• Journal of the Korean Institute of Gas
• /
• v.26 no.5
• /
• pp.1-9
• /
• 2022

Selection of a suitable artificial lift is important in terms of efficient operation and economics for oil production. In general, process of well design includes the selection of artificial lift, but the oil recovery could be enhanced by use of hybrid system combined with two types of artificial lift method according to reservoir condition for oil production. Electric submersible pump (ESP), as a presentative artificial lift method, is a manner for supplying the pressure in the lower part of oil well by using of a multi-stage centrifugal pump with an electric energy. However, there is a disadvantage that has a limit to the application period because of mechanical defection on ESP. Accordingly, it is possible to reduce the shutdown time of production well by applying the ESP/Gas lift hybrid system, which is to switch to a gas lift when an ESP is defective. This study describes the effect of ESP/gas lift hybrid system compared with ESP method for a onshore horizontal well locating in the of Permian basin, USA. As a result of study, ESP/gas lift hybrid system could make more effective productivity than ESP method. Also, we quantitatively predicted how much economic benefit would be obtained when the hybrid system was applied in the production well.

• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 1979.10a
• /
• pp.244.3-245
• /
• 1979

1. 수율계수 함수의 영향 : 유가 배양에 있어서 수율 계수가 제한 기질 농도의 함수일 경우에 대한 연구를 수행하였다. 사용한 수율 계수 함수는 기질 농도에 대하여 선형 함수였으며 목적함수는 중간 대사 물질의 생산량이었다. 1-가) 수율 계수 함수의 기울기가 음의 값으로 적어짐에 따라 제한 기질의 공급속도가 증가되었다. 1-나) 일반적으로 초기의 얼마 동안은 회분 배양에서와 같이 공급 속도가 거의 없었으며 그후 전환점 이후에 가서야 공급 속도가 증가하였다. 1-다) 전환점 이후에서도 처음에는 대부분의 경우에 공급속도가 음의 값으로 부터 시작하여 증가하기 시작하였다. 1-라) 어떤 경우에는 배양 초기부터 공급 속도가 양의 값으로부터 시작하였으나 곧 감소하였다가 다시 증가하는 비 단조형 변화를 보였다. 1-마) 전환점 이후에서 공급 속도가 증가하는 형태에서도 처음에는 선형 증가를 보이다가 나중에 지수적 증가를 보였다. 1-바) 위와 같은 공급 속도의 변화에 따른 발효조 내의 제한 기질 농도의 변화는 초기에는 가능한 최대치를 유지하다가 전환점 이후에는 갑자기 감소하는 형태를 취하였다. 2. 목적 함수의 영향: 목적 함수가 균체량과 생성 중간 대사물질 량의 선형 결합일 때 대하여 연구하였다. 선형 결합 계수로는 균체량과 생성대사 물질의 상대적인 값어치를 취하였다. 2-가) 허용 최대 균체 농도가 제한되어 있는 상황 하에서 생성 대사 물질의 상대적인 값이 증가 할수록 목적 함수가 증가하였다. 2-나)생성대사 물질의 상대적인 값이 증가할수록 전환점의 위치가 줄어들었다. 2-다) 생성대사 물질 상대적 값의 단위 증가에 대한 목적 함수는 균체량을 감안하지 않은 야마네박사의 결과에 수렴하였다. 2-라) 공급 속도는 상대 값이 커질수록 줄어들었다. 2-마) 균체량의 시간에 대한 곡선은 상대값이 증가할수록 감소하고 전형적인 분기점 형태의 변화를 보였다.변이 뚜렷하여 이로 인한 외임파강내의 염증성병변이 뚜렷이 나타나 있으며 와우관의 특히 기저회전에서의 유모세포의 손실이 심한 것으로 보아 중이염으로 인한 골도의 고음역에서의 손실이 발생함을 알 수 있다.A group), vinclozolin, procymidone, tetradifon cypermethrin, 그리고 fenvalerate(B group)에서는 70% 이상의 회수율을 얻었고, 20%의 ethyl acetate/hexane을 사용하여 분석한 경우는 5%나 10%의 ethyl acetate/hexane을 사용하여 분석했을 때보다 좋은 결과를 나타내어 전체 16종의 농약 중 14종에서 75% 이상의 회수율을 얻었으나, alachlor와 bifenthrin은 매우 낮은 회수율을 보여서 ethyl acetate와 hexane의 혼합용매가 이들 두 농약성분의 분석에는 적합하지 않은 용출 용매임을 알 수 있었다.NO_2의$ 급성 중독증상으로서는 눈, 코를 강하게 자극하고 폐충혈, 폐수종, 기관지염, 폐염 등을 일으킨다. 만성 중독시에는 만성폐섬유와 및 폐수종을 일으킨다. (4) $오존(O_3)$ Ozone은 자동차 배기가스에서 나오는 $NO_2$ gas 및 탄화수소와 작용하여, PAN이라는 자극성 물질을 생성시키는 광학적 Smog의 주요소로 알려져 있다. 자극적인 냄새가 있음으로 불쾌감을 주고 비, 인후점막의 전조감과 두통이 오며 폐기능을 저하시키며 더욱 진행되면 폐충혈, 폐수종 등을 일으킨다 (5) Smog에 의한 건강피해 대표적인 것이 1952.12.5~12.8까지 4일간 영국 Lon-don에서 계속된 Smog사건이며, 이 사건으로 말미암아 호흡기질환 사망율이 사건전보다 사건기간 중 혹은 사건후에 5~10배의 증가율을 보였다. 이때 Smog의 주원인은 연료의 불완전 연소에 의한 연기와 이때 발생

