• Clean Technology
• /
• v.27 no.1
• /
• pp.39-46
• /
• 2021

A road structure washing vehicle equipped with a 4 HP, 80 LPM ultrafine bubble generator was used to clean a tunnel wall and the surface of the surrounding structure, consisting of concrete and tiles, in a heavy traffic area around an apartment complex in the city. Ultrafine bubbles were generated by supplying air at 2 to 3 LPM and using a specially designed nozzle, whereas fine bubbles made by an impeller in a gas-liquid mixing self-priming pump were produced with an average diameter of 165.4 nm and 6.81 × 107 particles mL-1. Using a high pressure washer gun that can perform high-pressure cleaning at 150 bar and 30 LPM, ultrafine bubbles were used to wash dust adsorbed on the surface of the road structures. The experimental analysis was divided into before and after washing. The samples were analyzed by applying ISO 8502-3 to measure surface contamination of dust adsorbed on the surface. Using the transparent tape attached to the surface, the removal rate was calculated by measuring the weight of the dust, and the number of particles was calculated using the gravimetric method and the software, ImageJ. The results of the experiment showed that the number of dust particles adsorbed on the tile wall surface before and after washing were 3,063 ± 218 particles mL-1 and 20 ± 5 particles mL-1, respectively, with weights of 580 ± 82 mg and 13 ± 4 mg. Particles on the surface of the concrete structure before and after washing were 8,105 ± 1,738 particles mL-1 and 39 ± 6 particles mL-1, respectively, with weights of 1,448 ± 190 mg and 118 ± 32 mg.

• Journal of Food Hygiene and Safety
• /
• v.35 no.6
• /
• pp.552-560
• /
• 2020

Listeria monocytogenes is a highly pathogenic gram-positive bacterium that is easily isolated from cheese, meat, processed meat products, and smoked salmon. A zero-tolerance (n=5, c=0, m=0/25 g) criteria has been applied for L. monocytogenes in cheese meaning that L. monocytogenes must not be detected in any 25 g of samples. However, there was a lack of scientific information behind this criteria. Therefore, in this study, we conducted a risk assessment based on literature reviews to provide scientific information supporting the baseline and to raise public awareness of L. monocytogenes foodborne illness. Quantitative risk assessment of L. monocytogenes for cheese was conducted using the following steps: exposure assessment, hazard characterization, and risk characterization. As a result, the initial contamination level of L. monocytogenes was -4.0 Log CFU/g in cheese. The consumption frequency of cheese was 11.8%, and the appropriate probability distribution for amount of cheese consumed was a Lognormal distribution with an average of 32.5 g. In conclusion, the mean of probabilities of foodborne illness caused by the consumption of cheese was 5.09×10-7 in the healthy population and 4.32×10-6 in the susceptible population. Consumption frequency has the biggest effect on the probability of foodborne illness, but storage and transportation times have also been found to affect the probability of foodborne illness; thus, management of the distribution environment should be considered important. Through this risk assessment, scientific data to support the criteria for L. monocytogenes in cheese could be obtained. In addition, we recommend that further risk assessment studies of L. monocytogenes in various foods be conducted in the future.

• Journal of the Korean earth science society
• /
• v.42 no.6
• /
• pp.623-631
• /
• 2021

The increased transport of marine hazardous and noxious substances (HNS) has resulted in frequent HNS spill accidents domestically and internationally. There are about 6,000 species of HNS internationally, and most of them have toxic properties. When an accidental HNS spill occurs, it can destroys the marine ecosystem and can damage life and property due to explosion and fire. Constructing a spectral library of HNS according to wavelength and developing a detection algorithm would help prepare for accidents. In this study, a ground HNS spill experiment was conducted in France. The toluene spectrum was determined through hyperspectral sensor measurements. HNS present in the hyperspectral images were detected by applying the spectral mixture algorithm. Preprocessing principal component analysis (PCA) removed noise and performed dimensional compression. The endmember spectra of toluene and seawater were extracted through the N-FINDR technique. By calculating the abundance fraction of toluene and seawater based on the spectrum, the detection accuracy of HNS in all pixels was presented as a probability. The probability was compared with radiance images at a wavelength of 418.15 nm to select abundance fractions with maximum detection accuracy. The accuracy exceeded 99% at a ratio of approximately 42%. Response to marine spills of HNS are presently impeded by the restricted access to the site because of high risk of exposure to toxic compounds. The present experimental and detection results could help estimate the area of contamination with HNS based on hyperspectral remote sensing.

