• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.369-374
• /
• 2002

최고급 품질의 홍삼제조를 위한 공정을 개발하고자 건조기를 제작하였다. 건조기는 온도, 습도의 계측이 가능하고 이를 컴퓨터와 연결하여 사용자가 원하는 온도, 습도로의 제어가 가능하도록 설계하열다. 건조기의 작업용량은 1회에 원료수삼 30지가 처리되도록 설계되었다. 이를 위한 건조챔버의 크기는 6년근 1등급 수삼의 크기를 고려하여 700$\times$700$\times$1500mm로 결정하였고 건조과정중의 수삼의 상태변화를 알기 위하여 건조챔버 전면에 유리를 설치하여 육안 관찰 및 영상처리장치에 의한 모니터링이 가능하도록 하였다. 수삼의 균일한 건조를 도모하기 위하여 대나무 채반을 속도조절이 가능한 모터와 체인을 이용하여 챔버 내에 서 0~10rpm의 속도로 회전되도록 설계하였다. 그리고 건조시 챔버 내의 공기상태 계측 및 제어용 프로그램을 개발하였다. 제작된 홍삼제조용 건조기의 성능 평가결과 설정된 온도와 습도를 정밀하게 계측제어 할수 있었으며, 원하는 건조수준을 유지는데 성공했다. 건조기 내부에서의 온도 분포와 풍속분포를 SAS통계 package GLM을 이용하여 유의수준 5%의 범위에서 Student T~test를 한결과, 계측지점간의 유의 차가 없어 온도와 풍속의 분포가 균일한 것으로 나타났다.

• Journal of the Korean Society of Industry Convergence
• /
• v.21 no.6
• /
• pp.389-394
• /
• 2018

Remotely operated vehicle(ROV) and autonomous underwater vehicle(AUV) have been used for underwater surveys, underwater exploration, resource harvesting, offshore plant maintenance and repair, and underwater construction. It is hard for people to work in the deep sea. Therefore, we need a vision control system of underwater submersible that can replace human eyes. However, many people have difficulty in developing a deep-sea image control system due to the deep sea special environment such as high pressure, brine, waterproofing and communication. In this paper, we will develop an Ethernet based remote image control system that can control the image mounted on ROV.

• The korean journal of orthodontics
• /
• v.35 no.3 s.110
• /
• pp.163-173
• /
• 2005

The purpose of this study was to compare the asymmetric degree between maxillofacial hard and soft tissues in individuals with facial asymmetry. Computerized tomographies (CT) of 34 adults (17 male, 17 female) who had facial asymmetry were taken. The CT images were transmitted to personal computers and then reconstructed into three-dimensional (3D) images through the use of computer software. In order to evaluate the degree of facial asymmetry, 6 measurements were constructed as the hard tissue measurements while 6 counterpart measurements were taken as the soft tissue measurements. The means and standard deviations were obtained for each measurement using 3D measure, then t-test was used to investigate the differences between each hard tissue measurement and the corresponding soft tissue measurement All measurements used in the present study showed statistically significant differences between the hard and soft tissues. The degree of soft tissue asymmetry was smaller than that of corresponding hard tissue asymmetry in case of chin deviation, frontal ramal inclination difference, and frontal corpus inclination difference. On the other hand, the degree of soft tissue asymmetry was greater than that of underlying hard tissue asymmetry in the measurement of lip canting and lip cheilion height difference The present study suggests that asymmetric differences of hard and soft tissue is observed nu facial asymmetric subjects and thus soft tissue analysis is needed in addition to hard tissue analysis when making an evaluation of facial asymmetry.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.45 no.1
• /
• pp.65-74
• /
• 2018

The aim of this study was to obtain the traceability of the software used to analyze lateral cephalometry and to calculate the uncertainty of the measurements. Furthermore, this study aimed to provide a basis for obtaining standard references for measurement values for orthodontic treatment in children. Cephalometric data were collected from 100 children diagnosed with class I malocclusion between the ages 6 to 13 years who visited the pediatric dentist at Seoul National University Dental Hospital. To ensure traceability, a phantom device was created. Correction values were calculated by measuring the length and angle of the phantom device using the software. Type A uncertainty was calculated by obtaining the standard deviation of cephalometric measurements of 100 persons and the standard error of repeated measurements. Determination of the type B uncertainty was induced by minimum resolution and the position of the head. Using these, the combined standard uncertainty was obtained and the expanded uncertainty was calculated. The results of this study confirm that the currently used software has high accuracy and reliability. Furthermore, the uncertainty of orthodontic measurements in Korean children aged 6 to 13 years was calculated, and distribution range for class I malocclusion with 95% confidence interval was suggested.

