• Journal of the Korean Society of Radiology
• /
• v.84 no.2
• /
• pp.361-371
• /
• 2023

The success of image-guided breast biopsy depends on the biopsy method, needle selection, and appropriate technique based on the accurate judgment by the radiologist at biopsy. However, insufficient or inappropriate sampling of specimens may result in false-negative results or pathologic underestimation. Therefore, image-pathology concordance assessments after biopsy are essential for appropriate patient management. Particularly, the assessment of image-pathology concordance can avoid false-negative reports of breast cancer as a benign pathology. Therefore, this study aimed to discuss factors that impact the accurate interpretation of image-guided breast biopsy along with the appropriate assessments.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.6
• /
• pp.1363-1368
• /
• 2011

This paper describes an analysis on the granular noise in pixel-to-pixel mapping-based computational integral imaging. The pixel mapping-based method provides a high-resolution reconstructed images and also its computational cost is very lower than the previous back-projection-based method. In this paper, a signal model for the pixel mapping-based method is introduced, which defines and analyzes the granular noise. Computer experiments provides the granular noise properties based on the proposed signal model. The experimental results indicates that the granular noise pattern differs from that of the back-projection based method. The results is also utilized in the pixel mapping-based method.

• Journal of Biomedical Engineering Research
• /
• v.20 no.4
• /
• pp.503-513
• /
• 1999

A general expression for the beam patterns of various synthetic aperture(SA) techniques was derived based on a unified SA model. This model was used to analyze and compare the performance of existing SA methods. Based on the theoretical studies, we propose a new synthetic aperture technique that is best suitable for the linear-scan imaging. The proposed method enables dynamic tow-way focusing in real imaging so that the B-mode image resolution can be greatly improved. Compared to the conventional focusing technique, the focused beam pattern by the proposed shows the mainlobe width reduced by half and comparable sidelobe levels. Computer simulation results demonstrated the validity of the theoretical analysis and the proposed SA method.

• Journal of IKEEE
• /
• v.7 no.1 s.12
• /
• pp.119-126
• /
• 2003

This paper presents a methodology for constructing a surgical simulation environment for the replacement of artificial knee join using CT image data. We provide a user interface of preoperative planning system for performing complex 3-D spatial manipulation and reasoning tasks. Simple manipulation of joystick and mouse has been proved to be both intuitive and accurate for the fitness and the wear expect of joint. The proposed methodology are useful for future virtual medical system where all the components of visualization, automated model generation, and surgical simulation are integrated.

• Korean Journal of Remote Sensing
• /
• v.23 no.2
• /
• pp.103-111
• /
• 2007

The spectral information based image analysis, visual interpretation and automatic classification have been widely carried out so far for remote sensing data processing. Yet recently, many researchers have tried to extract the spatial information which cannot be expressed directly in the image itself. Using the texture and wavelet scheme, we made a wavelet-based texture fusion image which includes the advantages of each scheme. Moreover, using these schemes, we carried out image classification for the urban spatial analysis and the geological structure analysis around the caldera area. These two case studies showed that image classification accuracy of texture image and wavelet-based texture fusion image is better than that of using only raw image. In case of the urban area using high resolution image, as both texture and wavelet based texture fusion image are added to the original image, the classification accuracy is the highest. Because detailed spatial information is applied to the urban area where detail pixel variation is very significant. In case of the geological structure analysis using middle and low resolution image, the images added by only texture image showed the highest classification accuracy. It is interpreted to be necessary to simplify the information such as elevation variation, thermal distribution, on the occasion of analyzing the relatively larger geological structure like a caldera. Therefore, in the image analysis using spatial information, each spatial information analysis method should be carefully selected by considering the characteristics of the satellite images and the purpose of study.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.4
• /
• pp.101-112
• /
• 1985

