• The Transactions of the Korea Information Processing Society
• /
• v.7 no.2
• /
• pp.477-487
• /
• 2000

When volume data is visualized by the ray casting method, the color value of each pixel in the image is obtained by composing the color contributions of the sample points that lie on the ray cast from the pixel point. In most ray tracing methods including Levoy's classical method, the color composition is formulated as a summation of the color contributions of the discrete sample points. However, the more precise color composition is formulated as differential equations over the color contributions of the continuous sample points. The discrete formulation is used, because analytical solutions to the continuous formulations are hard to find. In this paper, however, we have discovered a semi-analytical solution to the continuous formulation of a typical ray tracing of volume data. We have applied both Levoy's method and ours to the same set of data, and compared the visual quality of both results. The comparison shows that our method produces a more fine-grained visualization of volume data.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.303-306
• /
• 2001

Using THz time-domain spectroscopy (THz-TDS), the power absorption and the real conductivity of silica sand are measured terahertz frequency range. It is impossible to measure the characterization of the silica sand by simple electrical measurements using mechanical contacts, e.g., Hail effect or four-point probe measurements. However, the THz-TDS technique can measure not only electrical but also optical characterization of the sample. Also this technique can measure frequency dependent results. Especially, the real conductivity was increased according to THz frequency this is unusual material compare with metal and semiconductor materials; the measured real conductivity are not followed by the simple Drude theory.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.04a
• /
• pp.246-251
• /
• 1995

유연구조물의 진동제어를 위해 압전필름 작동기를 사용하였고 이와 연계하 여 샘플링 과정을 고려한 DSMC를 구성하였다. 변수변화 및 외란의 경계치 를 알고 있다는 가정하에 시스템을 이산화시킨 후 제어기를 설계하였다. 일 반적으로 연속시간 시스템의 이산화 과정에서 정합조건의 가정이 보장되지 않기 때문에 제어기 설계시 이를 배제하였다. 이산시간 리아푸노프 이론을 근거로 DSMC의 존재성을 도출하였고, 이것에 기초하여 슬라이딩 모드가 발생되도록 불연속제어기를 설계하였다. 이때, 불연속게인을 상수로 하지 않고 RP의 위치에 따라 계속 새롭게 수정함으로써 슬라이딩 영역을 최소화 하였다. 그리고 기존의 DSMC 기법상에서 발생되는 슬라이딩 영역의 문제를 .betha. 등가제어기를 이용하는 이원화 방법으로 극복하였으며, 컴퓨터 시뮬 레이션을 통하여 제안된 기법의 설계 효율성 및 제어기의 강건성을 입증하였다. 향후, 제안된 기법에 대한 실험적 고찰 및 중요 제어인자에 대한 연구가 계속적으로 수행될 예정이다.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.907-910
• /
• 1999

본 논문에서는 고 농도로 불순물이 주입된 영역에서 전자 및 정공 농도를 정교하게 구현하기 위해 Fermi-Dirac 분포함수를 고려한 포아송 방정식의 이산화 방법을 제안하였다. Fermi-Dirac 분포를 근사시키기 위해서 Least-Squares 및 점근선 근사법을 사용하였으며 Galerkin 방법을 근간으로 한 유한 요소법을 이용하여 포아송 방정식을 이산화하였다. 구현한 모델을 검증하기 위해 전력 BJT 시료를 제작하여 자체 개발된 소자 시뮬레이터인 BANDIS를 이용하여 모의 실험을 수행한 결과, 상업용 2차원 소자 시뮬레이터인 MEDICI에 비해 최대 4%이내의 상대 오차를 보였다.