• Journal of the Society of Disaster Information
• /
• v.16 no.1
• /
• pp.79-86
• /
• 2020

Purpose: In this study, a model was developed to estimate the storage in Cheonan reservoir using images taken by Sentinel-1 satellite. Method: A total of three reservoirs were studied. All three reservoirs are small reservoirs whose water level is being measured. The preprocessing of Sentinel-1 images was done using SNAP distributed by the European Space Agency(ESA), and the storage was estimated by classifying water surface by the threshold classification method. The estimated reservoir area was compared with satellite and drones images taken on the same day. The correlation was derived by comparing the estimated reservoir area with the actual measurement. Results and Conclusions: The storage values estimated by satellite image analysis showed similar values to the actual measurement data. However, because of the underestimation of the reservoir area due to green algae and Epilithic diatom of summer reservoirs and the low resolution of satellite images, it is dificult to detect reservoir area by satellite images less than 10,000㎡.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.15-15
• /
• 2017

하천의 수위와 유량 등의 수리량 자료는 치수, 이수, 환경 등에 관한 하천 계획과 관리의 기초자료로 활용된다. 따라서 체계적인 하천 관리를 위해서는 신뢰성 있는 하천 수리량 자료의 확보가 요구된다. 이에 따라 우리나라에서는 많은 하천에 수위 관측소를 설치하여 실시간 수위를 측정하고 있다. 하지만 유량의 측정은 국가하천 등 주요 대규모 하천에 국한되어 있는 실정이다. 반면에 우리나라 대부분의 홍수 피해는 중 소하천에서 발생하고 있지만, 중 소하천에 대한 수문조사는 상대적으로 매우 미진한 실정이다. 이러한 중 소하천에 대한 수리 정보 조사의 가장 큰 어려움은 대부분의 중 소하천이 지방자치단체에서 관리하고 있어 예산과 인력 지원이 어렵기 때문이다. 이에 본 연구에서는 중 소하천에 산재한 보와 같은 하천 횡단 구조물의 유량 측정 기능을 이용하고, 급성장하고 있는 영상 분석 기술과 IT를 하천공학 분야에 접목하여 중 소하천의 수리 정보를 저비용, 실시간으로 원격 측정하는 시스템을 개발하고자 하였다. 이를 위해 연구에서는 저가형 영상 장비를 이용하여 하천 횡단구조물 주변의 흐름 영상을 원격으로 확보하고, 해당 영상을 데이터베이스로 송신하는 장치인 WIA 시스템(wireless image acquisition system)을 개발하였다. 그리고 촬영된 영상을 분석하여 수위를 도출하는 영상 분석 프로그램, 수위-유량 관계 곡선(rating curve), 미계측 지점에 대한 하천 수리 정보를 계산하기 위한 HEC-RAS를 포함하는 River-HQ 시스템을 개발하였다. 개발된 WIA & River-HQ 시스템은 한국건설기술연구원 하천실험센터 내 직선 수로(실규모 하천) 구간에 대하여 정확성이 검증되었다. 이러한 WIA & River-HQ 시스템은 실제 하천에 대한 적용성과 안정성 검토를 통해 향후 중 소하천의 환경 관리와 홍수예경보 업무 등에 활용될 수 있을 것으로 판단된다.

