• Korean Journal of Food Science and Technology
• /
• v.18 no.1
• /
• pp.42-47
• /
• 1986

The fatty acid composition of lipids extracted from 18 kinds of salted and fermented sea foods which have been consumed in Korea were examined. The lipid contents of salted and fermented sea foods showed wide difference (0.8-11.9%) depending on species and portions of raw materials. In fatty acid composition of salted and fermented sea foods prepared with whole fishes, the saturated fatty acid was the most predominant component, and the major fatty acids were 16:0, 18:1, 22:6, 16:1 and 20:5. In case of salted and fermented products prepared with gills, roe or intestines, the polyenoic fatty acid was the main component, the major fatty acids were 18:1, 16:0, 22:6, 20:5, 16:1 and 18:3. In these products the composition ratios of 20:5 and 18:3 were higher, and that of 16:0 and 16:1 were slightly lower as compared with salted and fermented whole fish products. And in case of salted and fermented crustacea and mollusk, the polyenoic fatty acids such a 22:6 and 20:5 were the most predominant component, the abundant fatty acids were 22:6, 16:0, 20:5, 18:1 and 16:1. Judging from results, salted and fermented sea foods were abundant of the highly unsaturated fatty acids such as 20:5, 22:6 inspite of the long fermentation periods.

• Food Science and Preservation
• /
• v.18 no.5
• /
• pp.627-635
• /
• 2011

This study was conducted to assess the effects of the removal of pesticide residues and microorganisms from yuja (Citrus junos Sieb ex Tanaka) using a surface-washing system, under the following washing conditions: 0.11, 0.42, and 0.73 m/s spray rotation speeds; 0.6, 0.9, and 1.2 MPa water pressure and 0.046, 0.092, and 0.138 m/s conveying speeds. Tap-water treatment was used as the control. The washing efficiency when using squid ink was highly correlated with the conveying speed and the spray rotation speed. In addition, the highest washing efficiency was achieved when the water pressure was 0.9 MPa. The microorganisms were reduced to 0.40 log CFU/g for the tap-water treatment, and all the treatments, except those at the conveying speed of 0.138 m/s and the spray rotation speed of 0.11 rpm (6.07 log CFU/g), produced higher removal efficiencies compared with the tap-water treatment. Reductions of 2.20 and 2.05 log CFU/g were achieved at the spray rotation speeds of 0.42 and 0.73, respectively. The largest reductions were observed when the conveying speed was 0.046 m/s. Higher pesticide residue removal efficiency values were obtained at slower conveying speeds and higher spray rotation speeds. Higher than 50% removal efficiency was achieved when the spray rotation speed was 0.046 m/s for spirodichlofen, deltamethrin, benomyl, thiophanate-methyl, and acequinocyl. Especially, the removal efficiency for benomyl and thiophanate-methyl was more than 90%. It can thus be concluded that the pesticide residues in yuja can be effectively reduced by washing the latter with a less-than-0.092-m/s conveying speed and a higher-than-0.42-m/s spray rotation speed.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.6
• /
• pp.600-604
• /
• 2001

For the effective utilization of cuttle bone as a calcium powder, we examined calcination condition ($700^{\circ}C: 0\sim10\;hrs,\;800^{\circ}C:\;0\sim3\;hrs,\;900^{\circ}C:\;0\sim1\;hr\;and\;1,000^{\circ}C:\;0\sim30\;mins$) for recovery of calcium from raw cuttle bone powder (RCB) and characteristics of calcined cuttle bone powder (CCB) treated by optimal condition. During calcination of RCB, the yields was decreased, while total and soluble calcium contents and white index were increased up to constant calcination time ($8\;hrs\;at\;700^{\circ}C,\;2\;hrs\;at\;800^{\circ}C,\;45\;min\;at\;900^{\circ}C\;and\;20\;min\;at\;1,000^{\circ}C$). But, these after that almost unchanged. From these results, the optimal calcination conditions for recovery of calcium from RCB were revealed $8\;hrs\;at\;700^{\circ}C,\;2\;hrs\;at\;800^{\circ}C,\;45\;min\;at\;900^{\circ}C\;and\;20\;min\;at\;1,000^{\circ}C$. In the case of CCB treated for 2 hrs at $800^{\circ}C$, total calcium was about $70\%$, the major component was calcium oxide, and the structure consisted of porosity. The calcium solubility of CCB increased by 22 times compared to RCB. But, the pH of RCB was about 12.9. Therefore, for the effective utilization of RCB as a calcium powder, it requires a suitable modification operation for adjustment of pH ($pH\;2.0\~9.0$).

