• 한국산학기술학회논문지
• /
• 제12권5호
• /
• pp.2025-2030
• /
• 2011

최근에 많은 완성차 업계에서 차량 중량을 줄이기 위해 알루미늄 재질의 도어 임팩트빔을 사용하고 있으나, 이는 옆문강도 및 측면충돌 성능을 저하시킬 수 있다. 따라서 이 논문에서는 옆문강도 법규를 만족시키고 스틸 도어 빔 수준의 측면충돌 성능을 유지할 수 있는 알루미늄 빔의 최적화된 단면 형상과 설계수치를 제시하고자 한다.

• 한국자동차공학회논문집
• /
• 제10권3호
• /
• pp.176-184
• /
• 2002

The door stiffness is one of the important factors for the side impact. Generally, the researches have been conducted on the assembled door. A side impact door beam is installed in a door to protect occupants from the side impact. This research is only concentrated on the side impact beam and a side impact beam is designed. The cross section is defined to have an elliptic shape. An optimization problem is defined to find the design maximizing the intrusion stiffness within the specified weight. Design variables are the radii and the thickness of the ellipsoid. The analysis of the side impact is carried out by the nonlinear finite element method. The optimization problem is solved by two methods. One is the experimental design scheme using an orthogonal array. The other is the gradient-based optimization using the response surface method(RSM). Both methods have obtained the better designs than the current one.

• 대한기계학회논문집A
• /
• 제29권2호
• /
• pp.201-213
• /
• 2005

The automotive door has a large finite element model in analysis and many design requirements such as stiffness, natural frequency, side intrusion, etc. Thus, various related governing equations should be solved for systematic analysis and design. Because each governing equation has different characteristics, it is almost impossible to solve them simultaneously. Instead, they are separately handled and the analysis results are incorporated into the design separately. Currently, the design is usually conducted by trials and errors with engineering intuition in design practice. In this research, MDO methods are proposed to solve the problems that share design variables in disciplines. The idea is from the Gauss-Seidel type method for multi-discipline analysis. The developed methods show stable convergence and the weight of the door is reduced by fifteen percent.

• 한국생산제조학회지
• /
• 제21권1호
• /
• pp.21-25
• /
• 2012

In this study, the safest model can be selected by the simulation result of structural safety analysis according to the shape of impact bar affected at side door of automobile. The open sectional model of semicircle type has the lowest deformation and stress among 4 kinds of models. As the weight of this model has 30% in comparison with other models, it becomes most economical and stable. As the open sectional model of cap type the highest deformation and stress among 4 kinds of models, it becomes weakest. The closed models with circular and rectangular types has the stress far lower than cap type. The maximum deformation is shown at the center part of impact bar but the maximum stress occurs at the joint part between impact bar and frame.

• 한국융합학회논문지
• /
• 제11권4호
• /
• pp.173-177
• /
• 2020

본 연구에서는 현재 전복 사고가 자주 발생하는 Model A와 Model B의 중형 세단 차량들의 사이드 도어들을 구조 해석으로 서로 비교한다. 구조해석 결과, 두 모델 모두 전복 사고나 충격 시 하중이 작용되는 부분에서 최대 변형이 일어났고 2개의 모델 중 Model A가 Model B와 비교하면 충격력을 더 견딜 수 있다. 또한 도어의 모서리 부분에서 최대 응력이 일어났고 Model B가 Model A보다 2.5 배 더 응력이 커진다. 충돌 사고가 일어날 시, 2개의 모델 중 그 최대 응력이 작은 Model A가 Model B와 비교하면 더 큰 충격력을 견딜 수 있다. Model B가 Model A보다 더 큰 변형량을 갖는 것으로 보아 측면 충돌 사고에서는 Model A보다 위험할 것으로 사료된다. 차종별 차량 옆문의 충돌해석을 적용함으로서 본 논문에서의 연구 결과는 미적인 설계를 적용할 수 있는 융합 연구자료로서 유리하다고 여겨진다.