• Aerospace Engineering and Technology
• /
• v.10 no.1
• /
• pp.45-53
• /
• 2011

This paper is technical review about Direct Sequence Spread Spectrum(DSSS) to apply in launch vehicle system. First, we introduce communication protocol(carrier frequency, code length, process gain, data rate, chip rate etc) about several application system using DSSS. And then, we survey and summarize the effect of doppler shift to the DSSS. The doppler shift is important error factor for PN code tracking in the fast moving system like launch vehicle. So, spread spectrum code acquisition technique for a direct sequence system in the presence of doppler effect must be investigated.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.39 no.3
• /
• pp.1-10
• /
• 2002

Because of the reduced number of displayable gray levels resulting from inverse gamma correction, images on a plasma display panel (PDP) exhibit undesirable false contours in dark areas. An error diffusion method has been applied to remedy this problem. However, it is computationally expensive and requires large memory resources. This paper proposes a computationally efficient dithering based technique to improve the gray level reproduction capability in dark areas. In the proposed method, multiple dithering masks ate utilized in turn to improve the gray level reproduction in dark areas. Also, in order to reduce undesirable regular patterns generated by the dithering method, positions of threshold values within a given dithering mask are changed. Compared to the error diffusion method, the proposed method requires much less computations and memory resources with a comparable gray level reproduction capability.

• The Journal of the Korea Contents Association
• /
• v.3 no.3
• /
• pp.11-18
• /
• 2003

Error diffusion is a procedure for generating high quality bilevel images from continuous-tone images but blurs the edge information. To solve this problem, we propose the improved method appling edge enhanced weights based on local characteristic of the original images. We consider edge information as local characteristic. First, we produce edges by appling 3$\times$3 sobel operator to the original image. The edge is normalized from 0 to 1. Edge information weights are computed by using sinusoidal function and the normalized edge information. The edge enhanced weights are computed by using edge information weights multiplied input pixels. The proposed method is compared with conventional methods by measuring the edge correlation and quality of the recovered images from the halftoned images. The proposed method provides better quality than the conventional method due to the enhanced edge and represents efficiently the detail edge. Also, the proposed method is improved in edge representation than the conventional method.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.11
• /
• pp.34-43
• /
• 1999

A high-speed image processor (HIP) is implemented for a high-speed multi-function peripheral. HIP has a binarization architecture with unified data path. It has the pixel-by-pixel pipelined processing to minimize size of the external memory. It performs pre-processing such as shading correction, automatic gain control (AGC), and gamma correction, and also drives external CCD or CIS modules. The pre-processed data can be enlarged or reduced. Various binarizatin algorithms can be processed in the unified archiecture. The embedded binarization algorithms are simple thresholding, high pass filtering, dithering, error diffusion, and thershold modulated error diffusion. These binarization algorithms are unified based on th threshold modulated error diffusion. The data path is designed to share the common functional block of the binarization algorithms. The complexity of the controls and the gate counts is greatly reduced with this novel architecture.

• Journal of Biomedical Engineering Research
• /
• v.25 no.6
• /
• pp.439-445
• /
• 2004

Diffusion tensor image(DTI) exploits the random diffusional motion of water molecules. This method is useful for the characterization of the architecture of tissues. In some tissues, such as muscle or cerebral white matter, cellular arrangement shows a strongly preferred direction of water diffusion, i.e., the diffusion is anisotropic. The degree of anisotropy is often represented using diffusion anisotropy indices (relative anisotropy(RA), fractional anisotropy(FA), volume ratio(VR)). In this study, FA images were obtained using different gradient schemes(N=6, 11, 23, 35. 47). Mean values and the standard deviations of FA were then measured at several anatomic locations for each scheme. The results showed that both mean values and the standard deviations of FA were decreased as the number of gradient directions were increased. Also, the standard error of ADC measurement decreased as the number of diffusion gradient directions increased. In conclusion, different gradient schemes showed a significantly different noise performance and the schem with more gradient directions clearly improved the quality of the FA images. But considering acquisition time of image and standard deviation of FA, 23 gradient directions is clinically optimal.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 1999.10a
• /
• pp.191-193
• /
• 1999

닫힌 반응기 내부에 부유하는 에어로졸 입자들의 크기분포는 응집, 응축, 확산에 의한 침착, 중력침강 및 누출과 같은 여러 기작들에 의해 변화한다. 특히 확산 및 중력침강에 의해 일어나는 입자의 침착(deposition)은 에어로졸 측정기기의 오차분석, 호흡기내부의 미세입자 침착, 건물내부의 입자상 물질의 농도 및 크기분포 변화 등 여러 응용분야에 관련되는 중요한 기작이다.(중략)

