• The Science & Technology
• /
• v.29 no.6 s.325
• /
• pp.76-77
• /
• 1996

중국발원 대기오염 물질이 한반도에 유입된다는 사실을 세계 최초로 발견하여 그 원인을 규명한 한국교원대 정용승교수. 그는 83년이래 인공위성 관측자료를 통해 황사 및 대기오염 물질이 중국에서 황해를 거쳐 한반도에 유입되어 황산비 발생의 원인이 중국 대기오염물질이 기인함을 밝혀냈다.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.32 no.2
• /
• pp.15-25
• /
• 2024

In this study, the regeneration effect of pressurized water and ultrasonic cleaning was investigated for contaminated filter cloth from the sewage sludge filter press process. For this purpose, contaminated filter cloth was collected from a 3-ton sewage sludge hydrothermal carbon treatment filter press. First, the contamination characteristics were analyzed. According to the location of the filter cloth, air permeability and unit mass were measured, and compared with the values of a new filter cloth. Next, the results were mapped over the entire area to evaluate the contamination characteristics. Finally, pressure cleaning at 3 bar and ultrasound at frequencies of 34, 76, 120, and 168 kHz were performed on the contaminated filter cloth. In addition, the cleaning efficiency was evaluated by 3 levels of contamination degree. As a result, pore contamination occurred mainly at the bottom and both sides of the filter cloth, where the filter material was continuously injected and compressed. Surface contamination appeared evenly over the entire area. As a result of washing, air permeability increased by 1.3-3.1%p and contaminant removal was by 2.7-4.4% under pressure. In ultrasonic cleaning, air permeability increased by 12.5-61.5%p and contaminants were removed by 2.7-29.2%. In ultrasonic cleaning the lower the frequency, the higher air permeability and contaminant removal rate. Also, The higher pore contamination level, the better the air permeability improvement and contaminant removal.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.05b
• /
• pp.411-412
• /
• 2003

일반적으로 공단지역의 경우 대기 중으로 배출된 다량의 대기오염물질이 대기정체 조건 하에 국지적으로 축적되어 고농도 현상이 나타나게 된다. 하지만 국지순환이 뚜렷이 나타나는 지역의 경우 대기오염물질의 지역적 수송현상을 경험하게 되며 풍하측 고농도현상이 빈번히 나타나게 된다. 이러한 대기오염물질 수송현상은 연안에 인접한 공단지역에서 보다 뚜렷이 나타나는데, 이것은 육풍 효과에 의해 바다로 밀려간 기괴내의 대기오염물질이 수면의 낮은 침적에 의해 (Entwistle et al, 1997) 일정 농도로 유지되고 다시 해풍에 의해 기괴가 내륙으로 수송되기 때문이다. (중략)

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.11a
• /
• pp.79-80
• /
• 2003

대기환경 개선대책으로 인해 TSP와 PM$_{10}$의 농도는 안정된 경향을 나타내고 있으나, 미세먼지(PM$_{2.5}$)와 같은 2차 대기오염물질의 오염도는 오히려 증가하고 있는 추세에 있으며, 최근 대기오염물질에 대한 관심의 증가는 2차 오염물질(Secondary air pollutants)로 분류되는 오존과 미세먼지에 대한 연구가 활발히 진행되고 있다. 특히 이들 미세먼지는 대부분 가스상 물질로 배출된 대기오염물질이 대기중에서 광화학반응(Photochemical reaction)이나 각종 상변화를 거쳐 생성되기 때문에 그 생성기작이 복잡한 것으로 알려져 있다. (중략)략)략)

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.14 no.2
• /
• pp.108-115
• /
• 2002

Pollutants discharge modeling was carried out in the watershed of Mankyung and Dongjin rivers. The watershed and pollutants source information extracted and analysed by the GIS tool was used as the model input parameters. This model was calibrated by comparison of the measured and computed monthly freshwater discharge and water quality(WQ) concentration. The compared WQ data are the ten-year-mean WQ concentration and monthly WQ concentration in 1999. The results show that the watershed runoff is underestimated in summer season, although the seasonal trends are relatively well estimated. The WQ concentrations were also relatively well estimated except Iksancheon. The computed concentration was much lower than the observed concentration in Iksancheon because of the effect of polluted sediment. Thus, the effects of polluted sediment on water column need further study through measuring and analysing the degree of the sediment contamination.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.8 no.4
• /
• pp.153-159
• /
• 2000

Large-scale simulated lysimeter experiments were conducted for 4 years as a fundamental study to develop enhanced landfill stabilization method, which accelerate stabilization time and make efficient practical use of self-purification capacity of pollutants in semi-aerobic solid waste landfill. The amount of TOC(total organic carbon) decomposition increased as the landfill depth increased. In case of T-N(total nitrogen), the self-purification capacity increased linearly with the landfill thickness until it reached a maximum level of 6 m. Beyond this level, the self-purification capacity was not increased. The results from lysimeter experiments indicate that 6m of landfill thickness is optimum for self-purification capacity of pollutants considering the mass balance of TOC and T-N.

