Transactions of the Korean Society of Automotive Engineers (한국자동차공학회논문집)

The Korean Society of Automotive Engineers (한국자동차공학회)
권호 표지

Optimization of the Automotive Side Door Impact Beam Considering Static Requirement

정적충돌성능을 고려한 자동차 옆문 충격빔의 최적설계

  • Published : 2002.05.01
Download PDF
⟨ Previous Next ⟩

Abstract

The door stiffness is one of the important factors for the side impact. Generally, the researches have been conducted on the assembled door. A side impact door beam is installed in a door to protect occupants from the side impact. This research is only concentrated on the side impact beam and a side impact beam is designed. The cross section is defined to have an elliptic shape. An optimization problem is defined to find the design maximizing the intrusion stiffness within the specified weight. Design variables are the radii and the thickness of the ellipsoid. The analysis of the side impact is carried out by the nonlinear finite element method. The optimization problem is solved by two methods. One is the experimental design scheme using an orthogonal array. The other is the gradient-based optimization using the response surface method(RSM). Both methods have obtained the better designs than the current one.

Keywords

References

  1. 최형연, 신재호, 박현호, '유한요소법을 이용한 도어 패딩과 Intrusion Bar의 설계 해석, ' 한국자동차공학회 추계학술대회논문집, pp.449-455, 1995
  2. 김헌영, 강신유, '자동차 프론트 도어의 측면 충격 해석,' 자동차공학회지, 제 19 권 제 2 호, pp.1-9, 1997
  3. 한길영, 이동기, '자동차 사이드 도어용 인트루전 비임 개발을위한케블라섬유강화복합재료의 기계적 특성에 관한 연구, ” 한국해양공학회지, 제 14 권 제 2 호, pp.89-98, 2000
  4. J. S. Arora, Introduction to Optimum Design, McGraw-Hill Book Company, New York, 1989
  5. G. N.,Vanderplaats, Numerical Optimization Techniques for Engineering Design, McGraw-Hill Book Company, New York, 1984
  6. Fmvss Standard No.214 Side Impact Protection, National Highway Traffic Safety Administration
  7. 자동차안전기준시행세칙, 개정 1.28 건설교통부고시 제1997-17호, 1997
  8. LS-DYNA Theoretical Manual, Livermore Software Technology, CO., 1999
  9. Klaus-Jurgen Bathe, Finite Element Procedures, Prentice-Hall, Inc. A Simon and Schuster Company Englewood Cliffs, New Jersey 07632, 1996
  10. N. S. Phadke, Quality Engineering Using Robust Design, Prentice Hall, New Jersey, 1989
  11. 박성현, 현대실험 계획법, 민영사, 1990
  12. 이권희, 박경진, '제한조건이 있는 문제의 이산설계공간에서의 강건최적설계,' 대한기계학회논문집 A권, 제22권 제5호, pp.728-737, 1998
  13. MINTab Minitab help: Release 12, Minitab, Inc., 1997
  14. VisualDOC Manual 1.0, Vanderplaats Research & Development, Inc., 1767 S. 8th Street, Suit M-210, Colorado Springs, CO., 1998
  15. Y. S. Park. S. H. Lee, G. J. Park, 'A Study Of Direct vs. Approximation Methods in Structural Optimization,' Structural Optimization, Vol.10, No.1, pp.64-66, 1994 https://doi.org/10.1007/BF01743697