• Journal of the Korean earth science society
• /
• v.43 no.1
• /
• pp.140-150
• /
• 2022

This paper focuses on introducing the concept of the multi-scale study on the Ulleungdo-Dokdo Volcanic Group in the East Sea and recent new findings from it. Multi-channel seismic reflection data reveals that the major volcanic activities of the Ulleungdo-Dokdo Volcanic Group took place between 5 and 2.5 Ma, which were propagated from Isabu Tablemount on the eastern end to the Ulleung Island on the western end. The terrestrial Ulleung Island was built via 5 stages, which eventually formed a 3 km-wide caldera, named Nari Caldera, and a volcanic dome, named Albong, within the caldera. The Albong and the unit N-1, the earliest phreatomagmatic explosive phase of the Albong volcano, were generated from a new magma injected into the existing phonolitic body. The generally trachyandesitic bulk rock composition of the pumice in unit N-1 and Albong is attributed to the contamination of the new magma by mafic cumulates at the base of the existing phonolitic chamber. The lines of evidence of a new magma injection point toward that Ulleung Island is an active volcano with a live subvolcanic magma plumbing system.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.48 no.2
• /
• pp.135-146
• /
• 2022

In order to prevent microbial contamination and safely use cosmetics, it is essential to possess preservative power. In this study, the antifungal effect was confirmed by improving the preservative system of the aqueous dispersion formulation, which has a weak preservative power against fungi, and various preservative systems were established to strengthen the preservative power against fungi. Five kinds of raw materials (sodium anisate, p-anisic acid, caprylhydroxamic acid, o-cymen-5-ol, hydroxyacetophenone) that have a benzene ring structure having a hydroxyl group and exist as protonated form in cosmetic formulations expected to improve antifungal activity in cosmetics were selected, and the minimum growth inhibitory concentration of the raw materials was determined through MIC assay. It was confirmed that the preservative power against mold was improved through the preservative efficacy test of 4 types of water dispersion formulations (cream, lotion, toner, and sun cream) in which 4 types of raw materials showing antimicrobial activity against mold were added to the preservative system. When p-anisic acid was used, it was confirmed that the preservative activity against mold was strengthened without the effect of inhibiting the preservative power against bacteria and yeast in all four formulations.

• Korean Journal of Pharmacognosy
• /
• v.53 no.3
• /
• pp.170-180
• /
• 2022

Polycyclic aromatic hydrocarbons(PAHs) contents were analyzed by measuring benz(a)anthracene(BaA), chrysene(Chr), benzo(b)fluoranthene(BbF) and benzo(a)pyrene(BaP), and the related risk characterization was conducted for 113 samples out of 14 different agricultural products used for food and medicine. Detection rate of PAHs was 90.3% as a whole, and the highest one was 80.5% for BaP. The detection rate of BaP exceeding the maximum permitted concentration of Rehmanniae Radix Preparata and Rehmanniae Radix, 5.0 ㎍/kg was 1.8%, and the detection rates of BaA, Chr and BbF were within the range of 2.7~10.6%. The highest average concentration of BaA was 3.41 ㎍/kg detected from Lycii Fructus, while those of Chr, BbF, BaP and PAH4(sum of detected BaA, Chr, BbF and BaP) were 5.00, 1.79, 2.36, 12.36 ㎍/kg, respectively, detected from Rehmanniae Radix Preparata. As for the risk characterization on PAHs, the overall MOE(Margin of Exposure) values were measured within the range of 10⁵~10⁷, which is unlikely to cause direct health concerns, but the worring values of MOE were measured 6.57×10⁴ for BaP and 6.10×10⁴ for PAH4 from Rehmanniae Radix Preparata, which may require an improvement plan to reduce BaP contents.