• Korean Journal of Remote Sensing
• /
• v.30 no.6
• /
• pp.703-708
• /
• 2014

$NO_2$ vertical profiles were retrieved via ground based MAX-DOAS measurements for the summer period in 2006 in Beijing, one of the megacities in the Northeast Asia. Large portion of $NO_2$ load was observed at the 0-1 km layer. We found that $NO_2$ rapidly decreases up to the altitude of 3 km. In addition, the retrieved $NO_2$ mixing ratios within 0-1 km layer were compared with those observed at the surface by in-situ monitor. The correlation coefficient (R) between $NO_2$mixing ratios within 0-1 km layer and those at the surface was calculated to be 0.7. The major causes of such discrepancy are thought to be both differences in measured areas and rapid decrease in $NO_2$ mixing ratio with height.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.2
• /
• pp.315-327
• /
• 2002

The main objective of this study is to develop an discrete optimization algorithm of plane steel frames with rigid using second-order-elastic-plastic hinge analysis which is considering panel zone. Conventional analyses of steel frame are usually tarried out without considering the effect of panel zone deformation on frame behavior The validity of this model is established by comparison without panel zone on joint models is analyzed numerically to demonstrate the importance of using realistic models in steel frame analysis. The objective function is taken as Weight of steel frames and the constraints we formulated based on AISC-LRFD(1994). The validity of the developed algorithm we demonstrate by comparing the result with those of SAP2000. The result of the study indicates that the optimal design algorithm considering of panel zone behavior more economic design than simple steel frame design methods.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2000.11a
• /
• pp.105-109
• /
• 2000

종래의 핵연료소결체가 혼합산화물 혹은 이산화우라늄중 한가지 핵연료만으로 구성한 것과 달리 내부를 저농축 이산화우라늄 핵연료로 채우고 그 외부를 링형태의 혼합산화물 핵연료로 둘러 싼 이중구조를 특징으로 한다. 이러한 형태의 핵연료소결체는 중심영역의 핵분열반응률 줄임으로써 핵분열 기체생성, 핵연료봉 중심온도와 평균온도를 낮추어 준다. 이는 핵분열 기체방출을 낮추어 혼합산화물 핵연료봉 성능을 향상시키고 방출 연소도를 증가시키는 효과가 있다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.4 no.2 s.8
• /
• pp.173-180
• /
• 1996

In a grid based data transformation, the different gridding methods provide different interpretations of scattered data because each method calculate grid node values using a different weighted mathematical algorithms. Therefore, it is necessary to review the interpolated characteristics of some gridding methods according to search distance, search area and search options before determing the best method with a data set. For this, in this paper, six different gridding methods with the same search conditions are applied to a scattered data obtained from sterro-plotter. The interpolated characteristics of the scattered geographic data considered through comparison of coincidence between the data point and the grid node being interpolated. And also, shows the real application of gridding methods through calculating volumes and creating cross sections.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.3
• /
• pp.231-238
• /
• 2004

This paper presents the high speed noise reduction processing system using the modified discrete fourier transform(MDFT) on the frequency domain. The proposed filter uses the linear prediction coefficients of the adaptive line enhance(ALE) method based on the Sign algorithm The signals with a random noise tracking performance are examined through computer simulations. It is confirmed that the fast adaptive digital filter is realized by the high speed adaptive noise reduction(HANR) algorithm with rapid convergence on the frequency domain(FD).

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.9
• /
• pp.56-65
• /
• 2005

A dynamic analysis method that freezes a time domain by discretization and solves the spatial propagation equation has a unique feature that provides a degree of freedom on spatial domain compared with the space discretization or space-time discretization finite element method. Using this feature, the time finite element analysis can be effectively applied to optimize the spatial characteristics of distributed type actuators. In this research, the time domain finite element method was used to discretize the model. A state variable vector was used in the discretization to include arbitrary initial conditions. A performance index was proposed on spatial domain to consider both potential and vibrational energy, so that the resulting shape of the distributed actuator was optimized for dynamic control of the structure. It is assumed that the structure satisfies the final rest condition using the realizable control scheme although the initial disturbance can affect the system response. Both equations on states and costates were derived based on the selected performance index and structural model. Ricatti matrix differential equations on state and costate variables were derived by the reconfiguration of the sub-matrices and application of time/space boundary conditions, and finally optimal actuator distribution was obtained. Numerical simulation results validated the proposed actuator shape optimization scheme.