• Journal of Radiation Protection and Research
• /
• v.15 no.2
• /
• pp.51-56
• /
• 1990

The dispersing model of radioactive plume in the atmosphere was assumed to form finite ellipseshaped volumes rather than a single plume and gamma absorbed doses from the plume were computed using the proposed model. The results obtained were compared with those computed by the Gaussian plume and the circular approximation models. The results computed by the proposed ellipse-shaped approximation model were close to those by the Gaussian plume model. and more accurate than those by the circular approximation model. The computing time for the proposed approximation model was one fortieth of that for the Gaussian plume model.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.8
• /
• pp.19-26
• /
• 1999

umerical simulations are performed to estimate how strongly the manufacturing error of an open-ended coaxial probe affects its measured complex permittivity of a contacted medium. The reflection coefficients of several dielectric materials contacted with an open-ended coaxial probe are calculated by employing the FDTD method. And then those complex permittivities are reconstructed by applying the calculated reflection coefficients into a new imaginary transmission-line model, which reveals more physically meaningful than the conventional model. It is found that the reconstructed complex permittivities suffer from significant error in spite of a slight imperfection of open-ended coaxial probe.

• Water for future
• /
• v.28 no.4
• /
• pp.125-136
• /
• 1995

ELM, a characteristic line based method, was applied to advection-dispersion equation, and the results obtained were compared with those of Eulerian schemes(Stone-Brian and QUICKEST). The calculation methods consisted of Lagrangian interpolation scheme and cubic spline interpolation scheme for the advection calculation, and the Crank-Nicholson scheme for the dispersion calculation. The results of numerical methods were as follows: (1) for Gaussian hill: ELM, using Lagrangian interpolation scheme, gave the most accurate computational result, ELM, using cubic spline interpolation scheme, and QUICKEST scheme gave numerical damping for Peclet number 50. Stone-Brian scheme gave phase shift introduced in the numerical solution for Peclet number 10 and 50. (2) for advanced front: All schemes gave accurate computational results for Peclet number 1 and 4. ELM, Lagrangian interpolation scheme, and Stone,Brian scheme gave dissipation error and ELM, using cubic spline interpolation scheme, and QUICKEST scheme gave numerical oscillation for Peclet number 50.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.12
• /
• pp.1994-2000
• /
• 1993

A new lattice structure using decision feedback and augmented prediction for estimating and suppressing the narrowband interference is presented. The performance of the proposed interference canceller is compared to the conventional interference cancellation filter. The reference signal of the interference canceller is formed by using the chip decisions, which is correlated with the narrowband interference components of the received signal. The decision feedback technique reduce the distortion of the desired signal which is introduced by the interference canceller through the use of feedback chip decisions. And by linear prediction of the error signal, the residual interference component of can be eliminated, Using this unconteminated error signal to update the adaptive filter coefficients, the performance of the rejection can be improved. In the simulation, it is assumed that the processing gains are 7 and 15, signal to interference ratio is -10[dB], and 5% interference band. The results show that the BER performance of the proposed filter structure is improved by 1~3dB.

• Journal of Korea Multimedia Society
• /
• v.2 no.2
• /
• pp.155-165
• /
• 1999

Because the encrypted data is random, there is a possibility of threat that attacker reveals the secret data. On the other hand, as the image steganogrphy is to embed the secret data into cover image and to transmit the embedded image to receiver, an attacker could not know the existence of secret data even though he/she sees the embedded image, therefore the sender may reduce the threat of attack. In the image steganography, the secret data is embedded by modifying value of pixels as a form of noise. If the secret data is embedded into gray image, the degradation of image quality results from the modifications of image due to noise. Therefore many methods have been proposed to embed the secret data while dethering the gray image, but the existing method using error-diffusion has a problem that any patterns such as a diagonal lines or vertical take place due to embedding the secret data at the fixed interval. To solve this problem and to improve the existing method, we proposed the new method that embeds the secret data at changed point with respect to 1's run-length or at the position where has the minimum difference with the original dithered value. We evaluated the performance of the proposed method by computer simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.5A
• /
• pp.417-425
• /
• 2007

