Proceedings of the Korean Institute of Navigation and Port Research Conference
/
2011.06a
/
pp.346-348
/
2011
해상에서 예부선이 항행시 부선의 선회운동으로 인하여 예부선의 안전운항에 많은 어려움을 겪고 있다. 본 연구에서는 안전한 예항업무를 위하여 실무에서 많이 사용되고 있는 2가지 부선 모델을 대상으로 skeg의 설치 유무 및 skeg의 설치 위치에 의한 부선의 선회운동과 이에 따른 예인장력을 알아보기 위해 정수중에서의 수조실험을 실행하였다. 실험결과 예인삭의 선회각도는 skeg을 설치하지 않았을 때 가장 크게 나타났고, center skeg을 설치했을 때부터 작아지기 시작하여 side skeg을 설치했을 때 예인삭의 선회각도가 급격히 작아지는 것으로 파악되었으며, 이러한 특성은 선수형상에 따라 조금씩 다르게 나타나고 있음을 확인하였다. 또한 예인삭의 선회각도가 커질수록 예인장력이 커지는 것을 알 수 있었다. 따라서 부선에 skeg을 설치하여 운항하는 것이 부선의 선회 운동을 감소시켜 최종적으로 예인장력이 작아지게 하여 안전예항업무에 도움이 될 것으로 판단된다.
Proceedings of the Korean Institute of Navigation and Port Research Conference
/
2014.06a
/
pp.17-19
/
2014
해양사고 발생 직후 2차적인 피해로의 확산을 방지하기 위한 조치로 사고선박을 안전한 장소로 이동하게 된다. 사고선박의 크기와 상태 그리고 해상조건을 고려하여 예선의 크기와 척수가 결정된다. 이 과정에서 사고선박의 선체저항을 계산하게 되는데, 기존의 이론식을 적용하여 계산하고 이에 대한 검증 단계로 예인실험을 실시하였다. 대상선박은 목포해양대학교 실습선 새유달호이며, 장력계, 외력 측정장치 등 실험장치는 실습선에 탑재하여 계측하였다. 실험장소는 목포해양대학교 인근 묘박지이며, 당시 풍속은 7m/s, 조류는 0.7m/s 전후이었으며, 횡방향 예인, 전방 2척 예인, 전 후방예인, 프로펠러고착, 예인속력의 변화 등 다양한 시나리오에 대하여 실험을 실시하였다. 장력의 계측은 예선의 예인삭을 사용하였으며, 실습선 선수미 비트에 장력계를 연결하여 측정하였고, 장력계의 최대측정 범위는 20톤을 사용하였다. 예인속력은 정지에서 3m/s까지 단계적으로 증가시키면서 해당 속력별 장력을 계측하여 속력증가에 따른 예인력을 확인하였다. 최종적으로 이론계산 결과와 실선실험 결과를 상호 비교하여 이론계산식의 유효성을 검증하였다.
Proceedings of the Korean Institute of Navigation and Port Research Conference
/
2013.06a
/
pp.155-157
/
2013
예인시스템의 설계는 예인준비 과정에서 취해질 단계적 지침과 예인선을 선택하고 예인속력을 예측하는 것을 포함한다. 예인시스템을 설계할 때에는 외력환경의 변화 가능성과 예상치 못한 상황을 고려하여 예인선 및 예인설비를 선택하기 때문에 예인색장력 계산, 예인선 및 예인장비의 선정, 그리고 확인 및 수정단계와 같은 주요 3가지 단계를 반복 계산하는 과정이 요구되고, 이를 통하여 최적의 예인시스템을 설계하게 된다. 예인을 계획하고 시스템을 설계할 때 고려할 사항은 예인의 크기 및 조건, 요구되는 예인속력, 사용가능한 예인선의 용량과 예인색 사양, 예인저항에 의한 예인색 장력과 동적하중, 예인색 현수부를 감안한 수심과 예인색길이, 그리고 예인선의 복원성 등을 고려하여야 한다. 이러한 요소들은 상호 연관성이 있으며, 예인속력은 날씨 또는 예인조건에 따라 제한될 수 있다. 그리고 예인시스템은 최상의 배치가 이루어졌는지 확인하기 위해 전체적으로도 점검되어져야 한다.
Proceedings of the Korean Institute of Navigation and Port Research Conference
/
2013.06a
/
pp.180-181
/
2013
해상에서 사고 선박을 신속하게 예인하는 것은 현장에서 일어날 수 있는 2차적인 피해를 사전에 예방할 수 있는 중요한 조치이다. 이를 위해서는 예인선을 이용하여 사고선박을 이동시켜야 하고 예인선과 피 예인 선박은 예인삭에 의해 연결되게 된다. 자력운항이 불가능한 상태에서 피 예인 선박은 예인선의 예인력에 의해 거동이 좌우되고 예인력은 해상환경 및 피예인 선박의 저항력을 고려하여 결정되어야 한다. 본 연구에서는 피 예인 선박 예인 시 예인저항과 이로 인해 예인삭에 걸리는 장력해석법에 대해 검토한다. 본 연구를 통해 얻어진 결과는 사고선박 예인지원시스템에 효율적으로 활용 가능할 것이다.
