• Title/Summary/Keyword: 오염입자 측정

Search Result 223, Processing Time 0.034 seconds

Development of a dispersion coefficient method using a drone-based spatio-temporal hyperspectral image (드론기반 시공간 초분광영상을 활용한 분산계수 산정기법 개발)

  • Gwon, Yeonghwa;Han, Eunjin;Kim, Dongsu;You, Hojun;Kim, Youngdo;Kwon, Siyoone
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2021.06a
    • /
    • pp.112-113
    • /
    • 2021
  • 하천으로 유입되는 오염물질은 유수의 흐름에 따라 이송되며 혼합된다. 이러한 오염물질의 해석을 위해서는 확산 또는 분산계수 산정이 필요하다. 오염물질의 거동과 관련된 실험적 연구는 방사선 동위원소와 형광성 물질을 이용하여 수행되어 왔으나, 추적자 실험은 많은 비용 및 인력을 요하며, 고정식으로 설치한 계측장비로부터 수집한 시계열 농도자료만을 이용하여 분석하기 때문에 공간적 분포에 대한 자료 취득은 어렵다는 한계가 있다. 하천의 오염물질을 모니터링하기 위해서는 공간을 이동하는 입자의 관점에서 물리량을 표현하는 Lagrangian 방식보다 특정 위치에서 물리량 변화를 표현하는 Eulerian 방식이 적합하다. 그러나 드론을 활용한 하천원격탐사 연구의 대부분은 이동식 플랫폼으로 활용되어 특정 시간에 공간적 분광특성의 분포 파악이 한정적이며, 동일 지점에서 분광특성의 시간적 변화를 파악할 수 없다. 따라서 본 연구에서는 기존의 면단위를 측정하는 이동식 플랫폼의 한계를 극복하고 하천 모니터링에 적합한 Eulerian 방식을 적용하기 위하여 CCTV 형태의 고정식 초분광촬영 플랫폼을 도입하였다. 본 연구에서는 하천으로 유입되는 오염물질의 거동을 분석하기 위하여 자연하천에서 형광성물질인 Rhodamine WT를 이용하여 추적자 실험을 수행하였으며, 접촉식 센서를 활용한 농도측정과 동시에 드론과 초분광센서를 활용하여 CCTV 형태의 고정식 초분광영상을 획득하였다. 실험결과 도출된 전통적인 방식의 분산계수 산정과 시공간 초분광영상을 활용한 분산계수 산정을 비교하여 오염물질 거동 분석에 초분광영상 활용의 가능성을 검토하였다. 본 연구에서 제시한 드론기반 시공간 초분광영상 기법을 교량이나 기타 하천구조물에 초분광 센서를 설치하여 CCTV형식으로 활용할 경우, 공단이나 하·폐수 처리장 등의 점오염원이 밀집해 있는 지역에 직접 설치하여 화학사고의 감지 및 오염물질의 유출 확인 및 조류, 부유사 등의 다양한 수질항목의 농도 변화 감지가 가능하고, 수심변화 감지로 장기적으로 활용할 경우 특정 지점에서의 하상변동 조사가 가능하다. 또한, 오염물질의 유출 사고 발생 등의 사람이 직접 접근이 불가능한 지역에 드론을 활용하여 초분광센서를 이용한 오염물질 감지가 가능할 것으로 판단된다.

  • PDF

Characteristics of a Wet Air Cleaning System for Removal of Air Pollutants (습식 공기청정장치의 공기오염물질 제거 특성)

  • Bae, Gwi-Nam;Kim, Yong Pyo;Baik, Nam Jun
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.22 no.1
    • /
    • pp.21-31
    • /
    • 2000
  • Performance characteristics of a wet air cleaning system were investigated experimentally, and discussed in relation with physicochemical properties of the target pollutants. The system is composed of an air cleaner, a separator, and a medium filter. Removal efficiency of the system was measured for ambient particles and gaseous air pollutants: $SO_2$, NO, $NO_2$, HCHO, and $NH_3$. For particle removal test, particles were introduced into the system through a fan, and the particle size distribution was measured at three locations by using two laser particle counters. Particle removal efficiency for each system component was obtained from the particle size distribution. It was found that the separator primarily removed coarse particles greater than $5{\mu}m$ in diameter, and that the medium filter mainly removed fine particles less than $5{\mu}m$ in diameter. For gas removal test, air with gaseous air pollutant was injected into the outlet of the fan, and the concentration was measured both at the upstream of the air cleaner and at the downstream of the separator. It was found that the gaseous species with high Henry's law coefficients, such as $SO_2$, HCHO, and $NH_3$, showed high removal efficiency, but the gaseous species with low Henry's law coefficients, such as NO and $NO_2$, showed low removal efficiencies. It was also found that negative ions were generated from the air cleaner.