• Korean Journal of Food Science and Technology
• /
• v.45 no.1
• /
• pp.59-69
• /
• 2013

This study investigated the frequency, amount and consumption patterns of 50 potentially hazardous foods (PHF) along with consumers' risk perceptions towards PHF in Korea. A quantitative survey was performed from May through August by trained interviewers, surveying 1,000 adults aged over 18 who were randomly selected from six major provinces in Korea. Consumers perceived seafood, including shellfish, mussel, sashimi and sushi, as the top foods with the highest risk, followed by raw sliced beef. The food with the highest frequency intake per month was leafy vegetables, which is used to wrap other foods, followed by blanched vegetables, fried chicken, etc. The group of middle aged individuals with economic stability had the highest frequency intake of sashimi and sushi. Respondents living in small regions consume greater PHF portions at once. Food safety education with regard to the risk of PHF is essential for consumers, with high frequent intake of PHF.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.4
• /
• pp.481-487
• /
• 1999

The optimal conditions of enzymatic hydrolysis for preparation of rapid salted and fermented anchovy sauce (SFAS) using various pretenses such as trypsin, chymotrypsin, crude enzyme from squid liver and viscera, Alcalase, Neutrase and Protamex were studied. SFAS prepared with squid viscera had higher level of VBN (173.6 mg/100 g) when stored for 70 days than other samples, and peroxide values were almost equal among all samples during fermentation period. Total amino acids and nonprotein nitrogenous compounds remarkably increased as SFAS treated with Alcalase or Protamex which exhibited higher the hydrolysis rate of $57\%$ at 60 day than others. The optimal pHs of trypsin, chymotryosin, Alcalase, Neutrase and Protamex on anchovy actomyosin were 7.5, 6.5, 6.5, 7.0 and 5.0, respectively. Optimal temperatures of trypsin, chymotryosin, Alcalase and Neutrase were 55, 45, 60 and $55^{\circ}C$, respectively. Otherwise, Protamex activity increased as temperature increased from 20 to $70^{\circ}C$. Protamex had higher $K_m$ (3.545) and $V_{max}$ value (2.688) than others. Protamex affected less by NaCl had $52.5\%$ activity at the fermentation condition of $20^{\circ}C$ and $25\%$ NaCl. Protamex appeared to be very effective for the hydrolysis of crude actomyosin from ancnovy.

• Analytical Science and Technology
• /
• v.22 no.4
• /
• pp.336-344
• /
• 2009

This survey was carried out to estimate the contents of heavy metals (Hg, Pb, Cd, and As) in 10 kinds of dried marine products (n=189) which are closely related to food resources. The contents of heavy metals were estimated by inductively coupled plasma spectrometer (ICP) and mercury analyzer. The values of heavy metals in dried marine products were as follows (Mean${\pm}$SD (range), mg/kg). The average contents of heavy metals in the dried marine products were Hg $0.058{\pm}0.069$ (0.002~0.502) mg/kg, Pb $0.178{\pm}0.598$ (ND~5.130) mg/kg, Cd $0.306{\pm}0.610$ (ND~6.802) mg/kg, As $5.282{\pm}6.158$ (ND~71.760) mg/kg. The range of heavy metal contents in dried marine products are low level, except of lead contents (n=2). In the comparison of heavy metal content by anchovy size, it was shown that cadmium, mercury and arsenic were meaningfully different. The contents of heavy metals by the shape of shrimp and Alaska Pollack were shown that the result of each group was meaningless. In the comparison imported production with domestic production, in the case of common squid, cadmium and arsenic were meaningfully different. The weekly average intakes of Hg, Pb and Cd from dried marine products takes about 1.17~11.52% of PTWI (Provisional Tolerable Weekly Intakes) that FAO/WHO Joint Food Additive and Contaminants Committee has set to evaluate their safeties.

