• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.660-664
• /
• 1997

본 논문은 사출금형 설계를 위한 전문가 시스템의 개발에 관한 연구이다. 설계자가 오토케드 (AutoCAD)환경에서 금형부품 및 몰드베이스를 3차원 형상으로 나타낼 수 있으며 필요한 설계 데이터를 추가할수 있는 프로그램 개발에 있다. 주 프로그램은 C++를 사용하여 구축하였으며,금형부품 치수 및 몰 드베이스를 데이터베이스화 하였다. 주 프로그램과 오토캐드와 인터페이스를 하여 오토캐드 환경에서 자 유롭게 사용할 수 있도록 하였다. Pull-down menu와 Dialog box를 이용하여 금형 설계자가 금형의 각 부 품을 자유롭게 선정할 수 있으며, 각 단계별 선정된 금형부품은 즉시 나타나 설계자가 바로 확인 할 수 있도록 하였다. 이젝터 핀의 위치 및 크기를 자동적으로 나타낼수 있으며, 선정된 금형 부품 및 몰드베이 스는 2차원이나 3차원으로 나타낼 수 있다. 각각의 3차원 부품을 독립적으로 나타낼 수 있어 NC프로그램과 인터페이스가 가능토록 하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.2
• /
• pp.68-74
• /
• 1998

In this work, we have been concerned with developing an intelligent mold design system for plastic injection molding on the AutoCAD. We have concentrated on building a viable environment, including a mold parts database and a menu-driven user interface. This provides a more interactive and interface for selection of optimal mold-base and mold parts in mold design system. This work presents a method which allows the designer to select the mold parts and mold-base directly within an AutoCAD environment. It can also automatically generate detailed 3D drawings of the mold parts and mold-base. The system shows its potential capability for future enhancement. Since the system is independent of the data, it could easily be extended to other mold-bases and mold parts. In addition, it can be linked to the molding analysis system by creating subtracted 3-D models.

• Journal of the Korea Furniture Society
• /
• v.24 no.2
• /
• pp.131-139
• /
• 2013

The efficiency of internet lectures has been proved in many areas, and its significance and role theory has been consistently mentioned in the fields of furniture design education that demand a large amount of educational contents and practice in visual education. However, it reveals weaknesses without satisfying the demand owing to various realistic issues. In this study, the significance and developmental process of internet lecture as well as its effect after the development in terms of the education on furniture design were analyzed by counting some development cases of internet educational program in relation with AutoCAD educational course, a computer design program for furniture design. Also through such analysis, it intended to promote the development of design education by assessing the merits and problems, assignments to be supplemented, and utilization of the educational course development.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.859-862
• /
• 2015

Recent fashion business, is to promote and make a business strategy to realize a high added value to the first goal. Completion of the best men's clothing is only by making the pattern through a person's body size, making it as the best dressed. In this paper, we propose a system to automate production processes a significant impact on menswear production process, time and cost reduction in order to satisfy the needs of manufacturers and customers. Consequently, it is possible to provide optimal men's clothing by saving a time and expense of customers by, increases the customer's needs and men's clothing demand, it is possible to more easily perform to franchising custom men's clothing manufacturer.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.5
• /
• pp.719-724
• /
• 2010

Thousands of passengers and crews are onboard a cruise ship and there are many cabins and large public spaces such as atria and theaters. Therefore it is easy to cause a huge loss of life and damage to property when accidents happen at sea. To improve the safety of passenger ships, in October 2007, IMO proposed MSC.1/Circ.1238 on guidelines for evacuation analysis and recommended its use. However, this guideline is difficult to apply because ship designers need to get many pieces of information from CAD drawings such as width and length of stairs and corridors and manually calculate the evacuation time. In this paper, for practical application of the guidelines, an evacuation time calculation program is developed using AutoCAD .NET API library and C Sharp language.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.5
• /
• pp.225-231
• /
• 2003