In this paper, calculation methods of resistance of the ship to be towed and towline tension are discussed. When the vessel is fallen into dead ship condition then appropriate towing force have to be estimated to move the vessel from accident place to safe area. In this research, resistance of the ship to be towed and the tow hawser were considered to estimate total towline tension. Polynomial interpolation method is also applied to estimate additional hydrodynamic resistance of towline. Finally, UI program to calculate the resistance and total towline tension is developed. The developed program based on the research results is effective and convenient to use.
The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
/
v.8
no.2
/
pp.203-209
/
2003
In this study, the configuration and tension of a towing cable for side-scan sonar are predicted in an ambient flow and at an unsteady towing condition. The governing equation of three-dimensional dynamic analysis for a flexible cable is solved using a finite difference method. We successfully predict the configuration and tension of a side-scan sonar and designed the towing system. It is found in static analyses that the side-scan sonar must be towed to keep a its stable depth at a reasonable speed. The study also reveals in the transient analyses that the dominant component affecting the top tension is the tangential drag force for the larger towing speed than the critical speed, and the soft weight of a towed instrument for the smaller towing speed than. It should be maneuvered for a towing vessel with good consideration for the impact effect in a cable due to tension peak when a towing speed is suddenly increase. The developed program can be applicable for three-dimensional dynamic analysis of a towing system for various marine survey instruments.
Kim, Jong-Hyeok;Seo, Jeonghwa;Kim, Han-Gyeol;Kim, Changhee;Yoo, Geuksang;Rhee, Shin Hyung;Park, Chang-wook
Journal of the Korean Society for Marine Environment & Energy
/
v.19
no.4
/
pp.259-265
/
2016
The present study aims to design and utilize a model test system of a Caisson in wet towing condition, to assess towing stability of a 9,300 ton class caisson. The suggested towing system was designed to provide regular tension on the towline, whereas the previous model test system towed the model in constant speed. The new model test system was expected to reproduce the towing condition more realistically than the test system with constant speed condition, as the tugboat in actual towing condition tows the towline with constant power. Model tests were conducted in a towing tank with 1/30 scaled model. In the model tests, six-degrees-of-freedom motion of the caisson model and tension on the towline were measured and analyzed. By using the new system, fluctuation of the motion of model and tension on the towline decreased. The variation in the draft and initial trim was applied in the model tests. In the initial trim condition, the motion and towing force decreased.
Proceedings of the Korean Institute of Navigation and Port Research Conference
/
2012.10a
/
pp.29-31
/
2012
사고선박을 예선(또는 예인선)을 이용하여 안전한 곳으로 이동시키기 위해서는 예인소요마력을 계산하여 예선의 척수를 결정해야 한다. 예선의 신속한 투입은 잠재적인 환경오염 및 사고선박의 2차적인 피해로의 확산을 예방할 수 있다. 하지만, 국내에는 아직까지 사고선박의 형태, 크기, 외력조건에 따라 지원되어야 할 예선의 척수 산정 및 최적의 배치방법에 대한 정량적이고 체계적인 결정 시스템이 없는 실정이다. 따라서 본 연구에서는 실선을 활용한 소요마력 측정을 위한 실험방법의 제시와 상황에 따른 예선의 다양한 배치에 따른 장력 측정 방법을 제시하고, 이러한 실험을 통하여 얻은 결과를 이론계산 결과와 비교 분석함으로써 추후 구축하게 될 사고선박 예인지원시스템 프로그램 개발을 위한 이론식을 정립하고자 한다.
Proceedings of the Korean Institute of Navigation and Port Research Conference
/
2011.11a
/
pp.37-39
/
2011
예선이 부선을 예인줄로 연결하여 운항할 시 예인줄에 걸리는 장력 및 형상을 예인줄을 다물체로 분할하여 모델링하였다. 이러한 예인줄 요소에 대한 횡동요를 제외한 5자유도 운동방정식을 구성하고, 각 요소들에 작용하는 힘을 정식화하여 연성 운동방정식을 도출하였다. 예인줄 요소들 간에는 예인줄의 재료 특성에 따른 강성을 가진 스프링과 감쇠장치로 연결하여 동력학적 조건을 부가하였고, 요소의 변형을 허용하는 형태로 운동학적 조건은 설정하지 않았다. 예인줄의 다물체 모델링의 검증을 위하여 단순 낙하, 직진, 사인파 형태로 지그재그로 움직이는 예선과 단순 항력체로 가정한 부선의 운동에 대한 시뮬레이션을 수행하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.