It is important to extract the mechanical informations from the image sequences of the moving object. We have studied the computer algorithms for analysis of the moving heart using X-ray image sequence. A new mathematical method was developed to estimate the local epicardial deformation, wall thickness, and the regional circumferential and longitudinal wall stress using biplane coronary cineangiograms. In this method, the motion images of the coronary artery bifurca-tion points were used as natural landmarks for the kinematic analysis of the ventricular deformation. In four dogs and a normal patient's coronary cineangiograms, the estimation results show the validity of the present analysis, compared with the experimental results based upon the implanted markers. Thus, the present method provides a new method of evaluating the regional wall deformation and wall stress together with the blood vessel conditions using the coronary cineangiography procedure.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.5
• /
• pp.861-868
• /
• 2017

Near band infrared imaging technique has adopted for imaging EL2 and shallow level distributions in undoped semi-insulating LEC GaAs. This technique, which relies on the mapping of near bandgap infrared transmission, is both rapid and non-destructive. Until now no quantitative analysis has been reported for near band edge region which gives the reverse contrast on EL2 absorption images. This paper presents the spectral, spatial and temperature dependence of photoquenching forward and inverse mechanism in the band edge domain for cells and walls and for direct and inverted contrast conditions during transitory regimes. The difference in the threshold for the EL2w and EL2b defects could be attributed to the contribution of a different electrical assistance due to a different species of impurities. Quantitative analysis results show an increased density of EL2w and a small reduction of EL2b in the region of the walls where there is a high density of dislocations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.13 no.6
• /
• pp.490-500
• /
• 1988

In recent years the acquisition, processing and interpretation of three dimensional seisimic data, for the purpose of locating gas and reservoirs, have become practical. This paper exlores one way in which the volume data can be searched and visualized, which may aid the interpreter. The illusion of looking at a three dimensional volume can be obrained by fusing a stereoscopic pair of pictures. Each picture can be made by projecting each data point of the volume into a plane from a point where the eye is placed. The data valuse along any projection line can be summed to form the picture, or only a segment along the line can be selected. By selective projection, the volume can be searched and obscuring layers removed. The stereoscopic pictures show the physical models in there ture spatial positions. Projection of the envelope function of the seismic traces is shown to give improved depth perception compared with projection of the position amplitudes.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2007.06a
• /
• pp.183-187
• /
• 2007

텔레매틱스에서 킬러 애플리케이션으로 부상하고 있는 내비게이션 서비스는 현재의 2D 내비게이션에서 발전하여, 일본의 경우에는 3차원 건물 데이터를 이용한 3D 내비게이션 제품이 나와 있다. 또한 2D 내비게이션과 3D 내비게이션과는 별도로 위성영상사진을 이용한 위성영상 기반 내비게이션이 있다. 이러한 경향은 운전자가 운전하고 있는 그대로의 모습을 보여주려는 시도이며, 이러한 시도 중에는 카메라를 이용한 실감 내비게이션 기술이 있다. 실감 내비게이션 기술은 카메라로부터 영상을 획득하여, 기존의 안내정보와 영상으로부터 획득되는 영상정보를 해석하여 운전자에게 필요한 정보를 생성하여 이를 운전자가 보고 있는 단말의 화면에 보여주는 기술로서, 기존의 전자지도를 보고 운전하면서 해석의 어려움을 느낀 운전자에게 큰 도움이 될 것으로 보인다. 이러한 실감 내비게이션을 위해서는 운전자의 운전환경에 맞게 안내정보를 화면에 정확하게 표현하는 기술이 필요하다. 이를 위해서는 다양한 분기점(교차로 상황, 지하차도 상황, 고가도로 상황, 차로변경 상황등)에 대한 표현전략과 다양한 운전환경(터널, 비, 주간, 야간)에 대한 표현전략이 필요하다. 본 논문에서는 각 상황별로 표현을 위해 필요한 데이터와 이를 이용한 표현결과를 제공하고자 한다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.19 no.1
• /
• pp.77-83
• /
• 2001

To product the map by terrestrial photogrammetry method, a few rather nuisance stereo image acquiring processing and plot using expensive analytical instruments have to be performed. In this study, plot was made by acquiring and rectification image using simple method rather than above it. For this, geometry rectification system was constructed for the generation of single ortho-image analysis. and these ortho-images of architecture were made and analysed by appling various warping methods. As a result, the performance of single image analysis could be estimated, and it is expected that the application of this is possible to various non-topographic photogrammetry.