• Journal of Korean Society of Transportation
• /
• v.31 no.2
• /
• pp.69-79
• /
• 2013

This study suggests a specific methodology to analyze how emission impacts on regional emission concentrations in accordance with the change of weather conditions, and the need of its application. The suggested methodology was applied to a transportation network of Pochun area in Gyenggido as an example. The methodology contains two types of analytical models; 1) dispersion analysis based on emission from traffic, and 2) dispersion analysis based on the combination between emission from traffic and existing emission in the air. By doing so, it is expected that the comprehensive influence of emission on traffic network and its surrounding areas can be identified. In addition, it might be useful for us to apply environmental risk assessment based on the effect of emission on the people.

• Journal of Wetlands Research
• /
• v.8 no.4
• /
• pp.23-31
• /
• 2006

The nonpoint pollutants are originated from various land uses. Of the landuses, the development means the changes of the soil cover and the increases of imperviousness rate, which will increase the nonpoint pollutant emissions during a storm. Therefore, the Ministry of Environment in Korea has programed TPLMS(Total Pollution Load Management System) for four major large rivers to improve the water quality in rivers by controling the total pollutant loadings from the watershed area. The study area was forest landuse before development plan, however it is now changing to the resort. Some of the forest areas will be changed to parking lots, roads and buildings. The paved areas are highly polluted landuses because of high pollutant accumulation rate by vehicle activities during dry periods. Therefore, this research is achieved to determine the changes of pollutant loading rate by development plan and to provide the best management practices for controlling nonpoint pollutants.

• International Journal of Highway Engineering
• /
• v.9 no.4
• /
• pp.185-192
• /
• 2007

Newly constructed road is a requisite to be able to carry out BMPs (Best Management Practices) under TMDL(Total Maximum Daily Load) program of the Ministry of Environment. BMPs require pollutant source control during road construction and wash off reduction plan as well as maintenance practices subsequent to construction on the purpose of discharging the minimum wash off non-point source pollutants. The objective of this study is to provide supportive discharged data in evaluating the discharged non-point pollutant load from a highway toll gate area. It can be applied to manage non-point source pollutants on roads. The results validate the first flush phenomenon that it is known to be one of the wash off characteristics in paved area. In addition, the load per unit area and load per unit rainfall duration applying EMC are calculated. The mean load per unit rainfall duration is assessed to be $533.7mg/m^2-hr$ for TSS, $396.2mg/m^2-hr$ for COD, $17.0mg/m^2-hr$ for TN, and $4.8mg/m^2-hr$ for TP. These results show the unitload taken from monitoring are higher than the unit load suggested in the TMDL. It is important to adopt real pollutant unit for road to be able to perform BMP successfully.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.1
• /
• pp.14-24
• /
• 2016

Information on the lists of pollutants from industrial wastewater discharge are essential not only to specify the key pollutants to be managed in permission process but to design the treatment facilities by the dischargers. In this study, wastewater quality analysis was conducted for three industrial categories including the specified hazardous water pollutants. The general description of the wastewater occurrence, major sources, treatment facilities are also investigated to obtain integrated database on the pollutant inventories for the industrial categories. In addition Based on the analysis of raw wastewater and final effluent, the detected pollutant items are confirmed by analyzing their presence in the raw or supplement materials, the potential of formation as byproducts, and the possibility of inclusion as impurities. The three industrial categories include petrochemical basic compounds, basic organic compounds, and thermal power generation. The water pollutants emitted from petrochemical basic compound manufacturing facilities are 31 items including 16 specified hazardous water pollutants. Basic organic compound manufacturing facilities discharge 30 kinds of pollutants including 14 specified hazardous water pollutants. Thermal power generation facilities emit 20 pollutants, 8 specified hazardous water pollutants among them. These substances were decided as emission inventories of water pollutants finally through the probability evaluation. The compounds detected for each categories are screened through investigation on the possible causes of their occurrence and confirmed as the final water pollutant inventories.