• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.11
• /
• pp.1010-1018
• /
• 2013

The dual-stream based stereoscopic 3D broadcasting standard was developed in 2011. EBS broadcasted 3DTV experimental service according to this standard in April 2012. Dual-stream based 3DTV broadcasting is service-compatible and backward-compatible, so viewers who have legacy 2D HDTV can watch the broadcasting content as 2D. And 3DTV viewers can select watching 2D or 3D. Since 3D content production is not usual yet for terrestrial broadcasters, only some particular programs in specific periods will be broadcasted as 3D at the initiatory stage. For it, stable viewing condition is strongly required for both 2D viewers and 3D viewers. This paper suggests broadcasting transmission system structure and effective switching scheme for stable 2D and 3D viewing conditions in the case of dual-stream based terrestrial 3DTV broadcasting.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.9
• /
• pp.707-721
• /
• 2018

In this paper, a small synthetic aperture radar(SAR) system with 30 cm resolution is proposed, and a RAW data-based Doppler parameter estimation and motion compensation algorithm is described in detail. Acquisition of both PolSAR and InSAR data are enabled because there are two channels each in the transmitter and receiver modules. Automotive-based field work is performed to obtain PolSAR data, and signal processing results are ultimately obtained. A motion compensation algorithm is used to mitigate the residual phase error due to platform oscillation, and improved performance is obtained with the motion compensation algorithm using the automotive field test data.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.3
• /
• pp.249-257
• /
• 2013

This study newly presents a synthetic phase tuning technique to suppress the unwanted torsional mode while enhancing the desired torsional mode in a pipe. Specifically, we aim at the enhancement of the first torsional mode and the suppression of the undesired, second torsional mode. Earlier efforts were to enhance the desired wave mode only in the hope that the enhancement results in the suppression of the unwanted wave mode. Unlike these efforts, the suggested technique makes the complete cancellation of the unwanted wave mode but it is shown to enhance the desired first mode for torsional wave problems. In the present study, the synthetic phase tuning is developed for the cancellation of the unwanted wave mode, meaning that the number of necessary experimental equipments is reduced. Simulation and experiment were carried out to check the effectiveness of the proposed method. As an application of the suggested technique, we investigated the reflection and mode conversion characteristics of the first torsional mode according to the step thickness variation in a stepped pipe.

• Journal of the Korea Convergence Society
• /
• v.11 no.9
• /
• pp.15-20
• /
• 2020

Software-related training can be considered essential in situations where software is an important factor in national innovation, growth and value creation. As one of the implementation methods for engineering education, various education through virtual simulations that can educate difficult situations in a similar environment are being conducted. Recently, the construction of smart factories at production and manufacturing sites is spreading, and product inspections using vision systems are being conducted. However, it has many difficulties due to lack of operation technology of vision system, but it requires a lot of cost to construct the system for education of vision system. In this paper, provide an educational virtual simulation model that integrates computer and physics engine camera functions and can extract and transmit video. It is possible to generate an image of 30Hz or more at an average of 35.4FPS of the experimental results of the proposed model, and it is possible to send and receive images in a time of 22.7ms, which can be utilized in an educational virtual simulation educational environment.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.6
• /
• pp.535-544
• /
• 2017

In this paper, to overcome the limitation of information transmission and reception according to the RF system of UAV, it is necessary to check the position of many UAVs in flight on the basis of mobile communication and to make the LTE modem lightweight and low power And UAVs that are in operation are received and controlled. Through this study, we proposed a method to control real-time location tracking by connecting high-resolution images to the network anytime and anywhere. For this purpose, we propose the requirements and requirements of LTE modem using real-time high-speed data communication technology (3G, 4G LTE, Bluetooth) by presenting the communication module system of LTE-based UAV. N:N control system concept and implementation technology(Control system structure, control data flow chart, flight planning and transmission, real-time location tracking).

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.1
• /
• pp.114-119
• /
• 2019

The transmitted acoustic signals are severely influenced by multiply reflected signals from boundaries, such as sea surface and bottom in the shallow water. Very large reflection signals from boundaries cause inter-symbol interference so that the performance of the underwater acoustic communication is degraded. Usually, the waveform shaping filters are used to prevent the reflected signals under this kind of acoustic channel. Especially, the raised cosine filter is widely used, which can also be used to restrict the bandwidth of the transmitted signal. In this study, we evaluate the raised cosine filter for image data transmission in the shallow water, and propose a new modified raised cosine filter. The QPSK (Quadrature Phase Shift Keying) system is used for the underwater acoustic communication simulations with different distances and symbol rates. As a result, the bit error rate was reduced from the minimum 1.0 % to the maximum 32 %.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.449-449
• /
• 2023