• Journal of the Korean Society of Food Culture
• /
• v.21 no.6
• /
• pp.653-660
• /
• 2006

Some quality characteristics of tofu prepared with cuttlefish ink were investigated to study the effects of various of coagulants. Each concentration of coagulant was determined as 0.2% of GDL, 0.3# of $MgCl_2$, 1%^ of $CaCl_2$, 1.5% of $CaSO_4$ and 0.6% D-gluconic acid calcium by pre-experiment. Also, the optimum concentration of added cuttlefish ink was chosen as 3%(diluted in twenty times). The yield of inky tofu prepared with GDL as coagulant was the highest. According to prepared with $MgCl_2$ was the highest. The result of microstructure was examined by SEM, the particles of inky tofu coagulated with GDL and D-gluconic acid calcium were small and uniformity. In overall acceptability of sensory properties, inky tofu coagulated with GDL was the highest in score. In the color of inky tofu, L value and a value were the highest coagulated with GDL, but that coagulated with $CaCl_2$ had the highest b value. In the texture properties of inky tofu, hardness, gumminess and brittleness were the highest coagulated with D-gluconic acid calcium. A positive correlation was observed between the pH of tofu whey and acidity. Sensory properties of roasted nutty flavor, hardness, cohesiveness and springiness were positively correlated with the acceptability.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.2
• /
• pp.252-260
• /
• 2009

Whereas the numbers of childcare centers and kindergartens are increasing rapidly, systematic management to control the food safety of foodservice operation is not yet well established. Samples from 12 centers in Seoul and Gyeonggi Province were collected to assess the microbiological quality of 32 raw materials, 24 cooked foods, 76 food-contact surfaces (knives, cutting boards, dish towels and gloves), 17 employees' hands and 12 air-borne bacteria. The microbiological analyses were performed for aerobic plate counts (APC), Enterobacteriaceae, E. coli and 7 pathogens (B. cereus, C. jejuni, C. perfringens, L. monocytogenes, Salmonella spp., S. aureus, and V. parahaemolyticus). Among raw materials, E. coli ($1.39{\sim}2.08\;\log\;CFU/g$) were detected in 4 out of 6 meats and 7.46 log CFU/g of APC in tofu. High enterobacteriaceae levels of 4.23, 5.14 and 4.19 log CFU/g were found in cucumber salad, steamed spinach with seasonings and steamed bean sprout with seasonings, respectively. No pathogens were found in all samples except for C. perfringens detected from raw spinach and raw lotus root. Only APC and enterobacteriaceae were found in food-contact surfaces. Two of the 23 knives and three of the 24 kitchen boards showed over 500 CFU/$100\;cm^2$ of APC; also, APC levels (5.03 to 5.44 log CFU/g) were detected in 4 of the 12 dish towels. Only one glove showed Enterobacteriaceae (2.44 log CFU/glove) contamination. Enterobacteriaceae were found in 2 employees' hands ($2.37{\sim}4.44\;\log\;CFU$/hand) among the 16 employees. The contamination levels of air-borne bacteria were shown unacceptable in two (2.25 and 2.30 log CFU/petri-film/15 min) out of the 12 kitchen areas. These results suggest that the microbiological hazards in some foods and environments are not well controlled and thus a guideline should be provided to ensure the food safety in childcare center and kindergarten foodservice operations.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.2
• /
• pp.156-163
• /
• 2009