  • PDF

Laser irradiation effect of electrophoretically-coated low-voltage phosphor for the application of Field Emission Display

  • 서도석;송병권;김채옥;남창우;홍진표
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2000.02a
    • /
    • pp.152-152
    • /
    • 2000
  • 차세대 평판 디스플레이로 주목박고 있는 FED는 현재 저전압 환경에서 기존의 CRT와 비슷한 해상도와 밝기를 얻지 못하고 있다. 이는 형광체 입자의 표면에 존재하는 결함, 오염, band - bonding과 같은 비발광층과 제조공정 중에 산화되거나 공기중에 노출되어 막 표면이 쉽게 오염되기 때문이다. 따라서 본 연구에서는 전기영동법으로 제작된 형광체의 효율 향상을 위해 레이저 표면 처리효과를 연구하였다. 실험에 사용한 레이저 표면처리 방법은 Nd:YAG pulse(355nm), continuous laser를 이용하였으며 레이저 power와 처리 시간을 변화시키면서 실시하였다. 형광체 막의 표면 두께 측정을 위해 Scanning Electron Microscopy(SEM), 처리된 막의 발광세기를 비교 분석하기 위해 Photoluminescence(PL), Cathodoluminescence(CL) intensity를 측정하였다.

  • PDF

Techniques for Handling Uranium Particles with Micro-tools (미세도구를 사용한 미세크기의 우라늄입자 취급기술)

  • Pyo, Hyung-Ryul;Park, Yong-Joon;Sohn, Se-Chul;Jeon, Young-Shin;Song, Byoung-Chul;Jee, Kwang-Yong;Kim, Won-Ho
    • Analytical Science and Technology
    • /
    • v.13 no.4
    • /
    • pp.440-445
    • /
    • 2000
  • The techniques for manipulation of various micro-tools were essential for particle isolation and chemical analysis of micro-size particles. This report described the detailed techniques for the preparation and handling of several micro-tools. Presence of uranium particles in smeared filter paper were identified by using the solid track detector. The uranium particles were isolated using the micro-tools under the stereomicroscope and then transferred to the filament of TIMS for the determination of isotope ratios.

  • PDF

Measurements of Particles Size Distribution and Average Particle Charge in Operating a Bard Disk Drive (하드디스크 드라이브 동작 시 발생하는 입자 크기분포와 입자당 평균 대전량 측정)

  • Lee Jaeho;Park Dongho;Lee Dae-Young;Yoon Ki-Young;Hwang Jungho
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.29 no.7 s.238
    • /
    • pp.795-804
    • /
    • 2005
  • As the flying height of a slider in a hard disk drive decreases, the slider and disk are more likely to come in contact and generate contamination particles. Since particle contamination can cause serious problems including thermal asperity, it must be prevented to increase storage capacity. When particles are generated in a HDD, particles can be charged and have a few number of elementary charges. In this paper, the size distribution of particles and electrical current due to particle according to the disk rotational speed were measured. Also, the average number of elementary charges was calculated from experimental data. SEM images of particles were obtained by using a particle sampler designed in our laboratory.

