• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 광주전남지부
• /
• pp.58-62
• /
• 2006

The purpose of this paper is characteristic analysis of permanent magnet generator (PMG) for automatic voltage regulator (AVR)power of brush less synchronous generator. However, this PMG has a spoke type permanent magnet rotor with large overhang for high power density, characteristic analysis considering concentration effect of air-gap flux density due to the overhang should be performed. 30 transient finite element method (FEM)analysis is good solution for overhang parameter, but this method needs too much calculation time. In this paper, we examined the overhang effects based on overhang length and material of rotor core by using 20 and 30 static FEM analysis, and proposed 20 dynamic FEA model considering overhang parameter which gives good and rapid results. The proposed method is verified by the test results of no load, load and short circuit test.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.3-5
• /
• 2005

The overhang parameter is required to maximize the power density of generator. However, the use of overhang design causes the rise of material cost. Moreover there is somewhat different overhang effect according to the rotor types. This paper presents the overhang effect on the overhang length according to the rotors with permanent magnet of generators. To examine the phenomenon of overhang effect, the new dynamic analysis method with 2D FEM is suggested and verified by the test results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1174-1176
• /
• 2005

The permanent magnet(PM) overhang effect has been generally used to enhance the linkage flux in the motor. In this paper, we quantitatively investigate the PM overhang effect in the new type axial flux permanent magnet(AFPM) motor with a double-sided airgap. The motor performances such as linkage flux, back electromotive force(EMF), magnetic force, etc. were analyzed according to the variation of the overhang angle. From the results, we can select the proper overhang angle of PM which improves the performance of the AFPM motor.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1306-1308
• /
• 2005

The characteristic of line start permanent magnet(LSPM) motor with overhang structure is analyzed using 3dimensional finite element method(3D FEM). We propose the appropriate overhang length by considering the magnetic flux distribution according to changing overhang length and manufacturing process. 3D FEM analysis is inevitable because the increase of the total flux cannot be appropriately considered in 2D FEM. In equal model specification total flux is recalculated at 3D FEM, because of considering lamination length. This paper compares the characteristic of Back-emf with and without overhang by permanent magnet that has identical volume.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1998년도 제15회 음성통신 및 신호처리 워크샵(KSCSP 98 15권1호)
• /
• pp.465-469
• /
• 1998

가변 전송율 음성 부호화기를 위한 음성 검출기를 통계적 모델을 적용하여 설계한다. 제안된 음성 검출기는 음성 파라미터를 decision-directed 방식으로 추정함으로써 LRT를 이용하여 동작 특성이 우수한 판정 규칙을 유도한다. 또한 음성 발생 사건들을 1차의 Markov process 로 모델링 함으로써 과거의 관찰들을 현재 프레임의 음성 검출 과정에서 고려할 수 있는 행오버 알고리즘을 개발한다. 개발된 음성 검출기는 고려된 실험환경에서 ITU-T 표준인 G.729 Annex B 음성 검출기보다 맹 우수한 성능을 나타내었다.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2003년도 가을 학술발표논문집 Vol.30 No.2 (1)
• /
• pp.334-336
• /
• 2003

본 논문에서는 차세대 인터넷 서버의 멀티미디어 파일 시스템인 Content Container파일 시스템(CCFS)의 로그 기반 회복 기법을 설계하고 구현한 내용에 대해 기술한다. CCFS에서는 트랜잭션들이 개별적으로 로깅 할 수 있도록 함으로써 동시성을 높이면서 트랜잭션 수행 중에 로깅으로 인한 오버헤드를 줄인다. 그리고 로그 파일을 순환 구조로 사용할 수 있도록 효율적인 관리를 제공한다. 또한 시스템 고장이 발생하였을 때 로그 파일을 한번만 스캔하면서 완료한 트랜잭션에 대한 로그를 재수행함으로써 시스템의 빠른 회복과 재시작을 보장한다.

• 대한기계학회논문집A
• /
• 제26권12호
• /
• pp.2605-2614
• /
• 2002

This paper describes an analysis method based on the experimental parameter for the 0.9kW starter motor of vehicle with permanent magnet and pole core, and analyzed the influence by the effect of pole core of starting motor by using the 2D-FEM analysis technique to reflect the structural characteristic of 3D. A starter motor consists mainly of armature, yoke and permanent magnet with the pole core. Additionally, there is different the axial length of each part. Therefore, the effective of analysis method is needed to improve the characteristic of it. This paper approached the 2D-FEM analysis estimated by the 3D-EMCN(Three Dimensional Equivalent Magnetic Circuit Network) instead of the 3D-FEM analysis to minimize parameters. As a result, this paper is proposed the validity of 2D-FEM analysis and obtained reasonable results for improving a performance.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제55권7호
• /
• pp.346-352
• /
• 2006

In Brushless DC Motor, there are Permanent Magnets (PMs) with driving circuit and sensor for detecting to rotor position and rotation speed. In the case of using hall IC sensor which response to magnetic flux, that is required to additional sensor magnet for rotor position detecting. Most of BLDC motor, However, take asymmetrical overhang of PM in rotor instead of additional sensor magnet for operating of hall IC sensor. The asymmetrical overhang of PM occur rotor thrust to z-axis direction that is lead to not only damage of bearing but also intensive noise and vibration. Therefore, the analysis of magnet overhang effect in the side of vibration and drive to hall If sensor is required to precise. In this paper, 2-D Finite Element Method is used to solve precise field computation and thrust of z-axis direction considering asymmetrical magnet overhang. And also the z-axis thrust from the analysis result is compared to experimental result. In conclusion, the purpose of this paper minimize to noise and vibration of BLDC Motor as analyzes to asymmetrical magnet overhang effect.

• 한국정밀공학회지
• /
• 제26권4호
• /
• pp.107-113
• /
• 2009

In this paper, we studied of measurement the vibration of natural frequency using optical fiber sensor. The boring bar for measurement of vibration in use optical fiber sensor has the advantage of direct measure for the frequency than accelerometer. Because it deal with output value on electrical signal of optical fiber in physical disturbance when it measures the frequency of vibration. The optical fiber sensor measured the vibration of boring bar by the gap in sensing jig while optical fiber just kept contact with boring bar. A prototype system was composed of jig part with gap and optical system part. In this paper, we found out the possibility to measurement of vibration by the gap in use optical fiber.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제53권4호
• /
• pp.229-236
• /
• 2004

In this paper, the effect of permanent magnet overhang structure on the characteristics in Brushless DC motor has analyzed quantitatively. We classified the overhang structure as symmetric and asymmetric. 3D equivalent magnetic circuit network (EMCN) method which uses the permeance as the distributive variable is used for the efficient analysis of magnetic field. The overhang effect which increases the linkage flux at the stator is verified by comparison between overhang and no overhang structure. In addition, it is known that no load back electro motive force (EMF) is also increased due to the overhang effect. In case of asymmetric overhang structure, the ratio effect of the upper to lower overhang length on the magnetic forces is analyzed. Form the analysis results, the variation of the asymmetric overhang ratio has a significant effect on the axial magnetic force except the radial and tangential magnetic forces. The validity of the analysis results is also clarified by comparison between calculated results and measured ones such as back EMF and cogging torque.