The injection molding is a traditional manufacturing method that can make plastic parts by just one time in mold. Therefore, the injection molding has become one of a manufacturing method, which is widely applied in a producing of plastic products. Nowadays, to use of plastic parts has increased and plastic product-model using term has been shorten. By these reasons, using term of a injection mold has fast been reduced. These produced molds will be disused and leaved in a storage after a regular term to use it. These leaved molds are sometime sold as scrap iron. But, these molds have lots parts for recycling except special parts for example, cavities, cores and eject pins, etc. In this research, we investigated when the cavity and core of in injection mold would be changed, the injection mold could be recycled. We suggested the structures and standardizations for recycling of a moldbase. We also developed a program in which can be used when the recycling moldbase design in the Auto-CAD with the recycling standards. We called this program as the Recy-Mold. For the availability of the program and moldbase structure fur the recycling standards, we experimented a used mold for automobile lens, which was remanufactured by the recycling standard. The results of this test showed feasibility for the recycling mold.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.4
• /
• pp.33-44
• /
• 2023

Wind power is one of the most efficient and reliable energy sources in the transition to a low-carbon society. In particular, offshore wind power provides a high-quality and stable wind resource compared to onshore wind power while both present a higher installed capacity than other renewables. In this paper, we present our new program, the X-WIND program well suitable for the assessment of the substructure of offshore wind turbines. We have developed this program to increase the usability of analysis programs for offshore wind energy substructures by addressing the shortcomings of existing programs. Unlike the existing programs which cannot solely perform the substructure analyses or lack pre-post processors, our X-WIND program can complete the assessment analysis for the offshore wind turbines alone. The X-WIND program is embedded in AutoCAD so that both design and analysis are performed on a single platform. This also performs static and dynamic analysis for wind, wave, and current loads, essential for offshore wind power structures, and includes pre/post processors for designs, mesh developments, graph plotting, and code checking. With this expertise, our program enhances the usability of analysis programs for offshore wind energy substructures, promoting convenience and efficiency.

• Journal of Korean Ophthalmic Optics Society
• /
• v.16 no.2
• /
• pp.107-115
• /
• 2011

Purpose: To design and fabricate the distributed auto edging machine for the development. Methods: We got the necessary data needed in design by using CAD. Based on the these data, we fabricated the trial product for the development of the distributed auto edging machine. Results: The patternless mode could be operated by receiving the eyesize data from the auto lay-outer with the RS232C transmission system and the pattern mode could be operated by setting the pattern on the left side of the machine. The distributed auto edging machine were composed with combinations of many elements; head, auto arm, pattern clamp and grinding wheels. The head part controlled the grinding of ophthalmic lens by operating the vertical and horizontal motors. The wheels part was comprised of glass mode, plastic mode, V-bevel mode and polish mode. The slide in the auto arm was equipped on the below of the patten and the slide could hold up the pattern which was rotated by fixed shaft. The pattern clamp could move the head part to the up and down or right or left way by the manual operation of optometrists. Conclusions: We could succeed in making the trial product by applying it to the development of the distributed auto edging machine which could be used as the patternless mode and pattern mode, selectively. Therefore, it was confidently expected that this product was very helpful for the optometrists to dispense the ophthalmic lens because of its cost-efficiency and convenience.

• Archives of design research
• /
• v.14
• /
• pp.109-119
• /
• 1996

One of the most important factors in the work environment of the industrial design is the design process which can systematically synthesize the informations of related fields. Because the computer technology is being radically developed, industrial should not only positively be able to cope with new technologies, but also should positively be able to take part in the development of the integrated system for the process by the new technologies. Recently in the industrial design field, designers are often using the computer~applied-3D modeling techniques in the development process of industrial design products, especially in the visualization level of the design development. In this paper, we studied the workstation modeling process to understand the computer~applied-3D modeling and presented the methods of transfer of the 3D-modeling data of a workstation(SGI) to the AutoCAD data of a personal computer which is generally being used as a drawing tool in mechanism parts. Through the development process of an electronic taxi meter as a practical case study, we check the possibility whether the 3D-modeling data transferred from an industrial design part to a mechanism part can directly be used as the mechanism data. For this, we transferred the 3D-modeling data of an electronic taxi meter created with a workstation(SGI) to the AutoCAD data of a personal computer and checked the usefulness of data transferred from an industrial design part to a mechanism part. Through these processes of data transfer, we aimed to find out the basic principles which can be rationally applied to a mechanism part or a production part.