• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.2
• /
• pp.188-194
• /
• 2010

In this paper, the typical Synthetic Aperture Radar (SAR) image quality parameters and analysis method are defined, and the SAR image analysis tool is presented for SAR image evaluation. The structure of the developed SAR image analysis tool consists of four key modules; point target analysis (PTA) module, distributed target analysis (DTA) module, ambiguity analysis (AMA) module, and NESZ analysis (NESZA) module. The developed tool is able to extract the various SAR system parameters from standard SAR product format files. Based on these extracted system parameters, typical SAR image quality parameters are derived from SAR image data.

• Spatial Information Research
• /
• v.9 no.1
• /
• pp.1-13
• /
• 2001

Nowadays, SAR Interferometry is actively being studied as a new technique in topographic mapping using satellite imagery. It extracts height values using phase information derived by two SAR imageries covering same areas. Unlike when using SPOT imagery, it is not affected by atmospheric conditions and time. So to speak, we can say that SAR Interferometry is flexible in imagery acquisitions and can get height data economically over wide area. So, it is expected that SAR Interferometry will be widely using in GIS applications. But, in some area occurring geometric distortion, height data are misjudged or not extracted depending on phase unwrapping algorithms. IN the case of ERS tandem data, the accuracy of height data was worst in mountain area. It is the because of the short incidence angle resulted in layover effect. Of the phase unwrapping algorithms, path-following was better in height accuracy but could not get data in layover area. In this area, we could get height data using Height Sensitivity. In concludion, we could get DEM that maintained the accuracy of path-following method and have overall data across imagery.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2000.06a
• /
• pp.67-76
• /
• 2000

Recently, SAR Interferometry method is actively being studied as a new technic in topographic mapping using satellite imageries. it extract height values using two SAR imageries covering same areas. Unlike when using SPOT imageries, it isn't affected by atmospheric conditions and time. But it is difficult to process radar imageries and the height accuracy is very low where relief displacements are high. In this study, we produced DEM(Digital Elevation Model) using ERS-1, ERS-2 tandem data and analysed the height accuracy over 14 ground control points. The mean error in height was 14.06m. But when using airborne SAR data, it Is expected that we can produce more accurate DEM which will be able to ue used in updating 1/10,000 or 1/25,000 map.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.4C
• /
• pp.350-357
• /
• 2010

In this paper, we present an auto-range fast bilateral filter (FBF) for high-dynamic-range (HDR) images, which increases computation speed by using adaptive standard deviations for range filter (RF) of FBF in iCAM06. Many images that cover the entire dynamic range of the scene with different exposure times are fused into one High Dynamic Range (HDR) image. The representative algorithm for HDR image rendering is iCAM06, which is based on the iCAM framework, such as the local white point adaptation, chromatic adaptation, and the image processing transform (IPT) uniform color space. FBF in iCAM06 uses constant standard deviation in RF. So, it causes unnecessary FBF computation in high stimulus range with broad and low distribution. To solve this problem, the low stimulus image and high stimulus image of CIE tri-stimulus values (XYZ) divided by the threshold are respectively processed by adaptive standard deviation based on its histogram distribution. Experiment results show that the proposed method reduces computation time than the previous FBF.

• The Magazine of the IEIE
• /
• v.23 no.10
• /
• pp.38-52
• /
• 1996

본 원고에서는 원격탐사용으로 사용되는 레이다 중에서 가장 많이 사용되는 Scatterometer에 대해 소개하였다. SAR는 주로 넓은 지역의 레이다 영상을 얻는데 사용되는 소위 영상레이다로서, 기본 구성품은 일반적인 레이다와 크게 다를 바 없으며 거의 모든 부분에서 현재의 state-of-the-art를 크게 벗어나는 요구사항은 없다고 판단된다. 단지 아주 작은 분해능(수십cm정도)을 실시간으로 요구할 때에는 막대한 계산량으로 인한 신호처리에서의 병목 현상을 적절히 해결해야 한다. 본 원고에서는 여러 가지의 SAR 신호처리 방식을 소개하였으며 본 대학에서 수행한 간단한 실험에 적용시킨 결과를 보였다. 또한 현재 많이 발표되고 있는 Interferometric SAR에 대해 간단히 소개하였으며, 마지막으로 레이다 영상으로부터 표적의 제반 특성을 추출하는 inversion algorithm을 개발하거나 기타 여러 연구에 사용될 수 있는 차량 탑재형 Scatterometer에 대해 소개하였다. 본 대학에서 개발중인 POPOS가 완성되면 지금까지 측정되거나 발표된 적이 없는 한국 특유의 표적이나 경작물들의 산란 특성($\sigma^{\circ}$)을 측정할 수 있으며, 또한 현재 관심의 대상이 되고 있는 GPEN 또는 FOPEN 등의 연구에도 크게 도움이 될 수 있으리라 기대된다.

