• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1804_1805
• /
• 2009

최근 여러 산업 분야에서는 품질의 향상과 생산성을 높이기 위해 자동화 검사 장치 개발이 활발하게 연구 되고 있다. 본 연구에서는 비전을 이용한 신뢰도 높은 슬라브(Slab) 표면 검사 자동화 알고리즘의 전처리 단계인 오실레이션 마크(Oscillation mark) 검출을 목표로 한다. 슬라브 영상의 경우 조업시에 발생하는 산화 물질인 스케일(Scale)이 영상 전체에 분포하고 있으며, 이러한 스케일은 형태적 특징 및 밝기 특징이 일정치 않기 때문에 오실레이션 마크 검출 성능을 저하 시킨다. 따라서 스케일의 영향을 최소화 하고 효과적으로 오실레이션 마크를 검출하기 위해 가버 필터(Gabor filter)와 수직 투영 프로파일(Vertical projection profile)을 이용한 노이즈 제거 방법을 사용한다.

• Proceedings of the KIEE Conference
• /
• 2008.04a
• /
• pp.131-132
• /
• 2008

오실로메트릭 방법으로 휴대용 혈압 측정 시 빈번하게 발생하는 잡음에 의한 오실레이션 신호의 왜곡을 줄이기 위해 새로운 잡음 제거 알고리즘을 제안하였다. 제안된 잡음 제거 알고리즘은 선형 예측기 구조 기반의 적응 필터를 이용한다. 제안된 잡음 제거알고리즘의 성능을 평가하기 위해 왜곡된 오실레이션 신호에 선형보간법을 사용하는 기존의 방법과 적응 필터를 사용하는 제안된 방법을 적용하여 잡음 제거 성능을 비교하였다. 제안된 방법은 잡음이 오실레이션과 중첩되어 나타난 경우에 기존의 방법과 달리 잡음에 강인한 특징을 보여주었다.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.7 no.1
• /
• pp.50-54
• /
• 2014

This study presents a method for heart rate detection using oscillation wave signal and tries to enhance the performance of peak detection. For this objective, the method uses the average slopes around the main peak. The crossing point of the increasing and the decreasing slopes is selected as the peak point of heart rate period. The proposed method showed smoothed heart rate graph and reduced irregularity in heart rate values.

• Journal of IKEEE
• /
• v.26 no.4
• /
• pp.553-559
• /
• 2022

In this paper, RC snubber circuit design technology for oscillation suppression in half-bridge configuration of cascode gallium nitride (GaN) field effect transistors (FETs) is analyzed. A typical wide band-gap (WBG) device, cascode GaN FET, has excellent high-speed switching characteristics. However, due to such high-speed switching characteristics, a false turn-off problem is caused, and an RC snubber circuit is essential to suppress this. In this paper, the commonly used experimental-based RC snubber design technique and the RC snubber design technique using the root locus method are compared and analyzed. In the general method, continuous circuit changes are required until the oscillation suppression performance requirement is met based on experimental experience . However, in root locus method, the initial value can be set based on the non-oscillation R-C map. To compare the performance of the two aforementioned design methods, a simulation experiment and a switching experiment using an actual double pulse circuit are performed.

• Proceedings of the KWS Conference
• /
• 2006.10a
• /
• pp.265-267
• /
• 2006

• Proceedings of the KWS Conference
• /
• 2007.11a
• /
• pp.79-81
• /
• 2007

• Proceedings of the KWS Conference
• /
• 2007.11a
• /
• pp.291-293
• /
• 2007

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.10a
• /
• pp.451-454
• /
• 2000

Invasive methode and Non-invasive methode are used in blood pressure measurement. The Invasive methode can Set the correct measured blood pressure but, it has patient feels uncomfortable. So most of cases use Non-invasive methode. The Oscillometric method is commonly apply to modem electric sphygmomanometer and using various algorithm. In this paper describe about a algorithm it control and to determinate the cuff pressure, and filtering that data for measure the blood pressure. The communicating with personal computer can pressure deflation is by Solenoid valve and it uses RS-232 system in packet communication. The main using algorithm for blood pressure measurements are maximum amplitude algorithm and oscillometric algorithm. MAA(maximum amplitude algorithm) has various measured oscillation it depend on patient's age, height, weight and arm circumference size. In this paper, 1 studied the various measured oscillation apply to characteristic ratio and can get the result of systolic blood pressure, diastolic blood pressure, mean blood pressure. It was not used same ratio to measuring oscillation. In the MAA(maximum amplitude algorithm), we hope for reduce the difference with the real blood pressure and the measured blood pressure, when it applied with various specific ratio.

• Journal of Biomedical Engineering Research
• /
• v.21 no.4
• /
• pp.411-417
• /
• 2000

This paper describes the analysis of the oscillometric method based on the shape of arterial pressure and proposal of a new algorithm for estimating the blood pressure by computer simulation. In the first step, the arterial pressure model which is able to control the shape of arterial pressure was designed and then we simulated the oscillometric model using both the existing exponential model showing the static arterial pressure-volume relation and the designed arterial pressure model. By analyzing the correlation of characteristic ratio based on the shape of arterial pressure, we could find that the characteristic ratio was not the only standard parameter for estimating systolic and diastolic pressure. We were able to estimate the shape of arterial pressure by computing the correlation of arterial pressure shape with oscillation shape. Finally, we proposed an algorithm which is able to estimate systolic and diastolic pressure according to pressure(Pp) table constructed from the relation of maximum amplitude of oscillation and arterial pressure shape. We tested 60 arterial pressure waveforms having various arterial pressure shape and pulse. As a results, the absolute deviation average values of the estimation of systolic, diastolic and mean pressure were 1.62%, 2.40% and 2.20%, respectively. In conclusions, the proposed algorithm showed the possibility of usefullness in estimating the blood pressure.

• Proceedings of the KIPE Conference
• /
• 2013.11a
• /
• pp.7-8
• /
• 2013

본 논문에서는 영전압 스위칭 탭인덕터 부스트 컨버터를 제안한다. 기존 컨버터는 DCM구간에 MOSFET의 Coss과 RC 스너버 및 탭인덕터의 공진에의해 MOSFET 양단에 전압 오실레이션이 발생하면서 턴온 시점에 따라 MOSFET 발열이 결정된다. 그래서 부하 변동과 부품편차와 무관하게 항상 최저전압조건에서 턴온하여 MOSFET의 발열을 저감하는 회로를 제안한다. 본 논문에서는 제안된 부스트 컨버터의 동작원리를 이론적으로 해석하고, 시제품 제작 및 실험을 통해 타당성을 검증한다.