• Applied Chemistry for Engineering
• /
• v.20 no.1
• /
• pp.1-8
• /
• 2009

Bio-oil has attracted considerable interest as one of the promising renewable energy resources because it can be used as a feedstock in conventional petroleum refineries for the production of high value chemicals or next-generation hydrocarbon fuels. Currently, catalytic vapor cracking is considered the most potential upgrading method for stabilization of bio-oil, which is a pre-process required prior to feeding bio-oil into refineries. This review introduces the recent research and development trends on bio-oil upgrading via catalytic vapor cracking, focusing on catalysts and upgrading methods used.

• Membrane Journal
• /
• v.8 no.2
• /
• pp.94-101
• /
• 1998

The oil separation is effectively performed from the oil containing alkaline cleaner solution by using a backflushed ultrafiltration system, where hollow fibers commercially made by polyacrylonitrile copolymer are bundled. Backflushing to reduce membrane fouling during crossflow ultrafiltration is investigated. Experimental observations allow us to understand the behavior of permeate flux according to the relative operating conditions, and determine the optimum condition of normal operation and backflushing. The maximum improvement of net permeate flux owing to backflushing was found to be about 23 % with the condition of 10 min/40 sec for the cycle of normal/backflushing operations. Note that, however, the maintenance of stable permeate flux is lost as the duration of normal operation is increased. The permeate flux depends on both the backflushing pressure and the feed flow rate. It is obvious that there is a critical velocity of feed flow, in which permeate flux is practically independent of backflushing pressure. Above this critical value, the permeate flux is proportional to an appropriate power of the backflushing pressure, $\Delta P_{back}^n$, where exponent n is enhanced with increasing feed velocity.

• Korean Chemical Engineering Research
• /
• v.56 no.4
• /
• pp.469-473
• /
• 2018

When pure hydrogen was supplied to the stationary PEMFC generally using the reforming gas, its characteristics were compared with the vehicle PEMFC. The effect of varying the amount of hydrogen supply to the anode on the overall performance was compared. The variation of hydrogen supply in the range of 1.0~1.7 excess (stoi.) had little effect on the OCV of stationary and vehicle MEA (Membrane and Electrode Assembly). At 0.7 V, the current density of the stationary MEA was about 16% higher than that of the vehicle MEA. I-V performance, impedance, and LSV were measured with varying relative humidity. Both OCV and electrolyte membrane resistances decreased with increasing relative humidity. The hydrogen permeability of the stationary MEA was lower than that of the vehicle MEA, showing that the durability of the stationary membrane could be higher than that of the vehicle membrane.

• The Journal of the Korea Contents Association
• /
• v.15 no.4
• /
• pp.490-499
• /
• 2015

In this study, for the introduction factors of ERP system suggested in the prior study, I analyzed the importance of each introduction factor by using Delphi methodology and AHP. As a result of analysing the importance of the introduction factors of the 1st layer, the supplier factor was analyzed to be the most important factor among innovation factor, information technology factor, the user factor, the supplier factor, and in the weight analysis on the 2nd layer considering the importance of 1st layer, the standard work model of the supplier factor was a suitable factor, and the CEO participation factor(.086) was analyzed as the second most important introduction factor. These analysis results enable to determine that domestic Small & Medium enterprises' position hope to introduce by selecting a system in which the company characteristics and management strategies are applied well, because they should operate an ERP system that has already been developed, and in this course, the participation of CEO was also found to be a very important factor.