유량은 도섭법, 보트법, 횡측선법, 교량법 및 부자법 등 다양한 방법으로 측정되는데, 이들 측정방법 모두 많은 수의 관측자를 필요로 한다. 이들은 하천에 직접 들어가서 측정하거나, 인공구조물인 교량과 재방에서 측정되는데, 도섭법, 보트법, 횡측선법이 전자이며, 고수위 및 고유속으로 하천에 들어가지 못하는 경우에는 교량법 및 부자법을 사용하여 유량을 측정한다. 최근 지구 온난화로 따른 이상 기후가 빈번히 발생하고 있으며, 이로 인한 많은 피해가 발생하고 있어, 하천 수위, 유속 모니터링에 대한 중요성이 더 커지고 있다. 2022년 1월부터 시행 중인 「중대재해처벌법」으로 집중호우 및 일몰 이후에는 안전상의 문제로 유량측정이 어려운 상황으로 필요한 시기에 유량 데이터를 확보에 제약이 있다. 이에 관측자 없이도 유량을 측정할 수 있는 방법을 이용하여 중대 재해의 위험성을 해소하고자 하였다. 유량측정 방법으로 설치 회수가 용이한 비접촉 방식에서 영상표면유속측정 방식과 레이더(전자파)표면 유속측정 방식 중, 집중호우 및 태풍 발생 중 가시성이 확보되지 않아도 측정이 가능한 레이더(전자파) 표면유속계를 이용한 다측점 유량측정 방법을 개발하였다. 비접촉 다측점 유량측정시스템 Master 1대에 8대의 Slave를 연결할 수 있어 총 9개의 측선을 측정할 수 있게 개발하였다. 특히, 하천 및 수로 등의 표면 유속을 비접촉으로 측정하고 하천 단면을 이용하여 유량측정이 가능한 장비로 별도의 수중 및 수상 주조물 작업이 필요 없고 장비의 손상 및 유실 가능성이 거의 없고 역류 상태에서도 측정이 가능하다. 유속은 24GHz의 레이더 주파수를 송수신하여 도플러 변이를 이용하여 측정하였고, 수위는 80GHz의 레이더 주파수를 사용하여 왕복 시간을 거리로 환산하여 측정하였다. 유량은 각각의 유속계에 단면을 입력해 놓으면 유속분포법, 중간단면적법 및 지표유속법을 적용하여, 각각의 측선에 대한유량과 총 유량을 산출하였다. 그 결과, 기존 방식 대비 상당한 개선 효과를 확인하였고, 향후 환경부 등 중앙부처의 수문조사 사업에서 그 역할이 기대된다.

• Convergence Security Journal
• /
• v.23 no.4
• /
• pp.81-92
• /
• 2023

In recent years, the ROK military is promoting Defense Innovation 4.0 with the goal of fostering strong military based on science and technology equipped with artificial intelligence(AI) to prepare for the upcoming population cliff. In particular, at the present time of increased threats of North Korea, the South Korean military is seeking to deal with a decrease in military service resources through the introduction of a Scientific Guard System using advanced technology. TICN which is a core basic communication system to ensure the integrated combat capability of the ROK military is, however, limited to use as a based network for the emerging Scientific Guard System due to the narrow transmission bandwidth with widely spread poor reception area. To deal with this problem, this paper proposes TVWS-based Scientific Guard Systems with TVWS-based wireless network construction technology that has been available for free in Korea since 2017. The TVWS-based Scientific Guard System proposed in this paper, when compared to the existing wired network-based Scientific Guard Systems, has various advantages in terms of minimizing operational gaps, reducing construction costs, and flexibility in installation and operation.

• Journal of the Korea Society of Computer and Information
• /
• v.29 no.3
• /
• pp.117-125
• /
• 2024

In this paper, implement and propose an Active Electronically Scanned Array (AESA) radar integration analysis system which specialized for radar development by using heterogeneous media. Most analysis systems are used to analyze and improve the cause of defects, so they help the test easier. However, previous log analysis systems that operate only based on text are not intuitive and difficult to find the information user want at once if there is a lot of log information. so when an equipment defect occurs, there are limitations in analyzing the cause of defect. Therefore, the analysis system in this paper utilizes heterogeneous media. The media defined in this paper refers to recording text-based data, displaying data as image or video and visualizing data. The proposed analysis system classifies and stores data that transmitted and received between radar devices, radar target detection and Tracking algorithm data, etc. also displays and visualizes radar operation results and equipment defect information in real time. With this analysis system, it can quickly provide information what user want and assistance in developing high quality radar.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.3
• /
• pp.32-39
• /
• 2009

In this paper, system optimization design technique of an impulse ground penetrating image radar (GPIR) in time domain is proposed to improve depth resolution of the system. For the purpose, time domain analysis method of key components such as impulse generator and UWB antenna is explained and by simulation, parameters of each component are determined. In particular, by standardizing the impulse signal, spectrum efficiency of a radiated impulse signal is improved and a U-shaped planar dipole antenna for a UWB antenna is developed. By equipping a parabolic metal reflector with the proposed antenna, external noise is prevented and the ability of radiating an input impulse into ground is improved. In addition, to remove ringing effect of the propose antenna which causes serious degradation of the system performance, resistors are loaded at the edge of the antenna and then Tx and Rx UWB antennas are optimized by simulation in time domain. For images of targets buried under the ground migration technique is applied and influence of tough ground surface on distortion of received impulse signals is reduced using technique of noise and signal distortion reduction in time domain and its time resolution is enhanced. To verify the design optimization procedure, a prototype of an GPIR and an artificial test field are made. Measurement results show that the resolution of the system designed is as good as that of a theoretical model.