebound hammer test, SonReb method and concrete core test are most useful testing methods for estimate the concrete compressive strength of deteriorated concrete structures. But the accuracy of the NDE results on the existing structures could be reduced by the effects of the uncertainty of nondestructive test methods, material effects by aging and carbonation, and mechanical damage by drilling of core. In this study, empirical procedure for verifying the in-situ compressive strength of concrete is suggested through the probabilistic analysis on the 268 data of rebound and ultra-pulse velocity and core strengths obtained from 106 bridges. To enhance the accuracy of predicted concrete strength, the coefficients of core strength, and surface hardness caused by ageing or carbonation was adopted. From the results, the proposed equation by KISTEC and the estimation procedures proposed by authors is reliable than previously suggested equation and correction coefficient.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.4C
• /
• pp.193-200
• /
• 2010

This study suggests a method predicting at-rest coefficient of earth pressure ($K_0$) in order to evaluate the effect of stress history of granular soil. The method is based on the relation $K_D/K_0={\chi}(E_D/{\sigma}_m{^{\prime}})^{\delta}$, which is developed by combining two previously published relations such as $E_D/{\sigma}_m{^{\prime}}-{\psi}$ and $K_D/K_0-{\psi}$. As $K_D$ and $E_D$ are observed to be sensitive to the pre-stress, both indices are adopted for the estimation of $K_0$ value of granular soil. It is shown that the proposed $K_D/K_0-E_D/{\sigma}_m{^{\prime}}$ relation is insignificantly affected by the stress history. It is concluded from the comparative study that the proposed method, which uses only dilatometer test results to predict the $K_0$ of granular soil, provides more convenient and reliable prediction than other methods which use both CPT and DMT results.

• Journal of the Korea Concrete Institute
• /
• v.15 no.3
• /
• pp.443-453
• /
• 2003

The diffusivity of carbon dioxide in concrete is very important in that it directly affects the degree of carbonation in concrete structures. The purpose of the present study is to explore the diffusivity of carbon dioxide and to derive a realistic equation to estimate the diffusion coefficient of carbon dioxide in concrete. For this purpose, several series of concrete specimens have been tested. Major test variables were the water-cement ratios. The total porosities and the diffusion coefficients of carbon dioxide were measured for the specimens. The present study indicates that the measured porosities agree well with the calculated ones. The effects of porosity and relative humidity on the diffusion coefficient of carbon dioxide were examined. A prediction equation to estimate the diffusion coefficient of carbon dioxide was derived and proposed in this study. The proposed equation shows reasonably good correlation with test data on the $CO_2$ diffusion coefficient of concrete