• Proceedings of the KAIS Fall Conference
• /
• 2010.05a
• /
• pp.156-159
• /
• 2010

본 논문은 전파의 다중경로에 의한 추적레이더의 추적 오차에 대한 분석과 모사 알고리즘 개발에 관한 것이다. 일반적으로 알려진 저고도 추적 레이더의 연구내용을 분석 하였고 이를 바탕으로 Matlab을 이용한 추적오차 계산용 수치해석 프로그램을 개발하였다. 본 연구에서는 고도 오차의 요인들을 분석하고 안테나 빔 폭, 확산계수, 지면의 반사계수 등을 고려한 오차 계산방법을 제시 하였다. 시뮬레이션 결과들이 이론적인 예측 결과와 잘 일치함을 볼 수 있다.

• Journal of IKEEE
• /
• v.19 no.2
• /
• pp.168-175
• /
• 2015

In this paper, we propose FPGA design technique for rotating LED display device which is capable of displaying videos with the use of the afterimage effect. The proposed technique is made up of image data correction process based on inverse gamma correction and error diffusion, block interleaving process, and data serial output process. The data correction process based on inverse gamma correction and error diffusion is an image data correction step in which image data received are corrected by inverse gamma correction process to convert the data into linear brightness characteristics, and by error diffusion process to reduce the brightness reduction phenomenon in low-gray-level which is caused by inverse gamma correction. In the block interleaving process, the data of the frames entered transversely are first saved in accordance with entrance order, and then only the longitudinal image data are read. The data serial output process is applied to convert the parallel data in a rotating location into serial data and send them to LED Driver IC, in order to send data which will be displayed on high-speedy rotating LED Bar. To evaluate the accuracy of the proposed FPGA design technique, this paper used XC6SLX45-FG484, a Spartan 6 family of Xilinx, as FPGA, and ISE 14.5 as a design tool. According to the evaluation analysis, it was found that goal values were consistent with simulation values in terms of accurate operation of inverse gamma and error diffusion correction, block interleaving operation, and serialized operation of image data.

• The KIPS Transactions:PartB
• /
• v.13B no.2 s.105
• /
• pp.77-82
• /
• 2006

Digital halftoning is the technique to obtain a bilevel-toned image from continuous-toned image. Among halftoning methods, the error diffusion method gives better subjective quality than other halftoning ones. But it also makes edges of objects blurred. To overcome the defect, we proposes the modified error diffusion to enhance the edges using the property that human vision perceives the local average luminance and doesn't perceive a little variation of the spatial variation. The proposed method computes a spatialactivity, which is the difference between a pixel luminance and the average of its $3{\times}3$ neighborhood pixels' Iuminance weighted according to the spatial positioning. The system also usesof edge enhancement (IEE), which is computed from the normalized spatial activitymultiplied by the average luminance. The IEE is added to the quantizer's input pixel and feeds into the halftoning quantizer. The quantizer produces the halftone image having the enhanced edge. The computer experimental results show that the proposed method produces clearer bilevel-toned images than conventional methodsand the edge of objects is preserved well. Also the performance of the preposed method is improved, compared with that of the conventional method by measuring the edge correlation and the local average accordance at some ranges of viewing distance.

• Journal of Korea Water Resources Association
• /
• v.32 no.6
• /
• pp.751-762
• /
• 1999

In this study, a 1-D laboratory experiment was conducted to investigate the characteristics of transient unsaturated solute transport by using two kinds of soils of which properties were known by test. Especially the TDR method which is proposed in this study was used to measure water content and solute concentration. As results, in the transient flow, the wetting front moves down rapidly, and the distribution of solute concentration near the wetting front showed the similar type of the water content distribution(semi-bell type). A numerical model HYDRUS was used to compare with the experimental results. Numerical results for the water movement are similar to experimental result. However, numerical results of the distribution of solute concentration are more scattered than experimental results. It means that measured dispersivity, numerical dispersion, adsorption coefficient, and soil sample size etc. should be considered in order to determine the dispersivity used in the numerical model. The present measuring method was proved to be superior to other formula and to be an available method to apply to solute transport test. The measuring error of the developed method is estimated smaller than 10% while water content is larger than 0.15.