While the cyclic prefix lengths of downlink OFDMA(Orthogonal Frequency Division Multiple Access) systems are determined based on the maximum delay spreads encountered in cellular environments, the guard interval of uplink OFDMA systems should consider the timing offsets of uplink signals as well as the delay spread lengths. Especially in the cases of initial accesses, handovers, and considerable time elapsed without data transmissions between base and mobile stations in a large cell, uplink timing offsets can be large and a very long guard interval length may be required. In order to keep the small size of the cyclic prefix in uplink OFDMA systems, the systems require a method of extending the guard intervals for users with large timing offsets without affecting the cyclic prefix length of the system. This paper proposes a method extending the guard intervals of individual users in uplink OFDMA systems.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.5
• /
• pp.432-440
• /
• 2009

Recently, the necessity of underwater acoustic communication and demand for transmitting and receiving various data such as voice or high resolution image data are increasing as well. The performance of underwater acoustic communication system is influenced by underwater channel characteristic. Especially, a delay spread caused by reverberation and multi-path induces the ISI (Inter-Symbol-Interference) and reduces the communication performance. In this paper, we study the OFDM (Orthogonal Frequency Division Multiplexing) technique for robust the delay spread in underwater channel. We also use the clipping method to overcome the performance degradation in high PAPR (Peak-to-Average Power Ratio). We confirm the performances of underwater communication system by the underwater channel model simulation model and experiment in small water tank. As a result, the multi-carrier modulation with clipping method presented low BER and the previous single carrier modulation had high BER.

• The KIPS Transactions:PartC
• /
• v.9C no.4
• /
• pp.581-588
• /
• 2002

In this paper, we newly propose the optical CDMA routing scheme for the radio access network. At the radio base station (RBS), the received radio signals are multiplied by the PN codes and converted to the CDMA radio signals. In the next optical CDMAS are performed and multiplxed by using the PN codes which are the addresses of the routing mobile switching center (MSC). At the MSC, the CDMA radio signals are routined to another MSC by the CDM receiver at the routing node. In the case MSC is equal to the desired MSC, the radio signal is correlated by the two-layerd spectrum despreading at a time. Finally we theoretically analyze the signal-to-interference and noise power ratio of regenerated signal and the routing error probability and show the availability of proposed scheme.

• Journal of Korea Water Resources Association
• /
• v.45 no.2
• /
• pp.179-189
• /
• 2012

To simulate the transport of pollutant, a numeric model for the advection-diffusion equation with the decay term is developed. This is finite-difference model using the implicit method (with the weight factor ${\alpha}$) and Gauss-Seidel SOR(successive over-relaxation). This model is compared to the analytical solutions (of simpler dimensional or boundary conditions), and in the condition of Peclet number < 5~20, the result shows stable condition, and Crank-Nicolson method (${\alpha}$=0.5) shows the more accurate results than fully-implicit method (${\alpha}$=1). The mass of advection, diffusion and decay is calculated and the error of mass balance is less than 3%. This model can evaluate the 3-D concentrations of the advection-diffusion and decay problems, but this model uses only the finite-difference method with the fixd grid system, so it can be effectively used in the problems with small Peclet numbers like the pollutant transport in groundwater.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.1C
• /
• pp.86-93
• /
• 2008

The Galileo system, a global navigation satellite system(GNSS) developed by E.U., uses the direct sequence/spread spectrum(DS/SS) modulation. A DS/SS-based system performs a fine synchronization between the received and locally generated spreading signals, via attacking process. In the absence of multipath signals, using the symmetric characteristic of the correlation function, the delay lock loop with the early minus late discriminator(EL-DLL) offers the best performance in tracking. However, in the presence of multipath signals, the symmetry of the correlation function could be lost, causing a tracking bias. In this paper, we observe that the correlation values in the advanced offset range remain almost unchanged, due to the multipath signals being received later than a line-of-sight signal. Based on this observation, we propose a novel tracking scheme for a Galileo BOC(1,1) system.