• Journal of KIISE:Software and Applications
• /
• v.26 no.11
• /
• pp.1350-1358
• /
• 1999

이 논문에서는 유전밴드 영상신호에 포함되어 있는 지형적 특징을 이용하여 밝기의 변화가 일정하지 않은 유전밴드를 인식하는 방법을 연구하였다. 유전밴드는 동일인을 식별하는데 있어서 지문보다 높은 신뢰성을 가지고 있으므로, 유전밴드 영상에서 유전밴드의 유무와 위치를 자동적으로 검출하는 것은 매우 중요하다. 레인내의 밝기의 변화가 일정한 유전밴드는 미분연산자에 의해 검출할 수 있지만, 밝기의 변화가 일정하지 않은 레인내의 유전밴드는 일반적인 인식방법에 의해서는 검출하기 어렵다. 따라서 유전밴드 영상으로부터 지형적 특징을 추출하고, 이것으로부터 계산한 곡률(curvature)의 크기에 의해 유전밴드를 인식함으로써 레인의 밝기가 변화하는 경우에도 효과적으로 인식하였다.Abstract This paper presents recognition of DNA band using the topographical features of DNA band images. The DNA band provides a more reliable way of identification than fingerprints. Recognition based on differentiation operators can easily detect the DNA band if the brightness of lane in the image is almost uniform. When the brightness of the lane changes gradually, the DNA bands are hard to be recognized. Using the curvature magnitude of the lane computed from topographic features extracted from DNA images, the DNA bands are efficiently recognized in the lane whose brightness changes.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.6
• /
• pp.101-109
• /
• 2016

The images captured by digital still cameras or mobile phones are not always satisfactory because the devices have limited dynamic ranges compared with that of the real world. To cope with the problems, tone mapping function based methods and retinex theory based methods are studied. However, these methods generate a halo artifact or limited enhancement of global and local contrasts. The proposed method estimates illumination information used for image enhancement by optimizing a dynamic range of input image. The estimated illumination information has smoothness characteristic where the luminance is flat and does not have where the luminance changes to prevent the halo artifact. Additionally, the estimated illumination information and surrounding pixel values are considered when the tone mapping function is applied to overcome the limitations of the conventional tone mapping function approach. Experimental results show that the proposed algorithm outperforms the conventional methods on objective and subjective criteria.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.3
• /
• pp.117-124
• /
• 2002

A high speed data link capability is one of the critical factors in determining the performance of the spaceborne SAR system with high resolution because of the strict requirement for the real-time data transmission of the massive SAR data in a limited time of mission. In this paper, based on the data link model characterized by the spaceborne small SAR system, the high rate multi-channel data link module is designed including link storage, link processor, transmitter, and wide-angle antenna. The design results are presented with the performance analysis on the data link budget as well as the multi-mode data rate in association with the SAR imaging mode of operation from high resolution to the wide swath. The designed data link module can be effectively used for the spaceborne and airborne applications which requires to expand the high speed data link capability.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.6
• /
• pp.564-571
• /
• 2015

In this paper, we propose a multiple-input, multiple-output(MIMO) interferometric radar network system to generate three-dimensional (3-D) MIMO interferometric inverse synthetic aperture radar(InISAR) image. In the MIMO interferometric radar network system, the MIMO InISAR image can be formed by an incoherent summation of multiple bistatic InISAR images that show 3-D scatterers of a target observed at different bistatic interfermetric configurations, respectively. Because bistatic-sccattering physics of a target at different viewpoints are visible in the 3-D MIMO InISAR image, it can provide various scatterering physics properties of a target, and can be used for target classification as a useful feature vector. Simulations validate that our proposed method successfully finds locations of scatterers of a target in MIMO radar interferometric network system.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.37 no.2
• /
• pp.28-38
• /
• 2000

This paper proposes a fractal compression method using the domain classification and local searching, which utilize DCT coefficient characteristic Generally, the fractal Image encoding method has a time consuming process to search a domain to be matched with range block In order to reduce computation complexity, the domain and range regions are respectively classified into 4 category by using the characteristics of DCT coefficients and each range region is encoded by a method suitable for the property of its category Since the bit amount of the compressed image depends on the number of range blocks, the matching of domain block and range block is induced on the large range block by using local search, so that compression ratio is increased by reducing the number of range block In the local search, the searching complexity is reduced by determining the direction and distance of searching using the characteristics of DCT coefficients The experimental results shows that the proposed algorithm have 1 dB higher PSNR and 0 806 higher compression ratio than previous algorithm.