• Journal of the Korean Society for Railway
• /
• v.12 no.6
• /
• pp.989-995
• /
• 2009

Short-time Fourier transforms (STFT) are useful for analyzing signals with harmonics that vary with time. If the variation of the harmonics with time is smooth, such as in kinematic vibrations in vehicles, then it is possible to improve the STFT using order spectra and correlation analysis. In this paper, it is shown how correlation analysis can be performed when the speed signal is noisy or unknown and then it is shown how order spectra become simple to compute after this analysis. The results are illustrated by an analysis of axle and car body vibrations in the prototype high-speed train, HSR-350x.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.5
• /
• pp.51-59
• /
• 2017

In this paper, we propose a gray code order of antenna index permutations for differential spatial modulation (DSM). To facilitate the implementation, the well-known Trotter-Johnson ranking and unranking algorithms are adopted, which result in similar computational complexity to the existing DSM that uses the lexicographic order. The signal-to-noise ratio gain achieved by the proposed gray code order over the lexicographic order is also analyzed and verified via simulations. Based on the gray coding framework, we further propose a diversity-enhancing scheme named intersected gray (I-gray) code order, where the permutations of active antenna indices are selected directly from the odd (or even) positions of the full permutations in the gray code order. From analysis and simulations, it is shown that the I-gray code order can harvest an additional transmit diversity order with respect to the gray code order.

• Journal of the Korea Society for Simulation
• /
• v.20 no.2
• /
• pp.67-76
• /
• 2011

Order picking in automotive service parts warehouses is considered to be the most labor-intensive operation. Such warehouses contain hundreds of thousands of items, but normally 20% of products contribute to about 80% of turnover according to Pareto's 80-20 principle. Therefore most fast moving items are located near an outbound area which is called the "Golden Zone". Order picking routing efficiency is related to productivity and labor cost. However, most companies use simple methods. In this paper, we describe a series of computational experiments over a set of test cases where, we compared various previously existing routing heuristics to an optimal algorithm. We focus on examining the influence of the golden zone on the performance and selection of routing methods. The results obtained show that the optimal routing method increases the productivity at least 17.2%, and all the routing methods have better performance as the pick up rate from the golden zone increases.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.8
• /
• pp.1679-1686
• /
• 2009

Odor sensing system that is electronic nose device and its signal processing technique has potential to become a critical service for the people who require tangibility of sense of smell in the multimedia communication. PCA(Principal Component Analysis) have been used for dimensionality reduction and visualization of multivariate measurement data. PCA is good for estimating importance value by variance of data but, have some limitation for getting meaningful representation from odor sensing system. This paper explain about how to analyze the data of odor sensing system by ICA(Independent Component Analysis). We show that ICA can give better result like sensor drift analysis, dimensionality reduction and data representation by improved discrimination.

• Information Systems Review
• /
• v.24 no.2
• /
• pp.41-66
• /
• 2022

With the development of IT, mobile apps and the expansion of contactless services due to COVID-19, "smart orders" have recently been activated in the food and beverage service. Even in recent years, when sales have declined, the number of orders made by smart orders has been steadily increasing, and this ordering method can accumulate customer data, enabling effective customized services in the future. In the present study, satisfaction with smart orders and continuous use intention were studied based on the technology acceptance model (TAM). And it focused on whether there is a difference in personality when using smart orders. For this purpose, a survey was conducted on 317 smart order users, and the hypothesis was verified by structural equation model analysis. Perceived benefits had a significant effect on satisfaction; also, satisfaction had a significant effect on continuous use intention. There is a significant disparity between introvert and extrovert type. As a consequence, the introverted type has a greater intention to perceive usefulness of smart orders and continuously use them. These results suggest that the customer's personality type should be considered in future customer customization strategies.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1992.10a
• /
• pp.4-4
• /
• 1992