Statement of problem: Recently, there have been increased esthetic needs for posterior dental restorations. The failure of posterior dental ceramic restoration are possible not only by the characters of the component materials but also by the type of food. Purpose: The research aim was to compare the in vitro fracture resistance of simulated first molar crowns fabricated using 4 dental ceramic systems, full-porcelain-occlusal-surfaced PFG, half-porcelain-occlusal-surfaced PFG, Empress 2, Ice Zirkon and selected Korean foods. Material and methods: Eighty axisymmetric crowns of each system were fabricated to fit a preparation with 1.5- to 2.0-mm occlusal reduction. The center of the occlusal surface on each of 15 specimens per ceramic system was axially loaded to fracture in a Instron 4465, and the maximum load(N) was recorded. Afterwards, selected Korean foods specimens(boiled crab, boiled chicken with bone, boiled beef rib, dried squid, dried anchovy, round candy, walnut shell) were prepared. 15 specimens per each food were placed under the Instron and the maximum fracture loads for them were recorded. The 95% confidence intervals of the characteristic failure load were compared between dental ceramic systems and Korean foods. Afterwards, on the basis of previous results, 14Hz cyclic load was applied on the 4 systems of dental ceramic restorations in MTS. The reults were analyzed by analysis of variance and Post Hoc tests. Results: 95% confidence intervals for mean of fracture load 1. full porcelain occlusal surfaced PFG Crown: 2599.3 to 2809.1 N 2. half porcelain occlusal surfaced PFG Crown: 3689.4 to 3819.8 N 3. Ice Zirkon Crown: 1501.2 to 1867.9 N 4. Empress 2 Crown: 803.2 to 1188.5 N 5. boiled crab: 294.1 to 367.9 N 6. boiled chicken with bone: 357.1 to 408.6 N 7. boiled beef rib: 4077.7 to 4356.0 N 8. dried squid: 147.5 to 190.5 N 9. dried anchovy: 35.6 to 46.5 N 10. round candy: 1900.5 to 2615.8 N 11. walnut shell: 85.7 to 373.1 N under cyclic load(14Hz) in MTS, fracture load and masticatory cycles are: 1. full porcelain occlusal surfaced PFG Crown fractured at 95% confidence intervals of 4796.8-9321.2 cycles under 2224.8 N(round candy)load, no fracture under smaller loads. 2. half porcelain occlusal surfaced PFG Crown fractured at 95% confidence intervals of 881705.1-1143565.7 cycles under 2224.8 N(round candy). no fracture under smaller loads. 3. Ice Zirkon Crown fractured at 95% confidence intervlas of 979993.0-1145773.4 cycles under 382.9 N(boiled chicken with bone). no fracture under smaller loads. 4. Empress 2 Crown fractured at 95% confidence intervals of 564.1-954.7 cycles under 382.9 N(boiled chicken with bone). no fracture under smaller loads. Conclusion: There was a significant difference in fracture resistance between experimental groups. Under single load, Korean foods than can cause fracture to the dental ceramic restorations are boiled beef rib and round candy. Even if there is no fracture under single load, cyclic dynamic load can fracture dental posterior ceramic crowns. Experimental data with 14 Hz dynamic cyclic load are obtained as follows. 1. PFG crown(full porcelain occlusion) was failed after mean 0.03 years under fracture load for round candy(2224.8 N). 2. PFG crown(half porcelain occlusion) was failed after mean 4.1 years under fracture load for round candy(2224.8 N). 3. Ice Zirkon crown was failed after mean 4.3 years under fracture load for boiled chicken with bone(382.9 N). 4. Empress 2 crown was failed after mean 0.003 years under fracture load for boiled chicken with bone(382.9 N).

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.1
• /
• pp.38-42
• /
• 2000

Thig study was conducted to get a knowledge on chemical components of the cooked tuna bones (skipjack tuna bone and yellowfin tuna bone) as a food resource. The crude protein of tuna bone was around $29{\%}$ on the dry basis. The imino acid content (193 imino acid residues /1,000 amino acid residues) of collagen extracted from yellowfin tuna bone was higher than that (173 imino acid residues /1,000 amino acid residues) of collagen extracted from skipjack tuna bone, however, it was lower than that of collagen extracted from animal bone. The content and the ratio of unsatuated fatty acids in lipid extracted from yellowfin tuna bone were higher than those of lipid extracted from skipjack tuna bone, but they were lower than those of squid viscera oil. The contents of calcium and phosphorus as the major components of the tuna tone were 36.5 g and 17.2 g in 100 g ash in the skipjack, respectively, and 38.0 g and 18.7 g in 100 g ash in the yellowfin, respectively. It was concluded from these results that tuna bones could be effectively utilized as a mineral source.