• Korean Journal of Food Science and Technology
• /
• v.53 no.4
• /
• pp.495-500
• /
• 2021

This study investigated the prevalence, serotypes, virulence genes, and antimicrobial resistance patterns of Listeria monocytogenes isolates collected from salmon products. A total of 16 out of 65 salmon products (24.6%) were positive for L. monocytogenes. Bacteria were most frequently identified in smoked salmon products (15/53, 28.3%). Serological tests revealed that serotype 1/2b (62.5%) was the predominant serotype of L. monocytogenes, followed by 1/2a (37.5%). All isolates harbored 10 virulence-associated genes (inlA, inlB, plcA, plcB, hlyA, actA, prf, fbpA, iap, and mpl), confirming their potential pathogenicity. The isolates of L. monocytogenes showed resistance to cefotetan (100%), cefotaxime (87.5%), cefepime (31.3%), erythromycin (6.3%), and tetracycline (6.3%); however, most of the strains were susceptible to antimicrobials except cephalosporins. These results provide useful information regarding the contamination of salmon products with L. monocytogenes, which may have implications for public health.

• Journal of Mushroom
• /
• v.20 no.3
• /
• pp.153-162
• /
• 2022

The purpose of this study was to breed a variety of stable productivity and high storage characteristics of white Hypsizygus marmoreus, which has high demand at domestic and global market due to a low bitter taste and the preference for white species. Accordingly, 'Baekmaru' was bred by hybridizing brown and white cap color species and backcrossing with white species. The 'Baekmaru' variety was bred by crossbreeding the brown and white species and backcrossing the white species. Through repeated cultivation of 'Baekmaru', a variety with a low contamination rate was selected when culturing the spawn for stable cultivation. As a results of demonstration test, the yield of 'Baekmaru' was 14% higher than that of the commercial variety. In addition, among the fruiting body characteristics of 'Baekmaru', diameter and thickness of the pileus were 16.43±15.27mm and 6.46±0.58mm, which were slightly higher than the commercial variety, and the hardness was 2.69±0.89N for the pileus and 3.09±0.89N for the stipe. The shelf life showed less change in thickness and color of pileus compared to commercial variety. The hardness of pileus of 'Baekmaru' was maintained in the range of 3.5 to 4.0N in the 4℃ and 4℃ and 20℃ mixed treatment until 30 days of storage, and was higher than that of the commercial variety. Therefore, it was suggested to be excellent in storability.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.38 no.3
• /
• pp.138-149
• /
• 2022

The clinical applicability of ceramics can be increased by analyzing the causes of fractures after fracture testing of dental ceramics. Fractography to analyze the cause of fracture of dental ceramics is being widely applied with the development of imaging technologies such as scanning electron microscopy. Setting the experimental conditions is important for accurate interpretation. The fractured specimens should be stored and cleaned to avoid contamination, and metal pretreatment is required for better observation. Depending on the type of fracture, there are dimple rupture, cleavage, and decohesive rupture mainly observed in metals, and fatigue fractures and conchoidal fractures observed in ceramics. In order to reproduce fatigue fracture in the laboratory, which is the main cause of fracture of ceramics, a dynamic loading for observing slow crack growth is essential, and the load conditions and number of loads must be appropriately set. A typical characteristic of a fracture surface of ceramic is a hackle, and the causes of fracture vary depending on the shape of hackle. Fractography is a useful method for in-depth understanding of fractures of dental ceramics, so it is necessary to follow the exact experimental procedure and interpret the results with caution.

• Journal of the Korean GEO-environmental Society
• /
• v.23 no.9
• /
• pp.17-23
• /
• 2022

Using cement as a road subbase is economical, easily modified and supplemented and has excellent road pavement quality control. In addition, cement adheres well to sandy soils without adhesion, and it plays a role of permanently preserving adhesion in viscous soils with adhesion, so it can be widely applied as stable treatment with the advantages of increased strength, reduced compressibility. and improved durability. However, while cement is excellent in terms of strength for a road subbase, the material properties mean that it is difficult to maintain and reinforce when cracks or fractures occur due to dry shrinkage, and the pH increases in the ground due to hexavalent chromium eluting from cement. which can cause environmental problems such as groundwater contamination. Therefore, this study evaluates the usability of alternatives in the road base layer such as environmentally cementitious stabilizer and on-site soil generated from the site. We intend to reduce the environmental damage and evaluate the durability. To evaluate the applicability of the site, Environmental stability test and freeze-thaw test and wetting-drying test was conducted to evaluate the strength characteristics of alternative materials on the road through the limited performance evaluation of environmentally cementitious stabilizer. The test ranges were set at mixing ratios of 10%, 20%, and 30% and ages of three days, and 28 days old to evaluate the early strength and reference strength according to the mixing ratio of the environmentally cementitious stabilizer.