본 프로젝트는 수주 오더에 대한 납기 예측과 가공사 Delivery 체계의 전반적 향상을 목적으로 하며, 이에 따른 목표로는 로트 편성의 자동화, 월간, 주간 및 일간 단위의 생산 스케쥴 자동 작성, 원자재 소요량과 재공 및 재고 예측, 설비 부하 분석, 생산 사이클 타임 분석 및 단축이다. 상기의 목표 달성을 위한 가공사 Delivery Scheduling 시스템은 계획용 로트 편성 모델, 실행용 로트 편성 모델, 그리고 가공사 생산 스케쥴 작성을 위한 Simulation 모델로 구성된다. 계획용 로트 편성 모델은 현행의 로트 편성 기준에 따라 미가공 생산의뢰서 전체 물량을 대상으로 로트를 편성하여 이 로트를 염색기에 할당하는 모델이며, 실행용 로트 편성 모델에서는 일일 원사재고, 염색기 고장 등과 같은 실제 조업여건을 고려하여, 작업지시서 발행이 가능한 생산의뢰서 물량에 대하여만 로트 편성을 행한다. 가공사 생산 스케쥴 작성을 위한 Simulation 모델은 계획용 혹은 실행용 로트 편성 모델로부터 얻어지는 로트 편성 결과 또는 로트 번호가 부여된 최종 로트 편성 결과 (재공 로트 포함)를 입력으로 하여 이들 로트가 가공사 생산공정에서 처리되는 상세한 조업을 모의 생산하는 모델이다. 본 시스템은 영업부 및 기획부와 가공부의 사용 목적에 따라 크게 두가지로 사용될 수 있다. 영업부 및 기획부에서는 계획용 로트 편성 모델과 Simulation 모델을 사용하여 수주 오더에 대한 납기 예측 및 원사 수급 계획의 작성에 의사결정 지원을 받을 수 있으며, 가공부에서는 실행용 로트 편성 모델 및 Simulation 모델을 사용하여 상세 가공사 생산 스케쥴의 작성 및 긴급 오더의 처리 등에 관한 의사결정 지원을 받을 수 있다. 본 프로젝트를 통한 효과로는 정확한 생산 스케쥴의 자동 작성 및 스케쥴 작성시간 단축, 납기 예측 및 납기 준수율 향상, 실적관리 향상, 그리고 설비 가동율 분석, 현장관리 등을 위한 기타 유용한 정보제공 등이다.

• Cartoon and Animation Studies
• /
• s.41
• /
• pp.253-277
• /
• 2015

When was launched in 2014, it was immediately ranked 2nd in English gross sales record in the first half of 2014, attracting huge attention from avid game users. Colin Moriarty(2014) states that the worldwide popular game, , lies on the alternative history assumption, 'what if Nazi Germany won the second world war? In regard to this, this research addresses how the characteristics of alternative history was adopted and visually represented in FPS game trailer. In terms of research method, firstly, literatures will be reviewed about definition of alternative history and some of the previous examples where alternative history was applied in novels, films and games. Secondly, narrative composition of alternative history is categorized as three sequential phases, (1) borrowing real history material, (2) connection between real and fictional history and (3) reconstruction of history through reinterpretation. Thirdly, the live-action game trailer will be analysed by three sequential phases of narrative composition, and CG game character and background will be analysed by spatial background, characters and props. The phase of 'borrowing' has used the historic images related to the World War II, and the phase of "connection' has composited by "connection through circumstantial events". The phase of 'reconstruction' has unfolded its fictional narrative in the form of "limited fictional history" In addition to this, has constructed dystopia world through composing of historic images and CG characters by SF design. In the light of this, the narrative composition of alternative history successfully extends to game area.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11b
• /
• pp.154-156
• /
• 2005

인터넷의 발전은 다양한 데이터의 폭발적인 증가를 가져왔다. 유연하고 효과적인 데이터 표현 능력을 지닌 XML이 인터넷 환경에서 데이터 표현 및 교환 수단으로 여러 분야에서 표준으로 활용되고 있다. 그래서 대용량 XML 문서의 저장 및 관리에 대한 연구의 필요성이 증가하였다. 현재 다양한 XML 저장 기법과 XQuery를 이용한 XML 질의 처리에 대한 연구가 활발히 진행되고 있다. 본 논문에서는 객체 관계 데이터베이스 시스템을 이용하여 대용량 XML 문서 처리에 적합하도록 XML 저장 시스템을 설계 및 구현하였다. 또한 하이브리드 오더 인코딩 기법을 이용하여 저장된 XML 문서의 갱신 성능과 XML 질의 처리 성능을 개선하였다. 그리고 XBench를 이용하여 생성한 대용량 XML 문서로 XML 저장 시스템의 성능을 평가하고 분석하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.1312-1312
• /
• 2006

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.10a
• /
• pp.327-328
• /
• 2013