인공위성 조립 및 환경시험을 위한 공기 중 부유입자 관리 및 청정실 운영 방안 연구

  • Hwang, Gwon-Tae;Lee, Sang-Hun;Lee, Dong-U;Mun, Gwi-Won;Lee, Sang-Won
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2014.02a
    • /
    • pp.150.2-150.2
    • /
    • 2014
  • 한국항공우주연구원 우주환경시험팀에서는 인공위성의 조립 및 환경시험을 수행하고 있으며, 이를 위한 청정실을 운영하고 있다. 인공위성은 고 진공 및 고온, 극저온의 가혹한 우주환경에서 작동을 하기 때문에 위성표면에 흡착된 오염물질은 위성의 성능 및 효율의 저하를 초래할 수 있다. 또한, 특정 부품은 오랜 시간 높은 온도에서 노출되면 에이징에 의한 기능저하를 초래할 수 있으며, 낮은 습도는 작업 환경에 정전기를 유발하여 부품의 손상을 초래하며, 높은 습도는 부식을 야기할 수 있다. 이에 인공위성의 조립환경은 청정한 환경 및 적당한 온습도 유지가 필수적이다. 이에 본 논문에서는 한국항공우주연구원에서 수행하고 있는 청정실 유지 관리방안 및 공기 중 부유입자 측정원리에 대해 소개하고자 한다.

  • PDF

Decomposition of BTEX by Gas-phase Photo Reactor (기상광반응기를 이용한 BTEX의 분해)

  • Lee, Nam-Hui;Lee, Gang;Hwang, Du-Seon;Kim, Se-Gi;Kim, Seon-Jae
    • Proceedings of the Materials Research Society of Korea Conference
    • /
    • 2003.03a
    • /
    • pp.77-77
    • /
    • 2003
  • 산업화에 따라 각종 산업분야에서 유기 용제의 사용이 증가하게 되었고 대기오염, 수질오염 등의 상태가 심각해져가고 있는 실정이다 그러나 다양해진 오염물질을 처리하는 데 있어서 기존의 산화처리방법은 한계에 달하였고 새로운 처리공정으로 최근 고급산화법(AOP : Advanced Oxidation Process)에 대한 연구가 활발하게 진행되고 있다. 이에 본 연구에서는 대기환경 및 인체에 심각한 영향을 주는 VOCs(Voletail Organic compounds)중 BTEX(Benzene, Toluene, Ethylbenzene, Xylene)를 다양한 형태의 광촉매제를 이용하여 기상 광분해한 후 이에 대한 최적의 분해 조건과 분해율을 비교하고자 하였다. 순환식의 자체 제작한 기상광반응장치를 이용하여, CVD법으로 TiO$_2$ 입자를 알루미나 비드위에 코팅한 볼과 같은 방법으로 유리기판위에 코팅한 판상의 광촉매제 그리고 결정성이 각기 다른 루틸상과 아나타제 그리고 아나타제/루틸 혼합상의 TiO$_2$ 분말을 직접 이용하여 VOCs 농도와 종류, 광원의 종류 및 세기를 변화시켜 PID(Photo ionization Detector)방식의 순환식 VOCs 측정기를 이용하여 광분해율을 실시간으로 측정하였다.

  • PDF

Measurement of Yellow Sand Aerosols Using a Multi-channel LIDAR System During ACE-Asia IOP at Kosan Jeju (ACE-Asia 집중관측기간중 다중채널 라이다를 이용한 제주고산에서의 황사관측)

  • ;;Y.Iwasaka
    • Proceedings of the Korea Air Pollution Research Association Conference
    • /
    • 2001.11a
    • /
    • pp.281-282
    • /
    • 2001
  • 동북아 지역 특히 중국대륙의 경제발전에 따른 에너지 사용량 증가는 다량의 대기오염물질을 방출하고 있다. 한반도에 도달하는 황사현상에서 알 수 있듯이 대기오염물질은 장거리로 이동되어 인접국가의 환경 및 기후변화에 영향을 미친다. 대표적인 장거리이동 대기오염물질인 미세 입자를 포함하는 에어로졸의 물리적ㆍ화학적 성분 및 이동 경로파악은 매우 중요하다. 라이다를 사용하면 지상에서 60km까지의 대기에어로졸 연직분포의 실시간 측정이 가능하다. 본 연구는 ACE-Asia 프로그램 참여를 위해 다중채널 라이다 시스템을 제주도 고산 관측소에 설치하여 2001년 3월부터 운영 중에 있다. (중략)

  • PDF

Adsorption characteristics of Pb by various particle sizes of microplastics in aqueous solution (수용액에서 입자크기에 따른 미세플라스틱의 Pb 흡착특성)