• The korean journal of orthodontics
• /
• v.35 no.6 s.113
• /
• pp.409-419
• /
• 2005

Studies for diagnostic analysis using three-dimensional (3D) CT images are recently in progress and needs for 3D craniofacial analysis are increasing in the fields of orthodontics. It is especially essential to analyze the facial soft tissue after orthodontic treatment and orthognathic surgery. In this study 3D CT images of adults with normal occlusion were taken to analyze the facial soft tissue. Norms were obtained from CT images of adults with normal occlusion (12 males, 11 females) using a computer program named V works 4.0 program. 3D coordinate planes were established using soft tissue Nasion as the reference point and a total of 20 reproducible landmarks of facial soft tissue were obtained using the multiple reconstructive sectional images (axial, sagittal and coronal images) of the V works 4.0 program: soft tissue Nasion, Pronasale, Subnasale, Upper lip center, Lower lip center, soft tissue B, soft tissue Pogonion, soft tissue Menton, Endocanthion (Rt/Lt), Alare lateralis (Rt/Lt), Cheilion (Rt/Lt), soft tissue Gonion (Rt/Lt), Tragus (Rt/Lt), and Zygomatic point (Rt/Lt). According to the established landmarks and measuring method, the 3D CT images of adults with normal occlusion were measured and the normal positional measurements and their Net (${\delta}=\sqrt{{X^2}+{Y^2}+{Z^2}}$) values were obtained using V surgery program, In the linear measurement between landmarks, there was a significant difference between males and females except Na' -Sn and En(Rt)-En(Lt). The normal ranges of Na'-Zy, Na'-Ch and Na'-Go' (facial depth) were obtained, which was difficult to measure by two-dimensional (2D) cephalometric analysis and facial photographs. These data may be used as references for 3D diagnosis and treatment planning for patients with malocclusion and dentofacial deformity.

• The korean journal of orthodontics
• /
• v.35 no.5 s.112
• /
• pp.388-397
• /
• 2005

The purpose of this study was to redefine the cephalometric landmarks in three-dimensional (3D) images, which are used in orthodontic cephalometric radiography, and to evaluate the reproducibility of each landmark for 3D cephalometric analysis. Eighteen CT scans were taken at the Department of Diagnostic Radiology at Seoul National University Dental Hospital and manipulated with V works 4.0(Cybermed Inc., Seoul, Korea). The coordinate system was established using 7 reference points, with no more than 4 points on the same plane. These 7 points were generated as a volume model, the voxel size of which was 4 by 4 by 2 (threshold value=639). The cephalometric landmarks were selected at the multiplanar reformation (MPR) window on the volume mode of V works 4.0. The selected landmarks were exported to V surgery (Cybermed Inc., Seoul, Korea) for the calculation of coordinate values. All the data were taken twice with a lapse of 2 weeks by one investigator The reproducibility of each landmark was $0.17\~1.21mm$ in the x axis, $0.30\~1.53mm$. In the y axis, and $0.27\~1.81mm$ in the z axis. In all three axes, the range of error was similar. These error ranges were acceptable with regards to the pixel space and slice thickness. The most reproducible points were 1 points which were selected on the basis of the volume model. The least reproducible points were J points that were defined by sutures.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.10
• /
• pp.5115-5122
• /
• 2013

This paper has studied about the development and application of landslide collapse prediction real-time monitoring system based on USN to detect and measure the collapse of landslide. The rainfall measuring sensor, gap water pressure sensor, indicator displacement measuring sensor, index inclination sensor, water content sensor and image analysis sensor are selected and these are applied on the test bed. Each sensor's operation and performance for reliability verification is tested by the instrument which is installed in the field. As the result, u-IT based real-time landslide monitoring system which is developed by this research for landslide collapse detection could minimize life and property damages because it makes advance evacuation with collapse risk pre-estimate through real-time monitoring on roadside cut and bedrock slopes. This system is based on the results of this study demonstrate the effect escarpment plan are spread throughout.

• Journal of Biomedical Engineering Research
• /
• v.20 no.2
• /
• pp.139-148
• /
• 1999

In this paper, we designed the dental surgery system based on PC. This system predict post operated 3-dimensional image, So the patient has no need to take CT after surgery and expose his body to radiological damage. We predict the post operated skull from the patient's CT with pre and post cephalometry X-ray. Our novel procedures, to register X-ray and CT, are based on anatomical landmarks, singular value decomposition. And we display the predicted image 3-dimensionally by surface rendering. We verified this system by dry skull experiment and clinical experiment. When significance level is 0.05, there is on significance.