• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.5
• /
• pp.957-963
• /
• 2015

The autocorrelation of an alternative binary offset carrier (AltBOC) signal provides an improved positioning accuracy because of its narrow main-peak. However, The AltBOC signal has a disadvantage that the autocorrelation of the AltBOC signal has multiple side-peaks which incur a severe positioning error. In this paper, we propose a generating method of an unambiguous correlation function for AltBOC signal tracking. Specifically, we first obtain symmetric partial correlation functions, and subsequently, we obtain an unambiguous correlation function by combining them. In numerical results, it is confirmed that the proposed correlation function provides better tracking error standard devation (TESD) performances comparing with the conventional correlation functions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.9
• /
• pp.757-766
• /
• 2014

To compensate signal loss due to the channel blockage in satellite communication link, we propose a cooperative communication scheme for OTM(On-The-Move) terminal in next generation satellite communication systems. The proposed scheme configures cooperation subnet with adjacent OTM terminal with the help of ground communication equipment. Shared data is spread by orthogonal spreading code, then the spread sequences are transmitted simultaneously. The receiver combines the power of received signals by EGC(Equal gain combining). The OTM terminal blockage channel is modeled by 2-state Markov chain. We evaluate the bit error rate according to the blockage channel of the channel state for the performance analysis of the proposed scheme. As a result, the proposed scheme shows better BER performance than traditional scheme with the help of subset members. In particular, the proposed scheme shows superior performance as the channel block probability is higher. However, as the number of subset members is increasing, there is a constraint because of the higher multiple access interference.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.6A
• /
• pp.379-385
• /
• 2003

In this paper, we propose a time constant control method for sieving local minimum problem of the multiuser detector using Hopfield neural network for synchronous multi-rate code division multiple access(CDMA) system in selective fading environments and its performance is compared with that of the parallel interference cancellation(PIC). We also assume that short scrambling codes of 256 chip length are used an uplink, suggest a simple correlation estimation algorithm and circuit complexity reduction method by using cyclostationarity property of short scrambling code.It is verified that multiuser detector using Hopfield neural network more efficiently cancels multiple access interference(MAI) and obtain better bit error rate and near-far resistant than conventional detector.

• The KIPS Transactions:PartD
• /
• v.15D no.1
• /
• pp.99-106
• /
• 2008

Recently developed compilers perform some optimizations in order to speed up the execution time of source program. These optimizations require the reordering of the sequence of program statements. This reordering does not give any problems in a single-threaded program. However, the reordering gives some significant errors in a multi-threaded program. State-of-the-art model checkers such as JavaPathfinder do not consider the reordering resulted in the optimization step in a compiler since they just consider a single memory model. In this paper, we develop a new verification tool to verify Java source program based on Java Memory Model. And our tool is capable of handling the reordering in verifying Java programs. As a result, our tool finds an error in the test program which is not revealed with the traditional model checker JavaPathFinder.

• Journal of Advanced Navigation Technology
• /
• v.23 no.2
• /
• pp.186-193
• /
• 2019

This paper presents and implements a simple programmable PCM encoder structure uisng the commutation method. In the telemetry system, information is required to assign each data to the channel in order to generate a frame format the data acpuired from the sensor. In this case, when the number of state information is large or the data type is various, there is a necessity to input a large amount of information to each channel. However, the more the number of channels and data, the more probability the error will occur. Therefore, in this paper, the channel information is created using the program. And PCM encoder was implemented to store channel information in ROM. The proposed PCM encoder architecture reduces the likelihood of errors. And it can improve the development speed. The validity of proposed structure is proved by simulation.

• Geophysics and Geophysical Exploration
• /
• v.11 no.4
• /
• pp.361-367
• /
• 2008

When constructing a synthetic seismogram in the earthquake study or in seismic data interpretation by using a ray-tracing technique, the most troublesome and error-prone task is to define a suite of ray codes for the corresponding rays to trace in advance. An infinite number of rays exist for any arbitrarily located source and receiver in a medium. Missing certain important rays or an inappropriate selection of ray codes in tracing rays may result in wrong interpretation of the earthquake record or seismogram. Automatic ray code generation could be able to eliminate those problems. In this study we have developed an efficient algorithm with which one can generate systematically all the ray codes for the source(s) and receiver(s) arbitrarily located in a model. The result of this work could be used not only in analysing multiples in seismic data processing and interpretation, but also in coda wave study, study on the amplification effects in a basin and phase identification of the waves multiply reflected/refracted in earthquake study.

• The Journal of the Korea Contents Association
• /
• v.9 no.4
• /
• pp.131-141
• /
• 2009

An increasing variety of malware, such as worms, spyware and adware, threatens both personal and business computing. Remotely controlled bot networks of compromised systems are growing quickly. This paper proposes an intrusion detection system based outflow traffic analysis. Many research efforts and commercial products have focused on preventing intrusion by filtering known exploits or unknown ones exploiting known vulnerabilities. Complementary to these solutions, the proposed IDS can detect intrusion of unknown new mal ware before their signatures are widely distributed. The proposed IDS is consists of a outflow detector, user monitor, process monitor and network monitor. To infer user intent, the proposed IDS correlates outbound connections with user-driven input at the process level under the assumption that user intent is implied by user-driven input. As a complement to existing prevention system, proposed IDS decreases the danger of information leak and protects computers and networks from more severe damage.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.4 s.346
• /
• pp.31-38
• /
• 2006

In this paper, we propose an efficient preceding scheme for STBC-Spatial Muiltiplexing OFDM systems. In MIMO systems, the precoder is designed on the assumption that feedback channel information is perfectly known to transmitter and receiver. However, feedback delay and link errors in real environment make the transmitter use the incorrect channel information and consequently cause the performance degradation. The proposed precoder is designed to compensate for the performance degradation by the diversity gain provided by STBC. At the transmitter, the precoder for each subcarrier is constructed by using the index of codebook, subcarrier correlation, and auto correlation of channel. From the simulation results, STBC-spatial multiplexing OFDM outperforms the preceded-spatial multiplexing OFDM at $SER=10^{-3}$ when the Doppler frequency is greater than 60Hz.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.7
• /
• pp.2149-2160
• /
• 2000

Recently many efforts on the development of automatic processing system for delivery sequence sorting have been performed in ETRI, which requires the use of postal4-state bar code system to encode delivery points. The 4-state bar code called postal 4-state barcode for high speed processing that has been specifically designed for information processing of logistics and automatic processing of he mail items. The Information of 4-state bar code indicates mail data such as post code, delivery sequence number, error correction code worked, customer information, and a unique ID. This appear addresses the issue on he reduction of reading error in postal 4-state raster beam based bar code reader. The raster beam scanning features are the unequally distributed number of spots per each unit, which cause reading errors. We propose a method for reducing the bar code reading error by adjusting measured values of bar code width to its average value over each interval. The test results show that the above method reduces the average reading error rate approximately by 99.88%.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.8
• /
• pp.707-712
• /
• 2014

Aircraft fuel indicator is a device to indicate the amount of fuel remained during flight, where accurate and consistent operation of the indicator should be maintained. Previously the Korean Utility Helicopter fuel indicator sporadically displayed abnormal sign by "8888" during flight, jeopardizing flight safety. Inappropriate EMI/EMC performance was detected during trouble shooting process. The cause of the abnormal display was found to be resulted from unstable power induced by electro-magnetic disturbance and CAN communication error. The aircraft fuel indicator design was improved and the design compatibility was verified to avoid abnormal display.