  • Taejung Ha;Minjune Yang
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2023.05a
    • /
    • pp.149-149
    • /
    • 2023
  • 미세플라스틱은 입자크기가 5 mm 이하인 플라스틱으로 정의되며, 수계로 유입된 미세플라스틱은 내분비계 교란물질로 작용하여 생태계에 환경독성을 유발하고 오염물질을 흡착·운반할 수 있는 독성 물질의 매개체로서 미세플라스틱의 위해성에 대한 우려가 증가하고 있다. 본 연구는 수용액에서 다양한 미세플라스틱의 납(Pb) 흡착특성을 평가하고 미세플라스틱의 비표면적에 따른 흡착 효과를 비교하고자 하였다. 플라스틱 종류 중 HDPE (High-density Polyethylene)와 PVC (Polyvinyl Chloride)를 각각 세 가지 크기(Group 1: 2.5 mm - 1.0 mm, Group 2: 1.0 mm - 0.3 mm, Group 3: < 0.3 mm)로 제조하여 분류하였으며, 미세플라스틱 입자크기의 비표면적은 BET(Brunauer, Emmett, Teller)분석을 통하여 측정하였다. 담수환경 조성을 위해 pH 7로 조절한 Pb 용액의 농도(0, 0.5, 1, 5, 10, 30 mg/L)별 흡착실험을 수행하였으며 실험결과를 3가지 흡착등온식(Langmuir, Freundlich, Sips 모델)을 사용하여 미세플라스틱에서 Pb 흡착 거동을 나타내었다. BET 분석 측정결과, PVC의 경우 Group 3 > Group 2 > Group 1 순으로 PVC의 입자크기가 작을수록 비표면적이 크게 나타났으며, HDPE 비표면적 또한 비슷한 경향을 보였다. HDPE와 PVC에서 Pb의 흡착은 Langmuir 모델(R2 > 0.97)과 Freundlich 모델(R2 > 0.82)보다 Sips 모델(R2 > 0.98)이 흡착 거동을 설명하기에 가장 적합하였다. 최대흡착능(Qm) 상수는 입자크기가 작아질수록 흡착능이 높아지는 추세를 보였으며, 흡착세기(KF)와 흡착강도(n-1)는 각 플라스틱의 Group 3(HDPE KF = 0.028, PVC KF = 0.032; HDPE n-1 = 0.225, PVC n-1 = 0.547)에서 가장 높게 나타났다. 본 연구를 통해 HDPE와 PVC에서 Pb의 흡착특성은 Sips모델로 설명이 가능했으며, 이에 따라 Pb 흡착과정에 복수의 흡착메커니즘이 작용하고 있음을 유추해볼 수 있었다. 미세플라스틱의 입자크기와 비표면적이 Pb 흡착량에 영향을 미치는 것을 알 수 있었으며, 미세플라스틱이 중금속을 흡착하여 생물체 내로 전이시킬 수 있는 매개체 역할의 가능성을 확인하였다.

  • PDF

Determination of Microfiltration Membrane Fouling Characteristics by Liquid Displacement Method (액체전이법을 이용한 정밀여과막 오염의 특성 평가)

  • 장규만
    • Membrane Journal
    • /
    • v.9 no.4
    • /
    • pp.221-229
    • /
    • 1999
  • The nominal pore size 0.2 ${\mu}m polytetrafluroethylene(PTFE, Satorius Co,) membrane was used for the filtration of 0.1 wt% kaolin, bentonite, yeast, and starch solution, respectively. After filtration, the membrane was cleaned and the pore size was measured by liquid displacement method(LDMl using water/iso-butanol system. The pore size for new PTFE membrane evaluated by LDM was comparable with those of which were measured by mercury porosimetry and scanning electron microscope. The membrane pores were severely fouled, and constricted to below 0.3 ${\mu}m in the cases of bentonite and starch solution which contained smaller particles than pores. However, in the case of kaolin - solution, only some parts of membrane pores above 0.35 ${\mu}m were slightly fouled. Hence, the phenomena of membrane fouling could be identified quantitatively by the evaluation of pore size using LDM.

  • PDF