• Journal of Plant Biotechnology
• /
• v.45 no.3
• /
• pp.250-256
• /
• 2018

To determine whether metabolite fingerprinting for whole cell extracts based on Fourier transform infrared spectroscopy (FT-IR) can be used to discriminate and compare metabolic equivalence, standard medicinal parts of Cynanchum wilfordii (Maxim.) Hemsl. and their adventitious roots were subjected to FT-IR. The principal component analysis (PCA) and partial least square discriminant analysis (PLS-DA) from FT-IR spectral data showed that whole metabolic pattern from the adventitious root of Cynanchum wilfordii was highly similar to its standard medicinal parts. These results clearly showed that mass proliferation of adventitious roots could be applied for the novel supply of standard medicinal parts of medicinal plants. Furthermore, FT-IR spectroscopy combined with multivariate analysis established in this study could be applied as an alternative tool for discriminating of whole metabolic equivalence from standard medicinal parts. Thus, it is proposed that these metabolic discrimination systems from the adventitious root of Cynanchum wilfordii could be applied for metabolic standardization of in vitro grown Cynanchum wilfordii.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.1
• /
• pp.324-332
• /
• 2019

Most countries including Korea and Indonesia have strong policy for implementing biofuels like biodiesel. Shortage of the oil feedstock is the main barrier for increasing the supply of biodiesel fuel. In this study, in order to improve the stability of feedstock supply and lower the biodiesel production cost, the feasibility of biodiesel production using two types of Indonesian tropical crop oils, pressed at different harvesting times, were investigated. R. Trisperma oils, a high productive non-edible feedstocks, were investigated to produce biodiesel by esterification and transesterification because of it's high impurity and free fatty acid contents. the kindly provided oils from Indonesia were required to perform the filtering and water removal process to increase the efficiency of the esterificaton and transesterification reactions. The esterification used heterogeneous acid catalyst, Amberlyst-15. Before the reaction, the acid value of two types oil were 41, 17 mg KOH/g respectively. After the pre-esterification reaction, the acid value of oils were 3.7, 1.8 mg KOH/g respectively, the conversions were about 90%. Free fatty acid content was reduced to below 2%. Afterwards, the transesterification was performed using KOH as the base catalyst for transesterification. The prepared biodiesel showed about 93% of FAME content, and the total glycerol content was 0.43%. It did not meet the quality specification(FAME 96.5% and Total glycerol 0.24%) since the tested oils were identified to have a uncommon fatty acid, generally not found in vegetable oils, ${\alpha}$-eleostearic acid with much contents of 10.7~33.4%. So, it is required to perform the further research on reaction optimization and product purification to meet the fuel quality standards. So if the biodiesel production technology using un-utilized non-edible feedstock oils is successfully developed, stable supply of the feedstock for biodiesel production may be possible in the future.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.2
• /
• pp.351-358
• /
• 1993

Recently a high speed spindle system for machine tools has attracted considerable attention to reduce the machining time, to improve the machining accuracy, to perform the machining of light metals and hard materials and to unite the cutting and grinding processes. In this study, a high speed spindle system is developed by applying the oil-air lubrication method, angular contact ball bearings, injection nozzles with dual orifices and so on. And a lubrication experiment for evaluating the performance of the spindle system is carried out. Especially, in order to establish the lubrication conditions related to the development of a high speed spindle system, the effects of oil supply rate, rotational spindle speed and so on are studied and discussed on the bearing temperature rise, bearing temperature distribution and frictional torque. And the effect of spindle system structure on the bearing temperature distribution is investigated.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.868-869
• /
• 2015

지하 매설된 가스배관을 정기적으로 검사하기 위해서 가스 공급 및 용역업체에서는 주로 비피과검사 탐상장비인 MFL(Magnetic Flux Leakage) PIG(Pipeline Inspection Gauge)를 사용한다. 기존의 MFL PIG는 배관 내 유체(가스,오일 등)의 전후차단 압력의 흐름을 이용해 별도의 구동장치 없이 피그를 진행시켜 배관의 결함 유무를 평가하는 시스템이다. 하지만 10기압 이하의 낮은 운영압력과 T 분기관과 같이 급격한 곡관부가 존재하는 직경 16인치 이하의 도시가스 배관에는 기존의 시스템을 적용하기 어렵다. 이처럼 기존 MFL PIG의 적용이 불가한 도시가스 배관(직경 16인치 이하)을 활주하기 위해서는 우선 비파괴검사 시스템을 견인할 수 있는 추진 로봇이 필요하고 추진로봇에 적합한 자기누설 비파괴검사 시스템의 개발이 필요하다. 또한 비파괴검사 장비의 센서 시스템은 결함신호를 탐지하여 결함의 발생유무 및 결함의 형상을 판별하는 성능도 중요하다. 본 논문에서는 16인치 도시가스 배관의 검사를 위한 자기누설 비파괴검사 시스템의 기초설계와 대상 시스템의 자기적 특성을 분석한다. 또한 배관 외벽의 결함 발생 유무에 따른 자기누설 신호의 크기 및 분포변화를 3차원 유한요소법을 이용해 해석하여, 결함 검출 신호의 특성을 분석하는데 초점을 둔다.